Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: replace bass blocks on a lili[put  (Read 1705 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: replace bass blocks on a lili[put
« Reply #20 on: October 08, 2022, 04:41:03 PM »

Have you thought of weighting the reeds you have, to drop them down by an octave? I expect that there's a good reason not to try this, but I think I've done this on some of mine with reasonable success.

Haha!  I recall you bringing me some reeds to tune.  Some had been weighted so much that I found them nigh on impossible to tune.  Reeds that are weighted to extreme can become slow to respond, produce less volume, and have pitch that varies excessively with changes in playing pressure.

Liliput is a great design, it has good balance between bass and treble.  Enjoy it for what it is.  If you want deeper basses get a full sized instrument.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: replace bass blocks on a lili[put
« Reply #21 on: October 08, 2022, 04:49:29 PM »

"Haha!  I recall you bringing me some reeds to tune.  Some had been weighted so much that I found them nigh on impossible to tune."

Well, there is that aspect I suppose! You can't win them all.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Marien Lina

  • Member
  • *
  • Offline Offline
  • Posts: 20
Re: replace bass blocks on a lili[put
« Reply #22 on: October 08, 2022, 09:45:31 PM »

Liliput is a great design, it has good balance between bass and treble.  Enjoy it for what it is.  If you want deeper basses get a full sized instrument.

I think I am going to stick to this balance, also because today I opened the box and concluded that I will have to replace the valves on the bass blocks. the old bass valves (the biggest 8) are open when not pushing or pulling - causing air leakage on push and pull, explaining the quite "silent" bass notes on this particular instrument. After replacing reeds with new valves I think the balance will be back again...
Logged

Marien Lina

  • Member
  • *
  • Offline Offline
  • Posts: 20
Re: replace bass blocks on a lili[put
« Reply #23 on: October 09, 2022, 02:59:05 PM »

Out of curiosity, are Pokerwork bass reeds -all- one octave lower than on a Lilliput, or is it rather that the overall range of bass notes extends a bit further down, say a fourth or a fifth, which means about half the notes would be lower but the others would be the same.  Just wondering...

Good question, I have checked this on CF pokerwork and the CF liliput.
I noticed that 3 of the 16 lowest bass reeds produce a higher note on the Liliput. Most of them (12) have exactly the same notes, not deeper on a pokerworktuning. One chord is different (on push: Bb chord on a 2 row is a Eb chord on a Liliput). Maybe worth another discussion, what is the advantage of having a Eb than a Bb on push on a CF   
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal