Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2 3 4   Go Down

Author Topic: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model  (Read 5931 times)

0 Members and 1 Guest are viewing this topic.

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« on: November 14, 2022, 10:44:04 PM »

I have this beautifully made Swiss box which I am having a go at restoring.
By information from this forum I have now printed out the button sheet which tells me exactly what button plays what.
I have tested each note with Dirks tuner and notice that the whole melodeon is flat as on the main graph every pitch is to the left of the green line on the graph.
This leads me to believe that it iwas not tuned to A 440 Hz but differently.
I am wondering if this is usual maybe to cater for flat clarinets??? ( freezing cold alps)"
When tuned I will only be playing it alone anyway so pitch does not matter so long the whole is in tune.
Should I adjust the 440hz down or up until the notes are pitched centrally to the green line?
I cannot think of any reason why it is so flat.
When I was in a band we all tuned to A.
The Bb clarinet played a B which sounded A 440 Hz.
Any clues much appreciated.
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #1 on: November 15, 2022, 01:34:08 AM »


I cannot think of any reason why it is so flat.


A few potential reasons....

A:440 is just one of the many pitch standards adopted over the years by musical instrument makers. See https://www.piano-tuners.org/history/pitch.html for instance; lots of other reading of interest if you Google, some sites more complex than others in their explanations.

A:435 was very common at one time, especially in continental Europe, and is likely the standard used on your Bachenbulach.

Also consider the amount of offset on a second set of M reeds to give a tremolo effect. I have worked on early/mid C20th melodeons with the offset reeds tuned either higher of lower (less common) than the standard pitch to achieve the desired effect.

Of course, your flat readings (reedings?) may have other causes: rust or dust on the reeds, poorly functioning flap valves, decayed wax seals, etc.  Probably worth checking out these basics before deciding upon whether or not to proceed with the complexities of retuning.

Good luck with the project.

« Last Edit: November 15, 2022, 01:40:46 AM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #2 on: November 15, 2022, 07:01:10 AM »

Thank you for your input Malcom.
With this particular model there is no wax!!!
It surprised me.
The reed shoes are just held with pins.
Yes there is rust on some of the reeds but not the bass ones which I have cleaned and revalved.
What tuner device do you use please?
If
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #3 on: November 15, 2022, 08:51:27 AM »

Malcolm is spot on about 435 being a common tuning.  I would go so far as to say it was the standard tuning on German boxes built prior to 1940.  Hohners are often marked 870 (2 x 435) on the reed blocks to indicate this.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #4 on: November 15, 2022, 10:13:35 AM »

It certainly gets interesting doesn't it.
So that would actually help to date my instrument.
I will just set my Dirks tuner to 435 and that should do the trick.
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #5 on: November 16, 2022, 02:27:08 AM »

I am doing okay for a novice.
It's a real pain to tune as the blocks are glued in so the only way to isolate three of the bass reeds is to remove them and replace them with specially made blocks of wood pinned down. Then I can tune my main bass note.
I have now tuned the four reeds which make up the main bass note. It's a nice wet thumping Bb which vibrates through to my knee.
The bass of the melodeon with all the reeds and buttons etc had to come on and off many times.
I will wear the screws out by the time I am finished.
There is no other way I can see to doing it.
The treble reeds will also be painful as the blocks are glued in and there are three to each note.
A work of art to look at but not made to be retuned.
Unless there is a sneaky way that my old brain has not twigged on.
Luckily the trebles are pretty much in tune so by the time I have cleaned and revalved them that might sort it.
I am now doing the G bass reeds.
I have a " lazy" G1 if that's the banter?
It needs quite a bit of air to get it going.
It is slow to come in.
Mind you it has a huge weight on the end so maybe that's why it needs time to come it?
Any ideas on lazy reeds please?
I am enjoying doing this.
The Dirks tuner cannot seem to make its mind up where to settle.
On starting to pump the note it generally reads way too flat then passes zero, goes sharp and then decides to settle.
I also use Hairy Wave!!! Tuner which I find more user friendly.
The trouble with dead accurate tuners is that they are so accurate it is hard for them to settle on the note.
At the end of the day my ear will tell me.
If my ear tells me that's okay then to me....it's in tune.
It's very subjective isn't it.
Some like dry, some like wet and some don't like it at all.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #6 on: November 16, 2022, 08:21:31 AM »

You are discovering all the fun of tuning!

Just one tip to isolate reeds.  You can place masking tape over the reeds you don’t want to hear.  You do have to be careful  when removing it so as not to pull off the valve.  If you don’t want to use tape then an alternative is to use small strips of stiff paper. Fircthe push Reed’s it’s simple to slip the paper under the reed tongue.  It’s a bit more awkward for the pull reeds but it is possible.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #7 on: November 16, 2022, 11:38:47 AM »

Thanks Theo.
I will try masking tape tomorrow.
I tried cellotape and yep it ripped the valve off.
With this box it is impossible to get to the pull reeds without removing them.
All reeds are not waxed but pinned with little right angled nails.
When I discover how to send images I would like to show you what I mean.
The treble reeds all sit around a rectangular box.
There are EIGHT banks of the buggers!!
The mechanism to open up the respective holes to sound the notes was designed by an extremely clever person.
I just kook in awe at at.
If I can crack this one then Pokerworks and Corsos should be a breeze.
I have definitely got the bug.
In eight weeks I have eight melodeons.
I have found a way of dispensing with screwing the base down every time to test it.
I saw a few tips on this forum how Lester does it with a piece of wood holding the bellows so they just hang down.
I have not even done that but stood the melodeon upside down on a cushioned chair so it does not fall off and then I placed the bass plate with all the reeds and buttons etc into the bellows and simply hold them together whilst pumping up and down and pressing the bass buttons.
System works.
Now I need to work out how to remove the long hinge rod within the finger board that holds the buttons and levers in.
It's been in there since 1940 odd and does not like the idea of coming out.
The ultra sonic cleaner came today so I cleaned some old reeds up. I used half vinegar and water with a drop of fairy liquid. It does the job. I rinsed them after with cold water and blow dried them with a heat gun.
I am becoming a nurd/ Geek or whatever the collective noun is for someone who finds Melodeons a way of life!

Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #8 on: November 16, 2022, 12:01:21 PM »

"In eight weeks I have eight melodeons."

What fun you're going to have!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #9 on: November 16, 2022, 12:07:15 PM »

Thanks Theo.

You are welcome.

Quote
With this box it is impossible to get to the pull reeds without removing them.

With any box you can get to the inside reeds to tune without taking the reeds off.  You just need a couple of very simple tools.  I have photos somewhere, but it may be quicker for me to take some new ones.
Quote
Now I need to work out how to remove the long hinge rod within the finger board that holds the buttons and levers in.
It's been in there since 1940 odd and does not like the idea of coming out.

Do you really need to remove it.  Unless the levers are sticking it's best left in place. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #10 on: November 16, 2022, 01:00:01 PM »

Whereabouts in the world are you Peter? You may find someone close by who’s willing to help/show you a trick or two.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #11 on: November 16, 2022, 02:30:37 PM »

I have a Bachenbulach - I re-fitted the reeds using a system used by Socin who was a contemporary Maker.  It may work on yours. It does away with all the 'pins' and utilises servo screws and a very fine 'fillet' of wood for the foot of the reed to sit in, which braces it against the block.  Makes reed fitting / removal very quick and easy.
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #12 on: November 17, 2022, 08:05:50 AM »

 :-*
Thanks Theo.

You are welcome.

Quote
With this box it is impossible to get to the pull reeds without removing them.

With any box you can get to the inside reeds to tune without taking the reeds off.  You just need a couple of very simple tools.  I have photos somewhere, but it may be quicker for me to take some new ones.
Quote
Now I need to work out how to remove the long hinge rod within the finger board that holds the buttons and levers in.
It's been in there since 1940 odd and does not like the idea of coming out.

Do you really need to remove it.  Unless the levers are sticking it's best left in place.
I will be interested to see the tools and how we get to the interior reeds from the exterior.
That might save a lot of hassle.
The hinge pin had to come out as the the wooden levers must have swollen and caused them the stick.
It was a long operation but I removed two hinge pins, cleaned and polished them and poked a graphite pencil into the lever holes, replaced the hinge pin leaving an an inch to chuck it up into an electric drill. I then started up the drill and freed up the hinge holes.
System worked.
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #13 on: November 17, 2022, 08:09:54 AM »

Whereabouts in the world are you Peter? You may find someone close by who’s willing to help/show you a trick or two.
I live in Narangba, Australia.
I don't think Melodeons are an Australian thing!
The good thing is that I can pick them up at a reasonable price coz no one is interested in them.
So in eight weeks I have eight melodeons.
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #14 on: November 17, 2022, 08:22:22 AM »

I have a Bachenbulach - I re-fitted the reeds using a system used by Socin who was a contemporary Maker.  It may work on yours. It does away with all the 'pins' and utilises servo screws and a very fine 'fillet' of wood for the foot of the reed to sit in, which braces it against the block.  Makes reed fitting / removal very quick and easy.
Now why did I not think of that?
Of course....Servo screws.
I build and fly model aircraft so should have thought of it.
Excellent idea and thank you.
Did you do any restoration to your Bachen bulach?
Are they valuable?...I ask as the workmanship is excellent all bar a few very annoying things one of which is that having pulled the two hinge pins out from the fingerboard to remove the levers that hold the buttons.   ........  They will not come out
Of the fingerboard without removing the buttons or worse cutting the top of the fingerboard off.
If lever spring breaks you are in big trouble.
It would have made more sense to have built a removable fingerboard a la Corso and to have the hinge pins within a separate piece of wood screwed to the fingerboard from the top so the whole lever assembly can easily be removed.
It is all fascinating stuff and as I work to free up these levers I think about Hohner and why they made the levers from metal and also as a complete removable unit.
All good fun and gives us something to worry about.
Logged

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #15 on: November 17, 2022, 09:23:12 AM »

You may find this video helpful. The reed lifter in use can be made from a bit of dowel and a paper clip, either epoxy the hook into the handle or beat the end bit flat before poking it into the dowel or it will revolve annoyingly. The reed support tool/pinger can be bought from Charlie Marshal but a feeler gauge is just as good. This is the Italian method of getting to the inside reed, Theo will no doubt demonstrate the German method, both need a little practice!

You will need two or three sizes of hook to cover the range of plate sizes


https://youtu.be/FMuma-gFx88
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #16 on: November 17, 2022, 09:40:06 AM »

The Italian reed hook is the best way when tuning reeds when the blocks are in the instrument.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #17 on: November 17, 2022, 10:12:29 AM »

The Italian reed hook is the best way when tuning reeds when the blocks are in the instrument.
Wow!!!
Thanks Pete
Thanks Theo.
I have seen these reed tuning sets and always wondered what the hook was used for...NOW .....I know!
I wonder who first thought of that. It is all so simple, brilliant and quick.
I have no doubt that Charlie Marshal can supply me with everything I need but fellah!....... I am in Australia and the postage costs would be expensive.
That said I am a cheap skate so If I can make it I will.
I was a fitter ( in the earlier days that meant " making " things )as to today's idea of a fitter!
I can easily make those tools and with posh beautiful wood handles turned on my lathe.
It gets better!
Theo are you in Australia?
You mentioned a treble stop on another post topic and you used Wetern Red Cedar which is Australian I believe.
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #18 on: November 17, 2022, 10:24:23 AM »

I am a little confused ( again)
I have a nice printed out sheet obtained from this forum which shows me diagrammatically which note falls on which button and pull or push.
Right...so the instrument is a Bb/ Eb.
Yet the eight odd ballers on the very top row are showing four C#s, two F#s and one G#.
On the very bottom row far left is another F#.
I was tought that if we are dealing with flats then stay with flats and leave sharps out of it.
I just find it confusing.
Just found the terminology...
It's the keyboard layout WITH unisonoric Bb button middle row!!! I would never be without !
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #19 on: November 17, 2022, 11:32:33 AM »


Theo are you in Australia?
You mentioned a treble stop on another post topic and you used Wetern Red Cedar which is Australian I believe.

No I'm in UK!

Western red cedar in the timber trade here comes from the west coast of N America.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1] 2 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal