Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Wanted: Paolo Soprani White Buttons  (Read 1543 times)

0 Members and 1 Guest are viewing this topic.

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Wanted: Paolo Soprani White Buttons
« on: November 01, 2022, 03:29:30 AM »

I've searched high and low and I'm unable to find a supplier of the white rounded buttons used on vintage paolos. Would anyone happen to have some they could sell or know of a supplier? I have several stepped keyboards I'm flattening so require many buttons. Thanks.
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wanted: Paolo Soprani White Buttons
« Reply #1 on: November 01, 2022, 07:46:01 AM »

None of the ones from Charlie Marshall suitable?  You might have to go with white pearl instead of plain white.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Wanted: Paolo Soprani White Buttons
« Reply #2 on: November 01, 2022, 12:45:51 PM »

I've spent 15 years looking for newly produced suitable buttons, to no avail. I've stripped a couple of other 50's wrecks or cheaply made boxes with nice buttons, if they were cheap enough, and 'bad' enough to play to justify taking the buttons.
Logged

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Wanted: Paolo Soprani White Buttons
« Reply #3 on: November 01, 2022, 01:06:18 PM »

I've spent 15 years looking for newly produced suitable buttons, to no avail. I've stripped a couple of other 50's wrecks or cheaply made boxes with nice buttons, if they were cheap enough, and 'bad' enough to play to justify taking the buttons.

This.

You don't even have to give up on the cheaper box, you could install new pearloid buttons into it, but still achieve the goal of obtaining the right stuff when restoring (or modding) a very high value vintage instrument. The value of much cheaper boxes isn't really compromised by swapping modern buttons into them.

I wish though that whoever makes the buttons could be convinced to reissue the old type (white/ivory celluloid) found on the classic Paolos. Guitar parts manufacturers and even vintage electric keyboard restorers (such as Vintage Vibe in New Jersey) have increasingly made the effort to supply more appropriate replacement parts for old instruments. I'm sure it could be worthwhile if those who want those buttons would be willing to pay a bit more for them.

PG
« Last Edit: November 01, 2022, 01:11:43 PM by pgroff »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wanted: Paolo Soprani White Buttons
« Reply #4 on: November 01, 2022, 01:56:17 PM »

I can ask Carini about this if someone can send me dimensions
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Wanted: Paolo Soprani White Buttons
« Reply #5 on: November 01, 2022, 04:22:58 PM »

I can ask Carini about this if someone can send me dimensions

The dimensions I'd be looking for are 13.8mm diameter x 7.5mm deep. this would be for the mid-50s boxes onwards. The earlier paolos I don't have a dimension for. I reached out to Carini previously and they said they don't have plain white/ivory buttons for treble but only the bass piston type.

If the button factory requires a minimum order to do a one-off production run I'm sure we can find enough people to commit. I will gladly purchase 200 buttons and I'm sure many of the repairers of Irish boxes would be glad to have some of these in stock for vintage refurbs. It would be nice to know where Carini gets the buttons from.

Thanks all for the input!
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Wanted: Paolo Soprani White Buttons
« Reply #6 on: November 01, 2022, 04:29:53 PM »

Also, there is a supplier in Brazil called Casa Da Gaita Ponto that I've ordered buttons from thinking they would be the correct type but they are too white :) The shape and everything else is perfect but I would need to stain them Ivory in some permanent way. Here is the link for anyone that's interested:

https://casadagaitaponto.com.br/produto/botao-de-mao-direita-14mm-branco-p-hering-beija-flor-cod-361/
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Wanted: Paolo Soprani White Buttons
« Reply #7 on: November 01, 2022, 04:36:18 PM »

I can ask Carini about this if someone can send me dimensions

The trick is that multiple different sizes of buttons were used in the classic Paolos (that have the most value and for which there would be a market for nice vintage-color ones).  But I can get you dimensions for several useful sizes.

PG
Logged

fiachramp

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Wanted: Paolo Soprani White Buttons
« Reply #8 on: November 01, 2022, 08:27:20 PM »

I've also searches for these. Wanted them for a 21 button  that was converted to a flat keyboard. The pearl buttons just don't look the same on the old Paolo's. The only modern maker I've come across who uses something similar looking to the old buttons is Doug Briggs. I think I remember reading on his site that he makes them himself out of mock ivory.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wanted: Paolo Soprani White Buttons
« Reply #9 on: November 03, 2022, 08:01:37 PM »

Another method would be to find a suitable material and have them turned on a lathe.  I have a friend who might be interested if the buyer could identify the right material, preferably a round bar.

something like this: https://www.ebay.co.uk/itm/401246260891

select Material - acetal
colour - natural or white

« Last Edit: November 03, 2022, 08:17:54 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Wanted: Paolo Soprani White Buttons
« Reply #10 on: November 03, 2022, 10:12:01 PM »

Another method would be to find a suitable material and have them turned on a lathe.  I have a friend who might be interested if the buyer could identify the right material, preferably a round bar.

something like this: https://www.ebay.co.uk/itm/401246260891

select Material - acetal
colour - natural or white

Hi Theo, I tried to do that very same thing a while back. I bought both the acetal and nylon rods and lathed buttons out of them. Those materials don't have the correct look. There's a slight transparency to them that doesn't look right. I think the correct material would be plain cream/ivory celluloid. I wasn't able to source that material anywhere unfortunately since it seems like the itallian celluloid factories closed down and outsourced their manufacturing to China. Colours then became restricted to what you can find on AliExpress etc.
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

Grumpy

  • Grumpy
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
Re: Wanted: Paolo Soprani White Buttons
« Reply #11 on: November 04, 2022, 05:22:41 PM »

I suspect your original keys are made from a material called Casimite, an early form of plastic derived from milk. Around the turn of the 18-19 hundreds this was used among other things to form concertina buttons. I have an "English" Lachenal from this time with Casimite buttons, these have taken on a yellow colour oven the years which seems to have penertrated throughout the material making cleaning impossible. When time allows I intend to either cast new buttons from Casimite wood glue powder (available on Ebay). I have NOT tried this yet and I am assuming that from its discription, when cured is the same material. It would be a simple task to either make a mould (silicon rubber ??) or to cast a rod in plastic tube and turn and round each button on the lathe. If you try this with or without sucess please post result. Regards Chris D
Logged
Chris D, Surrey, UK
Getting old but still learning. Pokerwork G/D, Saltarelle L'Elfique G/D, Castagnari Lilly G/D and Hohner Liliput Declubed G/D + English concertinas, mandolins, recorders, tin whistles and other items unknown to household managment

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wanted: Paolo Soprani White Buttons
« Reply #12 on: November 04, 2022, 06:22:50 PM »

Grumpy,  I think you are thinking of casein, an early plastic like substance derived from milk protein.  I think by the 1950s when the classic Paolo Soprani era started the material would have been superseded by a more modern polymer. Casein was used extensively by Hohner for buttons in the 1930s and they are subject to a very characteristic denaturing of the surface which makes the colour a dull brown, and in extreme cases the surface shows a network of cracks.  I’ve never seen this on Paolo  Soprani buttons.
Cascamite was a urea formaldehyde wood glue supplied as a powder to mix with water. I dont think it included casein.
« Last Edit: November 04, 2022, 06:26:08 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Grumpy

  • Grumpy
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
Re: Wanted: Paolo Soprani White Buttons
« Reply #13 on: November 04, 2022, 08:08:50 PM »

Hi, thanks Theo, I think you may well be correct. I was using names and terms given me quite some time back on a concertina site whilst I was trying to clean my buttons. Many thanks for corrections, Regards Chris D
Logged
Chris D, Surrey, UK
Getting old but still learning. Pokerwork G/D, Saltarelle L'Elfique G/D, Castagnari Lilly G/D and Hohner Liliput Declubed G/D + English concertinas, mandolins, recorders, tin whistles and other items unknown to household managment

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Wanted: Paolo Soprani White Buttons
« Reply #14 on: November 05, 2022, 05:11:13 AM »

I suspect your original keys are made from a material called Casimite, an early form of plastic derived from milk. Around the turn of the 18-19 hundreds this was used among other things to form concertina buttons. I have an "English" Lachenal from this time with Casimite buttons, these have taken on a yellow colour oven the years which seems to have penertrated throughout the material making cleaning impossible. When time allows I intend to either cast new buttons from Casimite wood glue powder (available on Ebay). I have NOT tried this yet and I am assuming that from its discription, when cured is the same material. It would be a simple task to either make a mould (silicon rubber ??) or to cast a rod in plastic tube and turn and round each button on the lathe. If you try this with or without sucess please post result. Regards Chris D

Thanks Grumpy for the casting suggestion. I went out today and purchased a silicone molding kit and will be pouring it around a batch of white pearl buttons I bought a while a go - they have a nice shape that match close enough to a 50s paolo. I did a bit of research on casting materials and I think i'll go with Polypropylene resin with white pigment and a touch of ivory pigment to give it the off-white cream colour. The polypropylene cures as hard as glass and holds a very good polish I'm led to believe. Will follow up with my results! Thanks all for the input. This thread might need to be moved to the instrument design/construction/repair section since we're veering away from a purchase at this stage I think.
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Wanted: Paolo Soprani White Buttons
« Reply #15 on: November 07, 2022, 01:42:22 PM »

Keep us posted, Chris. Even though I've long stopped converting Paolos, it's an interesting project:-)
Logged

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Wanted: Paolo Soprani White Buttons
« Reply #16 on: November 07, 2022, 04:43:30 PM »

Keep us posted, Chris. Even though I've long stopped converting Paolos, it's an interesting project:-)

Will do. Well my first attempt ended in a sticky mess of un-cured molding rubber. I think it was a bad batch. I'll have to try again!
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Wanted: Paolo Soprani White Buttons
« Reply #17 on: December 12, 2022, 11:59:39 PM »

I found this on Carini's site:

https://carinidena.it/MS5ECOMMERCE60/jsp/eco_cc_home_bs_portlet.jsp?p=dettarti&codarti=14551236

There's no picture, but the product details show the button dimensions as well as describing the colour as "Pastel White", which is in contrast to the product listing directly next to it (https://carinidena.it/MS5ECOMMERCE60/jsp/eco_cc_home_bs_portlet.jsp?p=dettarti&codarti=145511136) which is identical except for a colour description of "Pearl White".  This would suggest that they may have the same button available in 'pearl white' and a white that *isn't* 'pearl'.  An inquiry to Carini over email would confirm either way.
« Last Edit: December 13, 2022, 12:02:37 AM by mselic »
Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal