Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: A Different Treble Limit Design  (Read 1543 times)

0 Members and 1 Guest are viewing this topic.

Nic Pennsylvania

  • Lombardi A/D & B/E
  • Member
  • *
  • Offline Offline
  • Posts: 41
  • Northern Appalachia Accordion
A Different Treble Limit Design
« on: November 05, 2022, 12:16:47 AM »

I didn't come up with the idea, and I'm not sure how common it is, but  I feel I've made some improvements. You might think it's a bit over-engineering, but I find it simple enough. I've been using this in my boxes and I'm curious as to what you all think.

https://www.youtube.com/watch?v=MhnBb8ebjDI&ab_channel=NicPennsylvania
Logged
Northern Appalachia Accordion

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: A Different Treble Limit Design
« Reply #1 on: November 05, 2022, 09:34:25 AM »



  I did this with my old Hohner. I simply cut a dowel ±1mm oversize, jammed it in. Did the job, but made it rattle horribly.
   After a month or so, I took it out, took off the plastic fingerboard (it was screwed in) and wedged some cardboard
  behind the levers. that worked too, and was far quieter!

  That kept me going for about six months, when I traded the Hohner in for a Castagnari, Lily. The extravagance didn’t go down
  well with the Memsa’ab, had to be compensated by getting her some John Swain bagpipes when her birthday came round. In
  retrospect that scrap piece of wood was … very cost-effective! 🤔
 

 
Logged
  _       _    _      _ 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: A Different Treble Limit Design
« Reply #2 on: November 05, 2022, 10:16:22 AM »

That looks effective Nic, if a bit over-engineered.  I use a simpler approach developed by the late Richard Morse of the Button Box that just requires a strip of wood screwed in place at the back of the keyboard like this:



The thickness of the wood strip has to be adjusted carefully but it's very effective.  It's best of the wood used is fairly soft which gives the buttons a soft landing, I use western red cedar, just because I happen to have some available. A secondary advantage of using softer wood is that if the travel is too limited you can press the lever firmly into the wood which crushes the surface and gives a useful additional range of movement.

More photos here
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: A Different Treble Limit Design
« Reply #3 on: November 05, 2022, 01:25:51 PM »

I use a simpler approach developed by the late Richard Morse of the Button Box that just requires a strip of wood screwed in place at the back of the keyboard like this...

Some years ago, inspired by Theo's photo guide, I discovered that a bit of softwood moulding from B&Q does the job beautifully.
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: A Different Treble Limit Design
« Reply #4 on: November 05, 2022, 01:38:01 PM »

I wouldn't be too happy with a bar over the pallets as too much pressure on the buttons could either bend the levers or crack the glue where the pallets are glued to the levers.
Theo's method is best.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Dave Praties

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 195
Re: A Different Treble Limit Design
« Reply #5 on: November 05, 2022, 03:16:35 PM »

I also favour Theo’s method, as the bar over the pallets leaves the buttons mobile, wobbly even, whereas Theo’s method means that they bottom firmly on the bar and come to a solid, positive stop rather like the buttons on a stepped keyboard that bottom out on the fingerboard. Much more pleasant to play I think.
Dave
Logged
Castagnari Handry 18 G/C. Castagnari Handry 18 D/G.    Self-built G/C 2.5/12 bass. almost finished after 7 years! Bb/Eb Preciosa. C/F Lilliput.

Nic Pennsylvania

  • Lombardi A/D & B/E
  • Member
  • *
  • Offline Offline
  • Posts: 41
  • Northern Appalachia Accordion
Re: A Different Treble Limit Design
« Reply #6 on: November 06, 2022, 12:00:10 AM »

Like I said, I have no issue with the wood strip method, but I've not been able to find a ready piece of wood and as such, I've spent much time shaping wood. This works better for me, and I've not had wobbly button issues. Both methods work, but aside from it from the over-engineering and $4 vs $1, I've not encountered any issues with this. I do not know how long he bar was in that Lombardi box that inspired me, but it was old enough that the tubing had yellowed a great deal. This suggests that there aren't issues long term.

 It also works on stepped boxes where the button travels too far. This is not a problem on my steirische boxes, but I have a couple melodeons with stepped fingerboards and the bar made them more playable.
Logged
Northern Appalachia Accordion

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: A Different Treble Limit Design
« Reply #7 on: November 06, 2022, 09:34:17 AM »

An easily installed fixed bar doesn't really seem massively over-engineered. As illustrated, it seems a simple and easily reversible addition to the box, using standard parts, which are easily sourced. Especially if the bit you seemed to find trickiest is made easier, by using a bit of heat to soften the tubing. From a technical point of view I wonder how easy is it to adjust to the best position but, I would think that is reasonably straight forward.

The bigger question is how effective is it as a solution? Have you had any feed back from other musicians, comparing it's playability with other solutions?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: A Different Treble Limit Design
« Reply #8 on: November 06, 2022, 11:45:01 AM »

I know this solution falls below the threshold for a 'proper' fix, but on an old Hohner I removed the keyboard base so I had access under the treble buttons  My local Lidl (UK) sold packs of various sized self-adhesive furniture felt pads (to prevent floor damage), included was a large pad of felt for self-cutting. A quick check seemed to show the thickness was good, so I cut to size, peeled off the backing and stuck it on. It was good, it gave a small amount of compression on the buttons' travel and as it was designed to be dense enough for chair legs, it didn't stay compressed in use.  Years on, it still works well, is silent and can, of course be removed or renewed.  OK, cheap and cheerful, not top drawer, but neither am I !!
PS I also used individually trimmed bits under the buttons on a 4 stop and they also worked well to limit travel.
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: A Different Treble Limit Design
« Reply #9 on: November 06, 2022, 05:21:18 PM »

For me, Rileycat's method seems to be the best solution, modifying the button lever travel at its extreme position of limit.
However, for a quick and easy method that is functional, Theo's suggested wooden strip under mid-lever (topped by felt) is fine.
I couldn't live with the superimposed bar method, I'm sure it works well but I get twitchy even when a pallet brushes against the grill on one of my Hohner HA114s   (:)
« Last Edit: November 06, 2022, 05:29:13 PM by gettabettabox »
Logged

Nic Pennsylvania

  • Lombardi A/D & B/E
  • Member
  • *
  • Offline Offline
  • Posts: 41
  • Northern Appalachia Accordion
Re: A Different Treble Limit Design
« Reply #10 on: November 16, 2022, 08:51:30 PM »

I know this solution falls below the threshold for a 'proper' fix, but on an old Hohner I removed the keyboard base so I had access under the treble buttons  My local Lidl (UK) sold packs of various sized self-adhesive furniture felt pads (to prevent floor damage), included was a large pad of felt for self-cutting. A quick check seemed to show the thickness was good, so I cut to size, peeled off the backing and stuck it on. It was good, it gave a small amount of compression on the buttons' travel and as it was designed to be dense enough for chair legs, it didn't stay compressed in use.  Years on, it still works well, is silent and can, of course be removed or renewed.  OK, cheap and cheerful, not top drawer, but neither am I !!
PS I also used individually trimmed bits under the buttons on a 4 stop and they also worked well to limit travel.


I'm going to have to try that for a stop accordion. I had a Gabanelli [sic] where no other method I know was feasible.

For me though, this bar design costs a little more, but is quicker than the piece of wood. Like I said, I haven't been able to easily acquire a ready piece of wood. I've shaped a few to size, only to have a screw split it. After two years, I haven't yet had any shortcomings with this bar so I will stick with it for the Vienna style boxes.
Logged
Northern Appalachia Accordion

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: A Different Treble Limit Design
« Reply #11 on: November 16, 2022, 08:55:13 PM »


for me though, this bar design costs a little more, but is quicker than the piece of wood. Like I said, I haven't been able to easily acquire a ready piece of wood. I've shaped a few to size, only to have a screw split it.

Always advisable to drill a clearance hole when driving a screw through a narrow strip of wood.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: A Different Treble Limit Design
« Reply #12 on: November 16, 2022, 10:29:52 PM »



Always advisable to drill a clearance hole when driving a screw through a narrow strip of wood.

And also, always rub the screw a few times against a bar of soap (traditional natural soap) before screwing into a new hole. It was one of those "why didn't I know this 10 years ago"-moments, when I learned that trick. Makes the screw follow the pilot hole much easier.
Logged

Nic Pennsylvania

  • Lombardi A/D & B/E
  • Member
  • *
  • Offline Offline
  • Posts: 41
  • Northern Appalachia Accordion
Re: A Different Treble Limit Design
« Reply #13 on: November 17, 2022, 08:49:36 PM »

I've done the pilot hole, but the soap is a new trick that I'll add to the toolbox. Thanks, all.
Logged
Northern Appalachia Accordion
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal