Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Exploring and repairing a Russian Garmoshka  (Read 2513 times)

0 Members and 1 Guest are viewing this topic.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #20 on: August 22, 2022, 03:33:09 PM »

Bass reed block ports
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #21 on: August 22, 2022, 03:34:04 PM »

The other bass end block with chord notes etc.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #22 on: August 22, 2022, 03:35:20 PM »

Bass end with blocks out. We'll look at the bass mech another time.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #23 on: August 22, 2022, 03:39:08 PM »

Almost forgot, here are the charts showing the tuning of the two treble blocks, these were taken with the blocks out of the box. Incidentally I did do a comparison measurement of one block in the box and the results were virtually identical which surprised me.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #24 on: August 24, 2022, 12:05:51 AM »

Final pic for the time being, this is the bass mech and it's a real dog's breakfast. The arms behind the buttons are very thin and flexible and there is no overall framework guiding the arms or joining the various components within the mechanism together. Dismantling this to get at the pallets and reface them would be a nightmare.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Exploring and repairing a Russian Garmoshkant
« Reply #25 on: August 24, 2022, 08:32:40 AM »

The Bayan I worked on had a similar bass machine construction (but much bigger). The top half unclipped and came off (great!). The bottom half was more like yours (though it was a Stradella converter system so a bit more complex). No problem, thinks I, I’ve stripped lots of bass machines. But… the pipe connectors were like yours, wire with the ends bent over… in other words they are a one time assembly, not designed to be pulled apart. But I needed to get everything out to get at the metal palettes, to replace the pads, where the foam sandwich had disintegrated.
The problem I encountered is getting the bent wire connectors off (I used a small brass tube as a sort of wrench). The slightest kink in the wire and it won't slide off the locating hole…plus they are brittle and will break if you bend them more than a couple of times (eek). I got about a third of the way across and decided it was too risky (there were a *lot* more connectors than yours…and this was a clients instrument). So I stopped and reassembled. But getting the wire to bend back in exactly the same spot was very tough…and the slightest deviation then threw out the alignment. I still have nightmares about it. Eventually, after much work I got the whole thing back together and working. I then replaced the pallet facings with tweeezers and by going in from the reed block side. I learned a lot during that particular job… Bayan bass machines can be tricky to take apart.
« Last Edit: August 24, 2022, 08:34:59 AM by RogerT »
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #26 on: August 24, 2022, 09:07:12 AM »

Fortunately the pallets all seal well enough although they are a bit clacky, had they have been shot I would now be dismantling the box for parts!


I had intended to pre-tune the treble reeds before stripping them off the blocks to re-valve and wax back in but the poor adhesion makes that more or less impossible. None of the reeds are marked to indicate the ‘outside’ of the plate, given that they are unisoric is that an issue? Should I mark the plates as I take them off? I only ask because it is normal to see plates marked in this way and I see no reason why this would be done as a matter of course if it has no purpose.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Exploring and repairing a Russian Garmoshka
« Reply #27 on: August 24, 2022, 09:23:44 AM »

Unisonoric reeds need to be kept the same way up unless you can tolerate less than perfect tuning.  Turning the plate over can cause small changes of pitch.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Exploring and repairing a Russian Garmoshka
« Reply #28 on: August 24, 2022, 10:04:10 AM »

If you forget to label them, the little residue of wax at the foot of the reed denotes the outside. Even after they are cleaned there is normally a little stain.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #29 on: August 24, 2022, 10:14:14 AM »

Thanks Theo and Roger, I have a nice sharp engineer’s scribe so I can mark them with a diagonal slash in the Italian style although a dot from a centre punch would probably be quicker. I thought about dotting them with a black marker but I’m probably going to use a fairly strong solvent to get every scrap of the old wax off the plates and that would remove spirit ink no problem! I can’t use solvent like that on the plastic blocks though so maybe I will clean those up first and find a method that is effective without resorting to acetone or cellulose thinners. WD40 is probably the way to go as it is very effective at removing sticky stuff and doesn’t attack plastics.

I’ve read plenty of discussions about reed plate cleaning in sonic cleaning baths in the past but opinions always seem divided and the consensus inconclusive. I wonder how many pro repairers have them and use them regularly?
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Exploring and repairing a Russian Garmoshka
« Reply #30 on: August 24, 2022, 11:25:38 AM »

I have an ultrasonic cleaning bath that I have tried for cleaning reeds.  I don’t use it anymore for several reasons.
1 you still have to scrape and brush by hand to remove most of the attached residue and rust.

2 when the reeds come out of the bath they have to be dried immediately to prevent a flash coating if rust on the reeds that can form within a very short time

3 it’s quite time consuming loading the bath with hot water and keeping it it hot enough to enable wax removal.

4 less seriously the bath can remove the blue coating from the reed surface.  Only cosmetic I know but it doesn’t seem right!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #31 on: August 24, 2022, 12:25:32 PM »

Thanks for refreshing my memory Theo. I couldn’t remember the details but I do remember thinking that it sounded like there was little to be gained and I didn’t like the idea of removing the bluing from nice reeds either.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Exploring and repairing a Russian Garmoshka
« Reply #32 on: August 24, 2022, 02:08:35 PM »

I entirely echo Theo’s account. I now use the bath only to clean my glasses…or metal watch straps…
I use a Garryflex block (or similar) to clean reeds (it’s like an abrasive rubber/eraser) and a wire brush for the rivet end, and a small screw driver for scraping.
« Last Edit: August 24, 2022, 02:12:28 PM by RogerT »
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #33 on: August 25, 2022, 02:43:28 PM »

I have begun tuning the LH end starting with the row of low notes and it is really messing with my head. Unlike anything I’ve worked on before the order of the buttons on the outside bears no relation to the port that opens under the block, so button one at the chin end opens port seven (out of eight) at the knee end of the block. I had to take the block back out and make a chart mapping it out before I could get started. The chord block promises to be a right barrel of laughs. I’m beginning to dislike this box.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Exploring and repairing a Russian Garmoshka
« Reply #34 on: August 25, 2022, 05:06:48 PM »

A good tip in this situation is to lay a strip of masking tape along the reed block and write the note names on it
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #35 on: August 26, 2022, 09:47:57 AM »

I had a chart with the block layout Theo, my problem was that I didn’t know which button to press to make the notes sound in the box so I had to map that out before I could tune the notes in order. All done now though, moving on to the ‘chord’ block next.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Exploring and repairing a Russian Garmoshka
« Reply #36 on: August 26, 2022, 09:51:16 AM »

I would do it the other way round.  Start at the end of the row of buttons, sound the first button, your tuner will tell you the note, adjust if required, then move on to the next button and repeat.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #37 on: August 29, 2022, 09:07:33 AM »

I’ll have to put that down to my lack of experience and a broad streak of caution Theo. The bass end blocks are tuned and back in, I haven’t got my head around the button layout at all yet but I have sounded every button and there are no horrible noises coming out. I’ve now moved on to the treble end, stripped the reeds off both blocks cleaned the wax off the plates (horrible sticky mess). The blocks (plastic of course) were soaked in warm water and a strong solution of a well known washing up liquid, a light scrubbing with an old toothbrush and they are gleaming. I’ve no idea what a wooden block weighs (I’ll check next time I have one cleaned up for rewaxing) but these weighed 50 & 51 grams, pretty light. Work continues, photos to follow.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #38 on: August 29, 2022, 04:30:13 PM »

Photos of the treble end reed work.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Exploring and repairing a Russian Garmoshka
« Reply #39 on: August 29, 2022, 04:32:12 PM »

Block after stripping and narrow gaps between reed plates.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal