Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: fix leaking DIY accordion  (Read 2303 times)

0 Members and 1 Guest are viewing this topic.

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
fix leaking DIY accordion
« on: October 24, 2022, 05:48:15 PM »

Hi folks,

About a year ago I bought a second hand box, put together from (I think) a Hohner bass mechanism and a handbuilt casing and treble keyboard. On the pics it looked good; all wood! I went to check out the instrument and the sound was fabulous, however the instrument needed a lot of physical power to play. I thought I'd manage to find the cure and bought it.
since then I've changed the tuning to swing and I've been playing Irish music on it, however I couldn't play anything fast because the buttons had very deep action and heaving spring tension.
So I decreased key action by adding wooden stoppers, and bent the springs to reduce pressure.
But now the pallets are leaking air. They are not regular pallets, but metal ones, fixed not with wax but a rubber band.
I suppose that this type of pallets needs more spring pressure to close properly. Does anyone have experience with these pallets? I’m planning on replacing them or taking off the rubber and fixating them with wax. That way I hope that, while keeping light spring pressure, the pallets will close properly. Anyone’s guess as to this will solve the leakage problem?

By the way: the builder had the idea that bringing the pallets in direct contact with the reed blocks would decrease air leakage. This has the disadvantage that everytime I want to take out the reed blocks, I have to fixate the keyboard with a plank and clamp.



Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: fix leaking DIY accordion
« Reply #1 on: October 24, 2022, 08:51:36 PM »

Looking at the photos, it looks like the pallets are not much bigger than the holes in the reed blocks. So more area exposed to pressure, a much smaller area to seal and they need to land pretty accurately every time.
I wonder if you could make a thin flat strip or plate with a more conventional hole sizes to temporarily fit between the block and the pallets. Obviously you'd need a gasket on the block side, and some means of holding it firmly (maybe for proof of concept the other pallets would suffice). I would guess that the rubber bushes (which I personally doubt are the problem) will cope with any small misalignment.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: fix leaking DIY accordion
« Reply #2 on: October 24, 2022, 09:11:08 PM »

1. It is possible you have reduced the spring pressure too much and this is allowing air to escape.

2. Those rubber attachments have a some flexibility to allow for slight misalignment of the lever, but it's not very much and it can still be the case that the pallet is not completely parallel to the surface it is resting on.  A quick way to check is to press gently on the centre of the rubber joint while looking carefully at the pallet.  It should move down slightly as the felt compresses.  if one edge moves down more than the opposite one then the pallet need to be adjusted to lie flat.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: fix leaking DIY accordion
« Reply #3 on: October 26, 2022, 01:05:00 PM »

hi folks,

thanks for the suggestions. I'll keep you posted once I've managed to make the instrument airtight.
Logged

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: fix leaking DIY accordion
« Reply #4 on: November 01, 2022, 07:44:16 PM »

I brought back some pressure to the springs with the least tension, and that helped a bit, but still air is audibly escaping.
I'm still wondering if replacing the pallets with wooden ones would be the way to go.
are the metal ones with rubber bands considered inferior or equal to regular, wax-fitted pallets?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: fix leaking DIY accordion
« Reply #5 on: November 01, 2022, 11:31:34 PM »

I have a Pariselle box with exactly the same pallets and it’s airtight.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: fix leaking DIY accordion
« Reply #6 on: November 04, 2022, 10:13:26 PM »

Hmmm Theo, that's not good news. I did the testing you proposed (gently pressing down the pallets), and I was able to reposition some of the pallets (they have room to slide of a few mm), and I think spring tension is not extremely low.
It is however evident that the air is leaking from between pallets and reed blocks; when I taped the reed blocks the accordion was nearly airtight.
I may have to try the other suggestion; inserting a board with smaller holes, and in the process turning the instrument into a 'normal' box instead of having the pallets in direct contact with the reed blocks.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: fix leaking DIY accordion
« Reply #7 on: November 04, 2022, 11:52:06 PM »

I'm not sure I understand the logic of this design.  The way I see it, air can leak from the pallets (as on a standard box) but also from the block-box joint at the perimeter of the opening.  Am I missing something ??
Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: fix leaking DIY accordion
« Reply #8 on: November 05, 2022, 03:08:39 AM »

Are the pallet facings felt + leather, or just felt?  (They need the leather)
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: fix leaking DIY accordion
« Reply #9 on: November 05, 2022, 11:24:01 AM »

tirpous: you're right. The maker thought he would eliminate any air leakage between reed blocks and mounting plate, but the reed blocks have to be fixed airtight somehow anyway. He solved that by putting bellows tape around the blocks

gonk: there's leather on the pallets.

So I was planning on making a mounting plate for the reed blocks, but it would be best (if not the only way) to drill the holes together with the gasket. But what material is used for that? is it felt?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: fix leaking DIY accordion
« Reply #10 on: November 05, 2022, 12:31:19 PM »

He solved that by putting bellows tape around the blocks


That bellows tape might be the source of the problem.  It's not got the resilience needed for a gasket so it can't accommodate the small surface irregularities of the mating surfaces.  If it really is bellows tape it should be replaced with a gasket material.  Can you post a photo of the tape?  Correct gasket material is cheap.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: fix leaking DIY accordion
« Reply #11 on: November 05, 2022, 03:50:54 PM »

Hi Theo,

I was a bit impatient so I made  a 'sound board' or 'mounting plate' for the reed blocks today.
I was quite pleased with myself because it worked and I got all the holes in the right places.
For gasket I used felt, glued to the plywood. I drilled the holes while clamping the board firmly to a plank with the felt in between so it wouldn't get caught in the drill.
However, although leakage is far less now, I've got two new problems.

The sound board is 2 or 3 mm closer to the pallets than before, because I removed the gasket on which the reed blocks were mounted, so I could glue the sound board in place. This works OK for the pallets on the long levers (the outer row on the keyboard) but now the angle of the pallets on the short levers is wrong, and they don't close. So I may have to replace the pallets on them after all, since bending the flat aluminum of the levers doesn't seem an option.

The other problem is that the higher notes speak poorly now. I suppose I made an thinking error by taking the middle of the holes on the reed blocks, and using that to drill the smaller holes in the sound board.
I will try to remedy this by enlarging the holes on the reed side of the reed chambers so the air can reach the reeds without having to pass an obstacle.

It's a steep learning curve! Should I ever want to build my own box, this experience will surely come in handy by that time..

Logged

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: fix leaking DIY accordion
« Reply #12 on: November 10, 2022, 07:06:04 PM »

Looking at the photos, it looks like the pallets are not much bigger than the holes in the reed blocks. So more area exposed to pressure, a much smaller area to seal and they need to land pretty accurately every time.
I wonder if you could make a thin flat strip or plate with a more conventional hole sizes to temporarily fit between the block and the pallets. Obviously you'd need a gasket on the block side, and some means of holding it firmly (maybe for proof of concept the other pallets would suffice). I would guess that the rubber bushes (which I personally doubt are the problem) will cope with any small misalignment.
Hi Malcolm, your post convinced me to make a permanent reed plate with smaller holes. It fixed the air leaking.
Meanwhile I've enlarged the holes on the treble side and put new pallets on the inner row levers.
For the first time this instrument is playing like a normal box!
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: fix leaking DIY accordion
« Reply #13 on: November 14, 2022, 02:09:39 AM »

I am glad you got this straightened out, I was waiting for it to turn into a version of "theres a hole in the bucket".
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: fix leaking DIY accordion
« Reply #14 on: November 15, 2022, 03:54:44 PM »

I have these 'hole in my bucket' projects also.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal