Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?  (Read 1945 times)

0 Members and 1 Guest are viewing this topic.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711

So I got hold of a junker (not for long I hope!) 1040G and I’m starting to poke the reeds about a bit. I decided rather than close off the M+ reeds and tune M reeds first, I would just basically ‘walk’ the reeds to their correct pitch as a pair. That is for example, if the reed pair made too high a pitch but the tremolo was also to high, I would first just tune down the M+ reed, and see where that got me, before making further adjustments until the tremolo and pitch were both about correct. It struck me that this is basically leading to ‘Dedic’ tuning since I am reading the resultant pitch of two reeds…

I’ve so far roughly done this with the push notes (low hanging fruit!) and am quite happy with the results. It seems that since there are no reedblocks to remove on this instrument this is the simplest way to get it in tune. Has anyone else used this method or have any thoughts to the contrary?..
« Last Edit: October 27, 2022, 04:35:29 PM by Arnold »
Logged
Dancing about architecture since 1997

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #1 on: October 28, 2022, 11:05:17 PM »

So I got hold of a junker (not for long I hope!) 1040G and I’m starting to poke the reeds about a bit. I decided rather than close off the M+ reeds and tune M reeds first, I would just basically ‘walk’ the reeds to their correct pitch as a pair.
[...]
I’ve so far roughly done this with the push notes (low hanging fruit!) and am quite happy with the results.

Knowing your recent posting history on this box, I hope you have checked and fixed any other problems with the reeds first. If they need new valves or rewaxing you should do this before tuning, or you'll be doing more tuning afterwards!

Disclaimer: I speak from zero practical experience, only from what's been posted several times on this forum by others who certainly do know what they are doing.
And maybe your reeds are all fine, and a bit of tuning is all they need.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #2 on: November 15, 2022, 09:21:18 AM »

You are of course correct. The wax is brittle and it seems every time I move the box a different reed comes loose… I was hoping I’d have it ready for Christmas concert (G is such a Christmassy key!), but I don’t think that’s very likely. It does look nice now though (in an old worn out kind of way), I got most of the rust off, replaced the grill cloth, fitted a new thumb strap, limited the keyboard action… I find the prospect of rewaxing/tuning just too daunting though… I’m thinking of maybe donating it to work, and then maybe they’ll have it tuned some day so it can get some use…
« Last Edit: November 15, 2022, 09:37:11 AM by Arnold »
Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #3 on: November 15, 2022, 10:37:18 AM »

You are of course correct. The wax is brittle and it seems every time I move the box a different reed comes loose…

That confirms that you need to do a full re-wax before it's worth putting any effort into tuning.  if any of the rust you have removed is from the reeds, then you will also need  to de-rust the pull reeds which is best done while the reeds are dismounted.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #4 on: November 15, 2022, 11:24:06 AM »

Yes, I have left the rust on the push reeds for reasons of consistency with the pull reeds. The valves are all good. Unconventional as it may be, I may attempt to re wax the reeds before fine tuning in situ…
Logged
Dancing about architecture since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #5 on: November 15, 2022, 12:39:03 PM »

Arnold, if you're going to do anything with it, please take notice of the advice you're being given. The reeds have to come off in order to clean off all the old wax before re-waxing. Then, it would be silly to not clean off the rust from the underside reeds, half a job on melodeons just doesn't work. Believe me; I've tried it many times!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #6 on: November 15, 2022, 01:26:04 PM »

All good advice thanks. Either way I would really like to have the box ready for the concert in 3 weeks (I’m support staff in education), and I don’t think I’ll be able to get the work done on time. Therefore if anyone would be able to do the work with a quick turnaround, could they PM me with a quote?.. cheers!
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #7 on: November 15, 2022, 03:30:50 PM »

When I say ‘quick turnaround’, I mean a couple of weeks. I can learn the tunes on another box in the wrong key first…
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #8 on: November 16, 2022, 07:30:58 AM »

Ok, I don’t think I’m able to afford a professional tuning (need to put out that burning hole in my wallet!)  but if there are any fledgling fettlers out there looking for some experience with flat mounted reeds (haha) I can offer £50 for your troubles!..
Logged
Dancing about architecture since 1997

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #9 on: November 16, 2022, 10:34:44 AM »

When I say ‘quick turnaround’, I mean a couple of weeks. I can learn the tunes on another box in the wrong key first…

Whereabouts are you based? Another possibility might be to see if anyone near you might be prepared to lend you a box?
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #10 on: November 16, 2022, 10:35:54 AM »

I expect that there are people on here who would be happy to make your instrument playable in reasonable tune, and without any sort of payment.
I wouldn't expect anyone to do a complete reed overhaul, mind.
One thing, though; we've no idea of whereabouts you are!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #11 on: November 16, 2022, 11:22:15 AM »

Perhaps, yes. I am in East Kent. I think basically the reed plates need rewaxing and the reeds need tuning (to within 5 cents would probably do because I could fine tune at a later date once the reedplates are in place) ... The valves look fine and responsiveness is fine. So I guess that’s not a full overhaul?..
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #12 on: November 16, 2022, 05:34:01 PM »

Anyway, I would happily pay postage on top of whatever the cost too…
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #13 on: November 17, 2022, 01:53:23 PM »

It’s on the set list for the concert in 3 weeks (the 3rd part at least), but what would it be without the box… 🤔

https://m.youtube.com/watch?v=BVVDiKr876s
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #14 on: November 22, 2022, 07:12:49 PM »

Can’t really justify the cost of professional work due to the general state of the box. It’s highly unlikely to be fixed up in time for Christmas concert now, but I’ll give it a go!.. Decided it’s probably best to tape off + reeds, and first roughly tune the push reeds, before removing tape and tuning + reeds to taste (3-4hz?..). Then flipping reeds and repeating the process with the pull reeds… After that removing all reeds and cleaning off old wax. Finally rewax and fine tune?..
Logged
Dancing about architecture since 1997

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #15 on: November 22, 2022, 08:05:59 PM »

Can’t really justify the cost of professional work due to the general state of the box. It’s highly unlikely to be fixed up in time for Christmas concert now, but I’ll give it a go!.. Decided it’s probably best to tape off + reeds, and first roughly tune the push reeds, before removing tape and tuning + reeds to taste (3-4hz?..). Then flipping reeds and repeating the process with the pull reeds… After that removing all reeds and cleaning off old wax. Finally rewax and fine tune?..
If you flip the reeds and then tune the pull reeds in a push position and then unflip them you will need to retune them as the reeds sound differently if they are in a cavity or not.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #16 on: November 22, 2022, 08:08:51 PM »

I'd recommend one change to that - take all the reeds off first and clean them thoroughly, and replace any valves that are loose, bent, not lying flat or damaged in any other way.  Then put the reeds back in place and tune.  if you need to flip them to tune the pull reeds then just tack the reeds in place with a bit of wax at each end.  You should fine the reeds easier to tune if they are clean and have good valves.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #17 on: November 22, 2022, 08:48:15 PM »

Good advice, thanks. With regards to tuning inside vs outside the chamber I was thinking I would note the difference in pitch when flipping from inside to outside position and factoring that in?..

Steel wool to clean the reeds, and lightly filing along the sides of the reeds in case of any rust/metal sticking out and contacting the reed slot?.. Hopefully the valves will hold. They look good and are flat… The response of the reeds is very good, instant (‘T’ reeds with a dot)
Logged
Dancing about architecture since 1997

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #18 on: November 23, 2022, 12:31:16 AM »

Avoid steel wool, some of it will get stuck under the reed tongue.  I like to remove most of the wax/rust/dirt with an old utility knife blade, but it's just me.  If you search the forum for keywords like 'clean reed' you should find more information and suggestions as this topic comes up regularly.
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: ‘Dedic’ tuning - the natural way to tune a Hohner 1040?
« Reply #19 on: November 23, 2022, 06:15:14 AM »

Good point, not sure where I got the steel wool idea from, probably Google.. Yes, I think scraping the rust would be better…
Logged
Dancing about architecture since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal