Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Repairing a Harmochord  (Read 1718 times)

0 Members and 1 Guest are viewing this topic.

Judy Minot

  • Member
  • *
  • Offline Offline
  • Posts: 9
  • Messervier 1-row D; Minot-Pariselle D/G;
    • Best Practice: Inspiration and Ideas for Traditional Musicians
Repairing a Harmochord
« on: August 06, 2022, 07:16:47 PM »

I bought a 1960's built Harmochord/Chord Organ on Ebay for a small $. It has 8 reeds that had fallen off, one bass button/mechanism that had fallen into the bass block, and the three black piano keys that fell off. I have 0 experience fixing free reed instruments and thought this would be a great low-risk way to play around - especially as I just finished Emmanuel Pariselle's accordion building workshop (!!!).

Of course, Emmanuel doesn't use wax, he uses olovisc to make the reed blocks airtight. This Harmochord is waxed up the wazoo. When in doubt, wax it, was obviously their design motto. And lots of tiny little screws with tiny little threads that have completely stripped in the plywood.

I took off the back, removed the reeds that were half off, & cleaned up the wax. I think I will have to figure out how to wax the new reeds back on, as trying to do half olovisc will be difficult - 1) because I don't think it will stick to wood that has been waxed 2) but I'm not sure how to transition to the reeds that are holding on fine.
- any opinions here?

Next question: where to get tiny screws, accordion wax, and a wax spoon without having to buy thousands, or speak Italian?

[I struggled with whether to put this in "other free reed instruments" but my questions and the interest are mostly for people who do repairs - moderators feel free to disagree and I'll move it.]
« Last Edit: August 10, 2022, 02:09:49 PM by Judy Minot »
Logged
Author, Best Practice: Inspiration and Ideas for Traditional Musicians  www.judyminot.com/bestpractice/

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Repairing a Harmochord
« Reply #1 on: August 06, 2022, 07:35:17 PM »

Well that's an interesting project. My first impulse is to direct you to Charlie Marshall, for some wax strips/sticks and to purchase a variable power soldering iron as you haven't got a lot of space between the reed plates there so running wax between them to seal both would be my instinct. However there are people on here who know far more about such things than me  so I would wait for further advice. First move though is to thoroughly clean the block, making sure that you don't get debris inside the block as this can cause more problems.

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Repairing a Harmochord
« Reply #2 on: August 07, 2022, 12:13:22 AM »

Nice little organ.  I have one of the "suitcase" models that includes 3 poles to screw into the base...

It sounds like you're interested in going with the Italian spoon method, and I support that.  Once you get used to it, it's very versatile.  I used to buy wax from Bossetto on eBay here in the US - high quality stuff.  There are various sellers from different countries out there on eBay selling bricks of the stuff.  (I make my own now.)

I also made my own wax spoon by cutting and sharpening a P-shaped piece of metal, and fixing it in a handle.  But they can also be had for money.
https://www.ebay.com/itm/172525644813

This seller, "akkordeonwelt," is one I've had only good experiences with.
https://www.ebay.com/sch/akkordeonwelt/m.html

I also use eBay when I need tiny screws (China seems to have lots of them).  But I'm not sure you'll really need screws, or pins for that matter, even though the original design included them.  Bin the pins!  (http://forum.melodeon.net/index.php?topic=24907.msg304741#msg304741)

By the way, one potential difficulty with the Italian spoon method for this kind of instrument is that you can't use one hand to move the reedblock as you use the other to keep the spoon at the correct tilt.  You might have to get creative, perhaps by propping the instrument up at different angles and waxing all the stripes that lie in a particular direction, then rotating it.
« Last Edit: August 07, 2022, 12:16:09 AM by Gonk »
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Repairing a Harmochord
« Reply #3 on: August 07, 2022, 08:32:55 AM »

... I'm not sure how to transition to the reeds that are holding on fine.
- any opinions here?

Wax degenerates over time. The reeds that still look attached are probably not that secure. Definitely go the whole hog and re-wax the lot. Think of it as an important part of a properly done refurbishment, Don't just bodge a running repair.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Repairing a Harmochord
« Reply #4 on: August 07, 2022, 09:24:20 AM »

My vote is for wax sticks and a soldering iron. It works very well and is easier to get the hang of than a wax spoon…which also requires a means to heat the wax etc ….which is a much bigger deal than using the wax sticks (for starters…you need a lot more wax, it gets everywhere etc). I use the sticks for little repairs and replacing the odd reed here and there. It’s probably the cheapest way to go. If you are squeezing a reed down between others, put a bead of wax down first (not too much) and push the plate on. The wax takes a while to go solid and is sticky while it cools. At the end of the day it’s there to stick the reeds down and ensure a seal, so you don't need great big beads of the stuff. Others will have a different opinion on this, obvs, but this is how I’d go about it.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Repairing a Harmochord
« Reply #5 on: August 07, 2022, 09:52:21 AM »

I do most of my own repairs and conversions, and would second Roger's advice.
I've just bought a 2nd hand 'Remploy' soldering iron for £2 at the local car boot sale, to replace my old one after about 6 years of use. It's easy and not too messy, although probably too slow for the professionals amongst us when doing full re-waxes.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Judy Minot

  • Member
  • *
  • Offline Offline
  • Posts: 9
  • Messervier 1-row D; Minot-Pariselle D/G;
    • Best Practice: Inspiration and Ideas for Traditional Musicians
Re: Repairing a Harmochord
« Reply #6 on: August 07, 2022, 05:50:01 PM »

Ah, this is all very cool advice. I thought I would go for the spoon method after being told by Theo that was the best, however it does sound a bit tricky and he did warn me of that (!).

Another question about the reed block - I agree with Greg that all the wax is probably brittle at this point. I would love to take the reed block off, take all the reeds off and do a proper job, however it is glued on :|bl :-[  also "secured" with tiny useless nails for good measure.

So I will be doing this whole job (scraping, waxing) directly over the openings for the pads which is mighty scary and makes me want to minimize (that's "minimise" for you English types) the work ....unless someone knows the secret to ungluing glue of unknown provenance...?
Logged
Author, Best Practice: Inspiration and Ideas for Traditional Musicians  www.judyminot.com/bestpractice/

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Repairing a Harmochord
« Reply #7 on: August 07, 2022, 06:29:13 PM »

Slide a sheet of paper under the pallets then if any wax spills it will limit the spread.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Judy Minot

  • Member
  • *
  • Offline Offline
  • Posts: 9
  • Messervier 1-row D; Minot-Pariselle D/G;
    • Best Practice: Inspiration and Ideas for Traditional Musicians
Re: Repairing a Harmochord
« Reply #8 on: August 17, 2022, 09:32:03 PM »

Thank you all for your advice. I am going to move forward with Beeswax, soldering iron,  paper, tiny screws (no pins next to the reeds but there are tiny screws elsewhere.) will try to post pics here
Logged
Author, Best Practice: Inspiration and Ideas for Traditional Musicians  www.judyminot.com/bestpractice/

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Repairing a Harmochord
« Reply #9 on: August 17, 2022, 09:40:40 PM »

Thank you all for your advice. I am going to move forward with Beeswax, soldering iron,  paper, tiny screws (no pins next to the reeds but there are tiny screws elsewhere.) will try to post pics here
Please don't use beeswax, it will go everywhere. You must use proper reed wax

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Repairing a Harmochord
« Reply #10 on: August 17, 2022, 11:43:39 PM »

Thank you all for your advice. I am going to move forward with Beeswax, soldering iron,  paper, tiny screws (no pins next to the reeds but there are tiny screws elsewhere.) will try to post pics here
Please don't use beeswax, it will go everywhere. You must use proper reed wax

Reed wax and nails suitable for your task are easily available from Charlie Marshall of CGM Music, at a reasonable price. Reed wax is not pure bees wax, it has a resin incorporated into it. A websearch will find other suppliers, but Charlie's pretty good.

http://www.cgmmusical.co.uk/CGM_Musical_Services/Reed_Wax_Nails.html#1
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Judy Minot

  • Member
  • *
  • Offline Offline
  • Posts: 9
  • Messervier 1-row D; Minot-Pariselle D/G;
    • Best Practice: Inspiration and Ideas for Traditional Musicians
Re: Repairing a Harmochord
« Reply #11 on: September 13, 2022, 02:18:12 PM »

I have purchased proper reed wax, no worries! I considered trying to make my own (I have so many beekeeping friends) but the fire hazards and other cautions posted by users here made me decide to go for premade wax. Still waiting for it to show up 2 weeks later. It is certainly harder to come by melodeon parts and repair supplies here in the U.S.
Logged
Author, Best Practice: Inspiration and Ideas for Traditional Musicians  www.judyminot.com/bestpractice/

Judy Minot

  • Member
  • *
  • Offline Offline
  • Posts: 9
  • Messervier 1-row D; Minot-Pariselle D/G;
    • Best Practice: Inspiration and Ideas for Traditional Musicians
Re: Repairing a Harmochord
« Reply #12 on: September 24, 2022, 02:35:44 PM »

Finished. A great project on which to attempt waxing for the first time. Pretty embarassing results, but here is a pic - I used a wood burning tool, which has a nice, narrow point and worked very well.

I replaced the one disintegrated gasket with olovisc, reused all the teeny screws despite some of them having torn up the underlying plywood so they don’t really hold.

Here is a link to it being played
https://youtu.be/khr9RH5IpGs
Logged
Author, Best Practice: Inspiration and Ideas for Traditional Musicians  www.judyminot.com/bestpractice/

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Repairing a Harmochord
« Reply #13 on: October 07, 2022, 12:50:16 AM »

Hey, if it works!

Nice going.  It sounds as it should.  I do have to say it is disorienting seeing one thing in the video and hearing another.  If I squint, it works out great..

Edit: Just noticed who I was talking to.  Hi Judy, it was great playing with you at NESI!
« Last Edit: October 07, 2022, 12:52:23 AM by Gonk »
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal