Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: High notes on Beltuna melodeons.  (Read 4547 times)

0 Members and 1 Guest are viewing this topic.

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
High notes on Beltuna melodeons.
« on: November 04, 2009, 01:51:16 AM »

I have a Sara II B/C which is very nice, but is a little bit 'thin' at the top end. Actually it really is quite quiet. The D/G was fine, but the Samuel III D/G/# was also pretty quiet. Is this apparent on other makes/model? I've owned and played plenty of 'boxes without this problem but these two in particular seem to be out of balance. I wonder what other Beltuna owners experiences are? Is there anything that can be done about it?
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

ganderbox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 734
  • Melodeons from Brittany, Italy, Germany* and Leeds
    • www.choughedtobits.co.uk
Re: High notes on Beltuna melodeons.
« Reply #1 on: November 05, 2009, 12:40:17 PM »

It isn't just Beltunas. My Castagnari Dony D/G has always been quiet at the top end, especially on the G row. Over the last year or so I've made an effort to actually play it up there a bit more, and it has helped a bit, but It's still very thin compared with the rest of the box.
It's going for a retune and general overhaul sometime in the next few weeks, and hopefully it can be sorted out.

In the meantime, I'll look forward to reading the rest of the replies on this one.
Logged
Pauline from Cornwall

*  including a customised Hohner Club from Cornwall (and very nice it is too!).

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: High notes on Beltuna melodeons.
« Reply #2 on: November 05, 2009, 03:50:21 PM »

I'm guessing this is all part of what Theo refered to recently as setting up for am average player (!)  The set of the higher reeds on some boxes seems to be used to restrict their speaking, as they use less air than those lower in pitch.  So we have two effects, they speak less easily, which will tend to make the response feel even when played with basses, and as typically they are not valved, they are not inclined to speak when the paired reed is played.  Several of my boxes (concertinas included) seem to suffer from over zealous use of this phenomenon.  Hard playing seems to make them more willing to play, but they are still "wrongly" set and will not play quietly anymore...

Those who tinker can now shoot me down in flames, just my observations and surmising.

Rob.
Logged

ganderbox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 734
  • Melodeons from Brittany, Italy, Germany* and Leeds
    • www.choughedtobits.co.uk
Re: High notes on Beltuna melodeons.
« Reply #3 on: November 05, 2009, 05:51:51 PM »

Another current thread about weak reeds is relevant to this one

http://forum.melodeon.net/index.php?topic=2873.0;topicseen

Part of the problem of the notes sounding thin may well be that one of them is not sounding. I know that's partly the case with mine.
Logged
Pauline from Cornwall

*  including a customised Hohner Club from Cornwall (and very nice it is too!).

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: High notes on Beltuna melodeons.
« Reply #4 on: November 05, 2009, 06:58:12 PM »

You do have to be careful to distinguish what the actual problem is.   Incorrect reed set can make the reeds slow to speak, but doesn't have that much effect on volume. 

Its always going to be the case that high reeds make less noise than lower ones,  just because they are smaller and can move less air. So any design features of the reedblocks and other structures that are less than optimum will have a more noticeable effect on the high reeds.

The Sara is a new model, so maybe the design needs some adjustment.  I've only played one Beltuna Sara and that was good right across the range.

Part of the problem of the notes sounding thin may well be that one of them is not sounding. I know that's partly the case with mine.

It's also possible that a little more tremolo on the high notes would be perceived as more volume.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Re: High notes on Beltuna melodeons.
« Reply #5 on: November 06, 2009, 02:11:42 AM »

You do have to be careful to distinguish what the actual problem is.   Incorrect reed set can make the reeds slow to speak,

It's also possible that a little more tremolo on the high notes would be perceived as more volume.


The reeds are not slow to speak - just quiet. The D/G was OK, and yes it had a bit more swing than does the B/C. I'm sure I read in another thread that 'thicker' reeds will sing a bit louder when pushed a bit harder. It is possible to coax a bit more volume out of them but one really has to squeeeze :|glug
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: High notes on Beltuna melodeons.
« Reply #6 on: November 06, 2009, 08:28:42 AM »

It sounds as if they are just not very good reeds.  :(
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: High notes on Beltuna melodeons.
« Reply #7 on: November 06, 2009, 09:55:59 AM »

See if the reed block chambers for the higher reeds have some sort of material in them to reduce the volume - in older Clubs its just a bit of putty and on the newer boxes its just a piece of wood or a specially cut chamber wall. You'll notice some also have holes poked through the wax around the plate to allow air to escape.

Having too much air pressure can cause reeds to do funny things, I don't know if it will do anything to help in your case. Reducing airflow/volume does seem counter-productive to making a louder reed but some times there might be other forces at work.

It's also possible that its a change in sound your experiencing as the higher reeds are further away from you - the design of melodeons means they sound balanced a few meters away even if the treble/bass sounds weaker/stronger to the player. Get your melodeon playing friends to have a go while you listen (you can be more subjective this way).  Its exactly the same way a violin might sound really loud or bright against you ear, but sound clear and vibrant to a listener in the audience.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: High notes on Beltuna melodeons.
« Reply #8 on: November 06, 2009, 10:11:17 AM »

Just re-read OP and realise that the problem is with a B/C.  The top end of a G row goes up a fifth higher than the top end of a C row so it could be the reedblock design is different.  Maybe some of the reed chamber stuffing described by LJC has not been used, because B/C is lower pitch than D/G, perhaps it should be.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: High notes on Beltuna melodeons.
« Reply #9 on: November 06, 2009, 02:51:23 PM »

That's interestimg, Theo.  I remember being told years ago that music hall performers would pack and flow the chambers of their concertinas to get best response and volume.  With the geometry of a melodeon, that would suggest hours of fun with packing material and scraper!  Anyone tried it?

Rob.
Logged

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: High notes on Beltuna melodeons.
« Reply #10 on: November 06, 2009, 05:30:28 PM »

The use of putty I've seen is pretty basic - it is literally just a lump which has been thumbed into the the chamber, complete with finger prints. It's placed at an angle so that the front of the air hole it is low, and by the opposite end of the block it is about 1cm high. It doesn't look as if there was any real scientific approach to applying it!

Just looking at the block of an 80s pokerwork which is out from being tuned, there are actually steps cut into the chamber so that a block of wood about 4mm high is underneath the blow reed.

If you want to try it out, take the reed plate off and then pour some molten reed wax into the cavity. Tip the block to one side and hold until the wax sets and you get a fairly even flat angle. Replace the reed and check tuning, and see if it makes any difference. If it doesn't work or causes problems its a simple enough maneuver to heat the wax and pour it out and scrape any leftover off.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: High notes on Beltuna melodeons.
« Reply #11 on: November 06, 2009, 06:23:32 PM »

Whatever material you use it's important that it has a smooth hard surface so it does not absorb sound.  Wood is probably the best choice  for a solid material,  a two part filler, as used for car body repair might work too though I've not tried it.  I believe that it's also I
portant to shape the path to the vent in the base of the block,  but I don't know what shape is best. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal