Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Broken key rod  (Read 606 times)

0 Members and 1 Guest are viewing this topic.

melodona

  • Member
  • *
  • Offline Offline
  • Posts: 31
    • Melodona Accordions
Broken key rod
« on: September 08, 2022, 04:48:19 PM »

Hello,

How would you go about this one? Epoxy? Aluminium is hard to solder...

Thanks for any tips.

Good day!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Broken key rod
« Reply #1 on: September 08, 2022, 04:50:57 PM »

I do not think you can join the broken part with enough strength.   You should remove the axle rod, remove the broken key and lever and you might be able to find a way to make a new aluminium rod and fix it to the key
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Broken key rod
« Reply #2 on: September 08, 2022, 05:34:43 PM »

Hello,

How would you go about this one? Epoxy? Aluminium is hard to solder...


Screwfix sell aluminium rod.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Broken key rod
« Reply #3 on: September 08, 2022, 05:57:12 PM »

Getting the aluminium rod is the easy part.  Choosing the right repair strategy is not so easy.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

melodona

  • Member
  • *
  • Offline Offline
  • Posts: 31
    • Melodona Accordions
Re: Broken key rod
« Reply #4 on: September 08, 2022, 06:24:25 PM »

The other thing is it's a cassotto... got them two skates business going on. I was thinking that maybe by adding little "brace rods" on each side of it as solidifiers, I could cover more ground on it with epoxy...
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Broken key rod
« Reply #5 on: September 08, 2022, 06:57:02 PM »

If you want to try a repair like that than the strongest way to reinforce the join would be a tube that would slip over the rod.  If you can’t find a tube then a piece of sheet aluminium rolled into a tube would work well,  and might be easier to get into the correct position. You will need the epoxy as well of course
Another idea would be to use glass fibre or carbon fibre matting wrapped round the break and coated in resin.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

melodona

  • Member
  • *
  • Offline Offline
  • Posts: 31
    • Melodona Accordions
Re: Broken key rod
« Reply #6 on: September 09, 2022, 04:33:44 AM »

Thank you all for the responses.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Broken key rod
« Reply #7 on: September 09, 2022, 01:29:48 PM »

eBay can be a good source of parts e,g, Theo's idea of a tube, which I think is probably your best bet - you can buy all sorts of brass tubing and would be able to crimp it a bit, as well as glue it. But cassotto boxes can be a right royal PITA, so good luck.
See
https://www.ebay.co.uk/itm/Brass-tube-Thin-wall-for-model-making-craft-work-in-metric-size-diameters-/161737898544?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal