Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Quiet Box  (Read 2042 times)

0 Members and 1 Guest are viewing this topic.

Nic Pennsylvania

  • Lombardi A/D & B/E
  • Member
  • *
  • Offline Offline
  • Posts: 41
  • Northern Appalachia Accordion
Quiet Box
« on: November 04, 2022, 03:20:47 AM »

Hi all, I'm needing some advice/direction.

I recently starting putting work into this old box (felted the spoons, new valves, new foam gaskets, and I even made a couple buttons to place the missing ones) and while I'm not 100% done, I figured I'd start playing it a bit before some more tuning.

This issue is that this box is especially quiet. Hopefully the clacking will give suggestion to how quiet it is. That said, the bellows are tight, so it isn't for a lack of air.

Does anyone have any advice/direction on what the issue could be, or is this just one of those things with these earlier boxes?

https://www.youtube.com/watch?v=BbXPeIGBj8M&ab_channel=NicPennsylvania
Logged
Northern Appalachia Accordion

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Quiet Box
« Reply #1 on: November 04, 2022, 03:48:39 AM »

It’s just the nature of the beast.
Logged
C#/D player

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: Quiet Box
« Reply #2 on: November 04, 2022, 06:06:47 AM »

Hi Nic.

I used to own an instrument like yours. It sounded exactly the same.
Logged
Semper idem, sed non eodem modo

Mr Squeeze

  • Castignari Bennys - G/C & D/G/G# Lillys D/G, C/F, A/D
  • Member
  • *
  • Offline Offline
  • Posts: 26
Re: Quiet Box
« Reply #3 on: November 04, 2022, 11:12:43 AM »

"That melodeon isn't loud enough!"
(said no-one ever).
Having played in sessions with over-dominant boxes, a nice quiet box sounds wonderful.
 ;D ;D ;D
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Quiet Box
« Reply #4 on: November 04, 2022, 11:55:15 AM »

I cannot tell just how quiet your box is, 'cause if I turn the volume up it sounds very loud to me. Obviously, it mustn't be that loud in real life.
Whilst not wanting to contradict more knowledgeable folk, I did have an old thing, similar to yours, which was also too quiet for my liking. On taking it to bits, I found that the valves were glued for almost half of their length but when I sorted them so that the fixing glue left nearly all of the slot open when sounding the reed, it was just fine!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Quiet Box
« Reply #5 on: November 04, 2022, 12:30:28 PM »

I've got a couple of boxes like that one, and yes, they're quieter than more modern models, and as mselic says, they just are. I guess it's a combination of materials and construction methods. They may not be as assertive as later boxes, but they do have their own charm and character.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Quiet Box
« Reply #6 on: November 04, 2022, 02:12:23 PM »

Quote
...or is this just one of those things with these earlier boxes?

Yes and no.  Some older boxes were quieter, like this particular model, but some were quite loud too.

Quote
Having played in sessions with over-dominant boxes, a nice quiet box sounds wonderful.

Been there, heard that.  Usually the problem is not the over-dominant box, it's the person behind the box !  ;)

 
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Quiet Box
« Reply #7 on: November 04, 2022, 02:56:50 PM »

"That melodeon isn't loud enough!"
(said no-one ever).
Not true. After playing my Pokerwork for Hammersmith Morris and competing with traffic noise in the centre of Richmond on Thames, I was told "I can't hear you" and, more constructively, "get an Oakwood!", which I did and have never looked back.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Nic Pennsylvania

  • Lombardi A/D & B/E
  • Member
  • *
  • Offline Offline
  • Posts: 41
  • Northern Appalachia Accordion
Re: Quiet Box
« Reply #8 on: November 05, 2022, 12:12:29 AM »

Thank you, all.

I did open the box back up to go through it and I noticed some small wax gaps. I flowed some more wax in those area. It was also suggested that I clean the reeds. There is a wee bit of oxidization on them.

All said, I think this box will always be quieter, and that's no problem. It's nice to have something for late night practice around the house. Besides, it has a story and s'far has only cost me a little patience on the work bench.
Logged
Northern Appalachia Accordion

Stotty

  • Stotty
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 191
Re: Quiet Box
« Reply #9 on: November 05, 2022, 10:44:46 PM »

I've played a few old one row boxes and i have usually been struck by how "quiet" they have been compared to more modern Hohners etc.  It always makes me wonder, when I see photos of sword and morris dance teams in the 1920s and 1930s with melodeons,  how well the dancers would hear the music. I guess there were lower levels of background noise in those times.
Logged

Nic Pennsylvania

  • Lombardi A/D & B/E
  • Member
  • *
  • Offline Offline
  • Posts: 41
  • Northern Appalachia Accordion
Re: Quiet Box
« Reply #10 on: November 06, 2022, 12:04:58 AM »

I've played a few old one row boxes and i have usually been struck by how "quiet" they have been compared to more modern Hohners etc.  It always makes me wonder, when I see photos of sword and morris dance teams in the 1920s and 1930s with melodeons,  how well the dancers would hear the music. I guess there were lower levels of background noise in those times.

I wonder that, too.
Logged
Northern Appalachia Accordion

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Quiet Box
« Reply #11 on: November 06, 2022, 08:28:10 AM »

An issue with many of these boxes are the  ridiculously small round holes in the fondo. Why the maker would want to unnecessarily give away sound by not making them rectangular and as large as the construction allows, is beyond me.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Quiet Box
« Reply #12 on: November 06, 2022, 08:47:07 AM »

An issue with many of these boxes are the  ridiculously small round holes in the fondo. Why the maker would want to unnecessarily give away sound by not making them rectangular and as large as the construction allows, is beyond me.
The holes are not made rectangular as that is far more difficult to manufacture than just drilling holes. I suppose with the advent of laser cutters it would be easier to cut rectangular holes but that would need investment which would have to be measured against the perceived improvement.

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Quiet Box
« Reply #13 on: November 06, 2022, 09:17:14 AM »

You can also get square hole drill bits now, that have a little shroud and cam a cutting tool around inside them.

Much cheaper, safer, and easier to use than a laser cutter, but, also a relatively modern gadget, at least in terms of being cheap and available.

https://www.amazon.co.uk/s?k=square+hole+drill+bit
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Quiet Box
« Reply #14 on: November 06, 2022, 09:43:06 AM »

Laser cutters and CNC machines are admittedly a great help. However, from personal experience I know that one doesn't need more than a scroll saw and a file. It may take a little more time, but makes a big difference.
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Quiet Box
« Reply #15 on: November 06, 2022, 10:17:17 AM »

You can also get square hole drill bits now, that have a little shroud and cam a cutting tool around inside them.

Much cheaper, safer, and easier to use than a laser cutter, but, also a relatively modern gadget, at least in terms of being cheap and available.

https://www.amazon.co.uk/s?k=square+hole+drill+bit
Actually these are for a completely different machine, dedicated to cutting mortises. They don't cut a particularly clean hole and depend on the support of the surrounding timber to prevent breakout.
Diatonix's files are a better idea.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Quiet Box
« Reply #16 on: November 06, 2022, 10:30:11 AM »

You can also get square hole drill bits now, that have a little shroud and cam a cutting tool around inside them.

Much cheaper, safer, and easier to use than a laser cutter, but, also a relatively modern gadget, at least in terms of being cheap and available.

https://www.amazon.co.uk/s?k=square+hole+drill+bit

The mortise bit was invented in 1874

You don't need your own laser cutter to use one to make parts.  There are numerous businesses that will make from your designs.  And more suitable for the small scale maker there are community maker spaces in various locations where you can learn the skills and use their machines.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

MikeK

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 354
Re: Quiet Box
« Reply #17 on: November 06, 2022, 12:24:23 PM »


 I remember first using a mortiser at woodwork classes in school and that was in the early 60's.
Logged
I always respect my elders but they are getting fewer in numbers.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Quiet Box
« Reply #18 on: November 06, 2022, 03:24:30 PM »

An issue with many of these boxes are the  ridiculously small round holes in the fondo. Why the maker would want to unnecessarily give away sound by not making them rectangular and as large as the construction allows, is beyond me.

I think the answer is simple economics - they're not handmade instruments, and they would presumably been drilled to the maximum acceptable diameter, which would clearly mean a smaller than optimum area. What do you do - turn out hundreds of boxes that work adequately at an affordable market price, or make tens of boxes at 5 to 10 times the price that perform better but have a far smaller market?
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Quiet Box
« Reply #19 on: November 06, 2022, 08:21:32 PM »

Actually these are for a completely different machine
The mortise bit was invented in 1874

Sure, ok. My point was more, you can have one in whatever size you want, for cheap, tomorrow, and it seemed readily possible to attach one to a pillar drill.

If I wanted to make 2000+ square holes across 100 pieces of wood and I didn't want to learn CAD and deal with the challenges of laser cutting or other CAM, I'd probably still try to make something like this work for me? But, if as Squeaky Pete says, they're not useful for this kind of work, then never mind I guess.

If you wanted to square up an existing instrument's holes, hand tools all the way, though.
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal