Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4   Go Down

Author Topic: How would a student get into fettling/melodeon repair?  (Read 9273 times)

0 Members and 1 Guest are viewing this topic.

Ben Prout

  • Member
  • *
  • Offline Offline
  • Posts: 41
How would a student get into fettling/melodeon repair?
« on: August 11, 2022, 02:55:20 PM »

I'm 19, so not really able to buy a bunch of tools and just have a go in my shed...we don't have a shed!

Does anyone have any idea how I could get into melodeon repair with guidance, I don't really trust myself to take it from a book, and I'm not particularly handy but I'm very passionate about these instruments and it'd be a great skill to have.
Logged
Acting and squeezeboxin’
Saltarelle Neuilly and Berry D/G, Hohner Pokerwork G/C and plenty of those silly things with frets

Brian Wyneken

  • Good talker
  • **
  • Offline Offline
  • Posts: 53
Re: How would a student get into fettling/melodeon repair?
« Reply #1 on: August 11, 2022, 06:00:47 PM »

I dabble in repair (and am pretty cautious about it). The sources that I used to get started are Rich Edwards "Kitchen Table Melodeon" (YouTube)and Lester Bailey's website. I did buy a broken-down accordion for the bellows to make a simple tuning table, and I think my total investment in tools is pretty modest. Rich goes through the tools and materials in one of his videos.

A dedicated toolbox and any area for workspace can serve in lieu of a shed/shop, but it helps if others you live with are willing to cooperate in your pursuit.

Good luck!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How would a student get into fettling/melodeon repair?
« Reply #2 on: August 11, 2022, 06:10:45 PM »

As a minimum you need a table or other work surface.  Ideally where you can sit with your knees under the table for comfort.  A bit of space to lay out parts is also quite important.  That can be a large tray that you can put away between sessions.
Tools you need to get started are quite modest.  A couple of good quality screwdrivers,  a puller for removing bellows pins. If you plan to try tuning you need a support plate, and a reed hook, both of which you can make.  You will also need a scratcher and at least one small high quality file, either diamond fine grit, or traditional Swiss needle file.
A tuning bellows is useful for your investigating reeds that don’t work but is not essential.   

Dive in, have a go, that’s how I started.
« Last Edit: August 11, 2022, 06:12:21 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: How would a student get into fettling/melodeon repair?
« Reply #3 on: August 11, 2022, 06:48:46 PM »

Buy the best quality tools you can nearly afford, as you need them. You won't regret it.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Dennis Steckley

  • Good talker
  • **
  • Offline Offline
  • Posts: 77
  • Club System!
Re: How would a student get into fettling/melodeon repair?
« Reply #4 on: August 11, 2022, 07:17:35 PM »

If you're on the US side of the pond, Scott Bellinger offers periodic workshops on repair.  I just completed one in May, and was quite satisfied.  Scott is here on melnet.

Dennis Steckley
Logged
Hohner Victoria Club ii, Hohner Club III M, Hohner Liliput, Hohner Preciosa, Hohner Piccoletta, Hohner Overture LMMM (and three PA's, including one that is the same size as a Preciosa)

Andrew Kennedy

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 184
    • About Sword Dancing
Re: How would a student get into fettling/melodeon repair?
« Reply #5 on: August 11, 2022, 07:56:20 PM »

I don't know whether he still offers this service, but a few years ago I was talking to Pete Grassby about a repair and he offered (for a suitable price) to come to my house and show me how to do it.

I declined his offer.  I think this was after I put myself into A&E with a head injury whilst trying to change the exhaust on a Land Rover, but before I had to call the fire brigade after drilling through a gas pipe (after which I was officially relieved of diy duties).
Logged

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: How would a student get into fettling/melodeon repair?
« Reply #6 on: August 11, 2022, 10:02:38 PM »

Look out for and buy a very, very cheap old East German melodeon on eBay, or at a car boot sale, or wherever. Or ask in the Forum Buy & Sell whether someone has an unwanted/unfinished 'project box' sitting on a shelf which they'll donate to you.
Whatever you get, it will almost certainly need lots of work in different areas to get it even half playable.
Use it as your playground to learn about fixing air leaks, refacing pallets, tuning reeds, etc etc as you gather a few tools together, and before you touch a 'decent' box.

And the construction of those boxes is very similar to Hohner Pokerworks etc. You will learn a lot just taking them apart and putting them back together.

Charlie Marshall at CGM Musical Services is the go-to person for the assorted bits and pieces needed to fix up boxes. If in doubt, call him, he's very helpful and knowledgeable.

Lester's videos take you through almost every step in the process of bringing an old box back into a playable condition.

Finally, if in doubt, do ask. As well as the professional fettlers on this forum, there are many other members who have worked on their own melodeons and/or brought old ones back to life.

Have fun!!!


Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: How would a student get into fettling/melodeon repair?
« Reply #7 on: August 12, 2022, 07:35:32 AM »

Look out for and buy a very, very cheap old East German melodeon on eBay, or at a car boot sale, or wherever. Or ask in the Forum Buy & Sell whether someone has an unwanted/unfinished 'project box' sitting on a shelf which they'll donate to you.
Whatever you get, it will almost certainly need lots of work in different areas to get it even half playable.
Use it as your playground to learn about fixing air leaks, refacing pallets, tuning reeds, etc etc as you gather a few tools together, and before you touch a 'decent' box.


Indeed - the first one I took apart came from a car boot sale and cost me £2.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: How would a student get into fettling/melodeon repair?
« Reply #8 on: August 12, 2022, 07:51:30 AM »

Or an old piano accordion. Plentiful and cheap, and with lots of reeds to practise valving, waxing and tuning.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: How would a student get into fettling/melodeon repair?
« Reply #9 on: August 12, 2022, 08:53:55 AM »

Or an old piano accordion. Plentiful and cheap, and with lots of reeds to practise valving, waxing and tuning.
And one less PA in the world  :D

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: How would a student get into fettling/melodeon repair?
« Reply #10 on: August 12, 2022, 09:19:50 AM »

Everything that has been posted here is sound advice.
4 years ago I had little idea what to do and didn't want to spend on anything that I might ultimately not use.
Although I have a background in furniture design/making and have made and fettled Northumbrian small pipes since the 70s I was very much a beginner with free reeds. Now after much trial and error, and many hours (perhaps not wasted) I can strip a box and rebuild it the way I want and to sound like I want. There is still much I only half understand, but there will be someone here who has the knowledge.
I suppose I have spent £50 on dedicated gear I would not have used otherwise and most of this will last me out.
The most valuable thing is advice, and on here that is free.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: How would a student get into fettling/melodeon repair?
« Reply #11 on: August 12, 2022, 11:13:10 AM »

As a minimum you need a table or other work surface.  Ideally where you can sit with your knees under the table for comfort.  A bit of space to lay out parts is also quite important.  That can be a large tray that you can put away between sessions.
Tools you need to get started are quite modest.  A couple of good quality screwdrivers,  a puller for removing bellows pins. If you plan to try tuning you need a support plate, and a reed hook, both of which you can make.  You will also need a scratcher and at least one small high quality file, either diamond fine grit, or traditional Swiss needle file.
A tuning bellows is useful for your investigating reeds that don’t work but is not essential.   

Dive in, have a go, that’s how I started.

What is a good file grit ??
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How would a student get into fettling/melodeon repair?
« Reply #13 on: August 12, 2022, 01:06:17 PM »

For diamond files I use 600 grit file from Eternal Tools.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: How would a student get into fettling/melodeon repair?
« Reply #14 on: August 12, 2022, 01:19:51 PM »

OP:  take a look at Lesters How to Hot Rod Your Hohner YouTubes and then find that proverbial beat up, but not too beat up Pokerwork. A few improvised and purchased tools.  The whole lot could fit into a box one could set up and take down down on the dining room table!
[warning: your experience may vary regarding the dining room table]
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

dino.pafftti

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 464
Re: How would a student get into fettling/melodeon repair?
« Reply #15 on: August 12, 2022, 04:57:50 PM »

thanks, Theo and Lester,  :||:
Logged

Ben Prout

  • Member
  • *
  • Offline Offline
  • Posts: 41
Re: How would a student get into fettling/melodeon repair?
« Reply #16 on: August 13, 2022, 09:39:35 PM »

I'd like to say thank you for the outpouring of support and guidance, it's really encouraged me to have a go and tinker about. I have an old, busted, antique-shop piano accordion, surely there's no harm in taking it apart and seeing what's inside! I will certainly look at the resources provided and see where I go, thank you all very much.
Logged
Acting and squeezeboxin’
Saltarelle Neuilly and Berry D/G, Hohner Pokerwork G/C and plenty of those silly things with frets

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: How would a student get into fettling/melodeon repair?
« Reply #17 on: August 14, 2022, 08:03:41 AM »

This is a great resource, based on PAs, but it is all transferable to melodeons. If you go through the whole site you get a pretty good guide to most areas of PA maintenance.
https://accordionrevival.com/

If you want to get some basic files that don’t cost an arm and a leg, I use Draper needle files a lot. Also the sharp point or corners on the files work very well as a scratcher, so you don’t (necessarily) need to shell out for a separate tool.
https://www.ebay.co.uk/itm/Draper-82577-Needle-File-Set-Precision-Jewellers-Small-Metal-Hand-140mm-6-Pack-/302669252633?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0
Finally, here's a short video showing how to use a hook to get at the inside reed. It’s filmed on my foot pedal operated tuning table, so I have both hands free.

https://youtu.be/FMuma-gFx88

You can make a hook with a piece of piano wire and a length of dowel. Or Charley Marshall sells them (though I found the radius on the hook just a bit too big for me, which is why I made my own).
« Last Edit: August 14, 2022, 08:16:17 AM by RogerT »
Logged

Chris Harris

  • Member
  • *
  • Offline Offline
  • Posts: 36
    • The Bush Inn, A Proper Pub!
Re: How would a student get into fettling/melodeon repair?
« Reply #18 on: January 20, 2023, 05:51:35 PM »


Finally, here's a short video showing how to use a hook to get at the inside reed. It’s filmed on my foot pedal operated tuning table, so I have both hands free.

https://youtu.be/FMuma-gFx88

You can make a hook with a piece of piano wire and a length of dowel. Or Charley Marshall sells them (though I found the radius on the hook just a bit too big for me, which is why I made my own).

Hi, sorry YouTube video not available as it is private?
Logged
I have a 4th button start Dino Baffetti Black Pearl III, tuned to Anahata layout. I have a 23 button D/G with fourth button start that apart from no badge, looks like a Sandpiper Dunlin III, already converted to Anahata layout.
I was looking for a G/C box because I like French tunes and I was tempted by an almost new Hohner Pokerwork for 500 euros at a large music store in Normandy. However I saw a Lorenzy on Facebook Marketplace and I spent a lovely morning driving into Swiss Normandy and bought it. I love it, it was cheap (392 euros new), out of tune (from new I think) but lovely to play!

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: How would a student get into fettling/melodeon repair?
« Reply #19 on: January 20, 2023, 06:44:43 PM »

I'm sitting here wondering why I haven't seen this thread before now, I'm stumped!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1] 2 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal