Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Reeds behaving badly  (Read 1998 times)

0 Members and 1 Guest are viewing this topic.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Reeds behaving badly
« on: October 17, 2022, 07:02:27 PM »

I have a (disgusting looking) HA113 in A and having cleaned, revalved and refitted all the reeds I'm not happy with the L reeds.
Tuning at a medium volume they sound fine but with a little more pressure they buzz more and the pitch rises.
Is it possible the heavily weighted blades are bottoming out or hitting the opposing reed? I don't remember this being a problem on my 4 stop in G.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reeds behaving badly
« Reply #1 on: October 17, 2022, 07:12:13 PM »

It does sound like reed tips making contact.  I’ve seen this before on 114G lowest reeds.  Sometimes the lowest L reed is an octave higher, so same pitch as the M reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reeds behaving badly
« Reply #2 on: October 17, 2022, 07:34:41 PM »

Is it a sudden jump in pitch? Accompanied by a rattling or buzzing sound? That’s usually what happens when a reed tongue is making contact with something it shouldn’t. Often, I have found that reeds (usually L reeds) close to the edge of the bellows may catch that excess bit of cardboard where the bellows are glued to the frame. This part can safely be trimmed away in the offending spot (but not the actual bellows folds!).
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reeds behaving badly
« Reply #3 on: October 17, 2022, 07:39:15 PM »

Here’s an example of what I’m talking about. Usually only an issue on the very lowest L reeds (on the rare occasion it is an issue at all).
Logged
C#/D player

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reeds behaving badly
« Reply #4 on: October 17, 2022, 08:34:05 PM »

"the lowest L reed is an octave higher,"

That's been the case with all the "G" multi voiced Hohner 1 rows which I've had, and have. But, seeing as I think it sounds queer, I've taken them all down an octave to keep the sequence which sounds right to my ears. I've not had this problem which you're experiencing, Pete, even with quite heavilly weighted tongues. I doubt that, in this instrument, the reed is contacting anything because of its amplitude.

But, are the bellows the original ones? Mmmmm!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Reeds behaving badly
« Reply #5 on: October 17, 2022, 08:36:19 PM »

Yes it's a noticeable increase in pitch. They are reeds facing the M row so not affected by bellows.
They appear to be the original reeds as there is no evidence of serious retuning and the parts are stamped A so presumably this fault must have always been there.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reeds behaving badly
« Reply #6 on: October 17, 2022, 08:40:52 PM »

Have you tried the offending reeds out of the instrument, on a separate block and bellows?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Reeds behaving badly
« Reply #7 on: October 17, 2022, 09:05:17 PM »

Have you tried the offending reeds out of the instrument, on a separate block and bellows?
No.
I pretuned them in a little adjustable frame I made. I was quite proud of my neat waxing and don't want to demount anything if possible.
Two, possibly three plates are affected and they are considerably higher pitched than the lowest weighted L reeds on a G box.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reeds behaving badly
« Reply #8 on: October 17, 2022, 09:06:54 PM »

Sorry, I was thinking of an HA114, where the L bank is facing outwards towards the bellows.
Logged
C#/D player

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Reeds behaving badly
« Reply #9 on: October 17, 2022, 09:25:32 PM »

No worries Matt. I can quite accept that it is fouling either the opposing plate or the spine of the block, I will check exactly which notes are doing what in the morning. What I can't understand is why it is happening now to the original bits in the original positions that have only been cleaned. Maybe it was a problem before? It came with dried out cracked wax, so rattles wouldn't have been apparent.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Reeds behaving badly
« Reply #10 on: October 18, 2022, 09:40:52 AM »

It's the first 3 reeds and only on the pull.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reeds behaving badly
« Reply #11 on: October 18, 2022, 10:13:37 AM »

Pull reeds are closer to the mid line of the block so anther pointer towards reed tip making contact.
Does it still happen when all three banks of reeds are in play? 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Reeds behaving badly
« Reply #12 on: October 18, 2022, 10:42:39 AM »

I didn't notice it, I only heard it when I started tuning.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Reeds behaving badly
« Reply #13 on: October 18, 2022, 04:21:24 PM »

Yes it does foul with all reeds blazing, but it's got to be played pretty loud to hear the change in pitch.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Reeds behaving badly
« Reply #14 on: October 18, 2022, 06:39:50 PM »

If the problem is the inside reed hitting the bottom of the chamber, would it be possible to make the 3 problem chambers deeper by i) building up the sidewalls to raise the reedplate mounting surface and/or ii) maybe modify the bottom surface to hollow it locally at contact point ? 
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reeds behaving badly
« Reply #15 on: October 18, 2022, 07:45:27 PM »

It would be easier, in my opinion, to attach a shim to the back of the reed plate, it wouldn't take very much to cure it. Shaving a bit off the inside of the chamber, with fixed blocks, would be really difficult, even with Pete's obvious skills!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Reeds behaving badly
« Reply #16 on: October 18, 2022, 08:26:22 PM »

I'm thinking of drilling from behind the flat back of the reedblock as close as possible to the weight on the inner reed. This should give clearance as I probably only need 1 or 2 mm. The obvious problem is getting dust everywhere. I can then enlarge the holes and fit a new section of back to cover the clearance holes.
What puzzles me is why did Hohner not spot the problem before and fix it in the factory?
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Reeds behaving badly
« Reply #17 on: October 18, 2022, 09:07:02 PM »

Aaah, it's only a one sided block! That makes sense then, doesn't it?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Reeds behaving badly
« Reply #18 on: October 18, 2022, 11:07:38 PM »

iWith the larger tip-weighted Reed tongues, I have known the alignment in the slot to be 'finicky.'
The reed appears to move through freely enough when tested manually but can catch the slot edge with the vibration of playing pressure. However, this would give the characteristic metal edge to the sound and I guess you would be aware of this.
Loosening reed tongue rivets are another consideration.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Reeds behaving badly
« Reply #19 on: October 19, 2022, 12:03:06 AM »

iWith the larger tip-weighted Reed tongues, I have known the alignment in the slot to be 'finicky.'
The reed appears to move through freely enough when tested manually but can catch the slot edge with the vibration of playing pressure. However, this would give the characteristic metal edge to the sound and I guess you would be aware of this.
Loosening reed tongue rivets are another consideration.

Yes, this would be the place to start.  If you haven't already, remove the reedplate and check the alignment in the slot.  Sometimes all it takes is to lightly run your file down the edges (profile) of the reed tongue where it is weighted to remove any burrs that may extend beyond the edge (but aren't visible), and then tighten the rivet.  It does sound like the reed tip is catching the back of the block (or something), but always start with checking over the reed itself extensively.
Logged
C#/D player
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal