Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Wooden buttons  (Read 943 times)

0 Members and 1 Guest are viewing this topic.

jarviw

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 156
Wooden buttons
« on: November 01, 2022, 06:27:45 PM »

So I had the crazy idea of making my own wooden buttons... Hohner treble buttons are about half an inch in diameter, which I can get in both soft and hard woods dowels readily. And I think a small hole in the backside with some epoxy glue will hold them on the mechanism nicely. Obviously there will be a bit of sanding for the rounded profile as well as polishing, but surely it's doable?
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Wooden buttons
« Reply #1 on: November 01, 2022, 06:48:27 PM »

I've done it once before for a concertina that was being restored for sentimental value (it being a cheap instrument that did not have any real value otherwise).  I made them out of wooden dowels as you are suggesting.
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wooden buttons
« Reply #2 on: November 01, 2022, 06:49:29 PM »

I'm sure it is do-able, but end grain on the top of the button might not be comfortable.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Wooden buttons
« Reply #3 on: November 01, 2022, 07:53:14 PM »

I did this on a concertina. It was easy enough, but it wasn't 100% successful. I used soft wood dowel and they lasted about five minutes. The box had rubbish reeds. I threw it out in the end.

Why not just buy some Hohner buttons, or scrounge them out of a scrap box?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Trevor Henderson

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
  • Tender Buttons
Re: Wooden buttons
« Reply #4 on: November 01, 2022, 07:58:36 PM »

I made wooden buttons out of 7/16” hardwood dowel. I put them in a small drill press and used sand paper to shape and smooth the tops. They’ve held up for 15years of daily playing
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Wooden buttons
« Reply #5 on: November 01, 2022, 09:21:57 PM »

Plug cutters are available in various sizes if one wants to make buttons with side-grain.  And a closed-grain hardwood would probably work best, no matter which way the grain is running.
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Wooden buttons
« Reply #6 on: November 02, 2022, 08:51:45 AM »

Impractical, sure.  Fun, yes.
Lots of places sell scrap exotic wood cutoffs and Tirpous idea to use plug cutter would work nicely to get off-grain cuts.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

jarviw

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 156
Re: Wooden buttons
« Reply #7 on: November 02, 2022, 03:16:57 PM »

No, I don't actually *need* any buttons (yet). It was really just a crazy idea for the sake of entertainment.
and yes, I thought about using a plug cutter for cross grain cuts first, but thought a dowel would make the process easier: Round off the ends on a belt sander for the profile, then cut the buttons out on a band saw for consistent thickness. And a few coats of varnish with fine sanding in between will smooth anything out  ;D
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Wooden buttons
« Reply #8 on: November 02, 2022, 08:59:47 PM »

A lathe (table top versions are available if you don't have access to a half decent workshop) would be my tool of choice for the job.
« Last Edit: November 03, 2022, 12:00:07 AM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Wooden buttons
« Reply #9 on: November 02, 2022, 11:48:08 PM »

No, I don't actually *need* any buttons (yet). It was really just a crazy idea for the sake of entertainment.
and yes, I thought about using a plug cutter for cross grain cuts first, but thought a dowel would make the process easier: Round off the ends on a belt sander for the profile, then cut the buttons out on a band saw for consistent thickness. And a few coats of varnish with fine sanding in between will smooth anything out  ;D

If you use a bung cutter to cut them it would round the end for you.
You may need to adjust the round?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Wooden buttons
« Reply #10 on: November 13, 2022, 05:27:32 PM »

You can use a nice hardwood and then "paint" the button with the wood workers super thin superglue (about the viscosity of alcohol) it will soak in the wood and harden the surface. It takes a nice polish too. This would seal a endgrain nicely.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Wooden buttons
« Reply #11 on: November 14, 2022, 11:50:43 AM »

I'm sure it is do-able, but end grain on the top of the button might not be comfortable.

I agree - and they would be considerably more liable to split with the grain running along the length. Plug cutters would work provided you can find a size near enough to your required diameter, though it shouldn't be too difficult to find a friendly woodwork enthusiast who would turn you up a set. I'd offer, but I'm 2000 miles away from the UK........
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal