Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Real reeds for toy melodeon?  (Read 3419 times)

0 Members and 1 Guest are viewing this topic.

Hectorawol

  • Member
  • *
  • Offline Offline
  • Posts: 41
Real reeds for toy melodeon?
« on: November 03, 2009, 04:46:05 AM »

Hi all, I have had plenty of use out of my toy melodeon in C that I purchased off eBay.
Being cheap, I assume that the reeds are cheap materials and am wanting to replace them
with real melodeon reeds. How posible is it to get two scales (in C) and two basses from possibly a second hand
instrument? Whats's the best way to go about this. Trying to find an alternative to brand new reeds as in Australia,
one reed costs more than what I paid for the whole instrument. Would piano accordion reeds fit in?
Has anyone done this before?
Appreciate an advice!

Thank you
Hector
Logged

Clive Williams

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3936
    • Home Page
Re: Real reeds for toy melodeon?
« Reply #1 on: November 03, 2009, 11:24:21 AM »

I've sometimes wondered how easy it would be to fit harmonica reeds... I expect they would all be on one metal plate and would need to be cut up though. Anyone tried anything similar?

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Real reeds for toy melodeon?
« Reply #2 on: November 03, 2009, 11:44:35 AM »

I think that standard melodeon or accordion reeds would probably fit.  I've never tried, because if you put better reeds in then yes it could sound a bit better, but its still going to be short of air, and suffer from creaky bellows and all the other limitations.

The best modification to these that I have tried is to blank off one set of reeds, that helps with the lack of air from the small bellows, and gets away from the not very in tune tremolo.  Best of all it only takes minutes to do and the biggest expense is a few inches of adhesive tape!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Real reeds for toy melodeon?
« Reply #3 on: November 03, 2009, 11:53:30 PM »

I think that standard melodeon or accordion reeds would probably fit.

They would, the reed plates are the same width, though the plastic reedblocks (that are in some of these boxes) might be problematic lengthwise (so better not to use Binci a mano?  ;))

Quote
... but its still going to be short of air, and suffer from creaky bellows and all the other limitations.

Bobby Gardiner came up with a good solution to that, by sticking two sets of bellows together on his.

nfldbox

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 492
Re: Real reeds for toy melodeon?
« Reply #4 on: November 04, 2009, 03:32:24 AM »

Michael Usui at irish dancemaster has done this a few times and i had my hands on one he did. It sounded amazing but the fellow wanted $175 for it. I have no idea how much it cost to put the reeds into the accordion.
Logged
BC Cairdin
BC Hohner Double Ray
Bouchard en Ré
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal