Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3   Go Down

Author Topic: Exploring and repairing a Russian Garmoshka  (Read 2504 times)

0 Members and 1 Guest are viewing this topic.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Exploring and repairing a Russian Garmoshka
« on: August 21, 2022, 12:43:12 PM »

I have a Garmon/Garmoshka, a Russian diatonic button accordion in the key of A that I am about to (attempt to) restore. The Russian DBA differs from the more familiar Western European style DBA/melodeon/button box in a number of ways, not least of which is that it is unisoric throughout. A couple of layout diagrams found on Wikipedia might help here. The first few posts in this thread will be relatively short as pictures help to decribe the box and its' innards far better than anything I can put into words.

The layout diagrams use sol fa, in this case Do = A. The octaves of the various notes will be shown in a pic of the existing tuning scheme to be posted shortly.
« Last Edit: August 21, 2022, 12:49:57 PM by Pete Dunk »
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #1 on: August 21, 2022, 12:43:49 PM »

Bass end.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #2 on: August 21, 2022, 12:45:58 PM »

The Garmoshka.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #3 on: August 21, 2022, 01:18:35 PM »

Opening the box up gave me a few surprises, a combination of innovative design (my observation based on my limited experience) and crude execution. Before we get down to the nitty-gritty, let's take a peek inside. First surprise was the reed blocks, made from plastic. My initial reaction was to recoil in horror but actually they are pretty cool and really well made. 13 reed pairs on the outer row and 12 on the inner row, the chamber sizes are carefully tapered and the bottom ports are huge allowing much better access to the inside reed from below. The waxing is a bit of a horror show because the wax is way too soft and the plates can be moved around at room temperature. Don't try to flip the inner reed out when tuning because you'll pull the plate straight off the block!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #4 on: August 21, 2022, 01:19:39 PM »

More pics.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #5 on: August 21, 2022, 01:22:21 PM »

The blocks are mounted on fairly thick, firm rubbers gaskets.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #6 on: August 21, 2022, 01:23:15 PM »

Inside the bass end.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #7 on: August 21, 2022, 01:25:13 PM »

The ends of the reed blocks have little 'pips' to locate the simple hold down brackets, a surprising small detail.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Exploring and repairing a Russian Garmoshka
« Reply #8 on: August 21, 2022, 02:59:16 PM »

It looks quite...effectively made, apart from what I assume to be post-manufacture fettling. Using what seems to be something like bee's wax for the job was mentioned in a recent discussion. This could be good (erm, bad) example of why not to do that.

Are you at all tempted to turn it into a melodeon with a small unisoronic (stradella) bass system?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Exploring and repairing a Russian Garmoshka
« Reply #9 on: August 21, 2022, 03:07:49 PM »

It’d won’t be beeswax,  it would be quite hard at room temperature. Proper accordion wax is actually somewhat softer than beeswax.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Exploring and repairing a Russian Garmoshka
« Reply #10 on: August 21, 2022, 03:12:23 PM »

It’d won’t be beeswax,  it would be quite hard at room temperature. Proper accordion wax is actually somewhat softer than beeswax.

Showing my ignorance again, sorry. I always assumed beeswax was softer. Rule 1: Check your facts before sticking your neck out.
Still sounds like the wrong stuff, though.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #11 on: August 21, 2022, 03:23:39 PM »

Are you at all tempted to turn it into a melodeon with a small unisoronic (stradella) bass system?


Not really, the bass isn’t laid out anything like a 24 button stradella, it’s a tonic sol fa bass melody row with a few chords and other bass notes to suit the diatonic key thrown in by the look of it. The waxing is much better in the bass end but loads of the valves are shot. Pics later.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Exploring and repairing a Russian Garmoshka
« Reply #12 on: August 21, 2022, 04:01:15 PM »

Well, there's certainly plenty of airflow space on the reedblock soles! This is all very interesting Pete, thanks for posting about it.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Exploring and repairing a Russian Garmoshka
« Reply #13 on: August 22, 2022, 07:21:42 AM »

I recently worked on a PA that was made entirely from plastic. The reed blocks moulded plastic, very similar to yours, sitting on a rubber gasket (though they were held there with bolts). It was an GDR made thing. The bass machine mech was all plastic, as was the casing.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #14 on: August 22, 2022, 03:24:51 PM »

A couple of months ago I replaced the bellows gaskets on a 120 bass five row five voice (LMMMH) Ukrainian Bayan. That had plastic reed blocks bolted in on rubber gaskets but the casework was celluloid covered wood and the bass mech was metal. The blocks in this one looked very similar to the garmoshka too, same light grey plastic with very thin walls.


Speaking of the garmon, here's another series of pics. I removed the treble grille to have a look at the pallets and the key mechanism/springs. The pallets are metal with a raised centre, a leather disc is glued to the pallet under the lever arm and then another leather disc is glued on top. This allows a slight movement so the pallet is self levelling, rather like concertina pads. The key mech is accessed by removing a plate at the back of the keyboard, the mech is entirely recessed and fastened into the keyboard itself with no access to the axle without dismantling the whole thing. There is a possible workaround but I wouldn't attempt it unless I had to, let's hope a spring never goes!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #15 on: August 22, 2022, 03:26:14 PM »

Next pic
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #16 on: August 22, 2022, 03:28:56 PM »

There is plenty of room around the buttons so perhaps the mech could be unscrewed from the keyboard and swung out to access the axle without taking the key tops off, might be awkward though!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #17 on: August 22, 2022, 03:30:08 PM »

Close up of the pallet attachment.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #18 on: August 22, 2022, 03:31:19 PM »

Bass reed block.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #19 on: August 22, 2022, 03:32:32 PM »

Bass octave reeds
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)
Pages: [1] 2 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal