Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3 4   Go Down

Author Topic: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model  (Read 5911 times)

0 Members and 1 Guest are viewing this topic.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #20 on: November 17, 2022, 12:40:30 PM »

I am a little confused ( again)


All tuning software (and hardware tuners) only show sharps, it’s the nature of the beast just remember that the name are synonymous, C#=Db G#=Ab and F#=Gb. No way around it that I know of, you just have to live with it.


As you are a tool maker the reed pinger can be made from a strip of spring steel. I’ll post a link (when I find it) to a video of a melodeon maker who obviously makes some of his own tools, but the ones shown would probably be difficult to use with the blocks in situ.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #21 on: November 17, 2022, 12:59:01 PM »

Peterson tuner lets you choose all sharps, or some flats.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #22 on: November 18, 2022, 07:23:01 AM »

Accordion tuning tools.


https://youtu.be/rdap-lYsKbw
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #23 on: November 18, 2022, 07:34:54 AM »

General interest, Pre-tuning accordion reeds.


https://youtu.be/PJdU8l4foRA
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #24 on: November 18, 2022, 07:38:09 AM »

General interest, Italian reed maker at work.


https://youtu.be/GgYYyn72HLI
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Willem Feltkamp

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 129
  • Tinkering and playing diatonics and CBA
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #25 on: November 20, 2022, 12:19:54 PM »

you might try to make your own tools.
I made reed lifters (the hooks for the inside reeds) using paperclips and square sticks of wood, tying them with cellotape.
Blades to lift or support reeds: I cut off old knives' blades (the thin carbon steel type)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #26 on: November 20, 2022, 12:36:27 PM »

Yes, many of the tools you need are simple and relativly easy to make.   You may find paper clip material to be a little too soft.  Piano wire aka music wire of about .7mm diameter is stiffer and will hold it's shape.  I had difficulty in getting the wire firmly attached to a wooden handle so that it would not twist.   My current reed hook which has been in regular use for about 7 years (and I use it a lot) has a handle made by folding the wire a few times like a large version of paperclip, then wrapping it.  I wrapped with olovisc because it was handy.  A higher quality wrap would be to use leather.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #27 on: November 20, 2022, 01:08:42 PM »

You may find this video helpful. The reed lifter in use can be made from a bit of dowel and a paper clip, either epoxy the hook into the handle or beat the end bit flat before poking it into the dowel or it will revolve annoyingly. The reed support tool/pinger can be bought from Charlie Marshal but a feeler gauge is just as good. This is the Italian method of getting to the inside reed, Theo will no doubt demonstrate the German method, both need a little practice!

You will need two or three sizes of hook to cover the range of plate sizes


https://youtu.be/FMuma-gFx88

At least this guy has learnt how to lift the inner reeds, but this is not how a professional  works. Unfortunately, there are a lot of wannabe accordion "tuners" posting dubious "tutorials" on youtube.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #28 on: November 20, 2022, 03:55:53 PM »

"but this is not how a professional  works"

Are you willing to give the game away, then? I'm sure their are many DIYers out here who are eager to learn. (Including me, of course!)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #29 on: November 20, 2022, 05:53:43 PM »

"but this is not how a professional  works"

Are you willing to give the game away, then? I'm sure their are many DIYers out here who are eager to learn. (Including me, of course!)

It took me 4 years to get my official German diploma in this and other accordion-related "games". I'm not saying it's rocket science, but it's probably not something one can learn by simply watching a few youtube videos either. That said, Theo is absolutely right (and it cannot be stressed often enough): Tuning must be done with the blocks in situ. It is easier, faster and more accurate. Even when, for whatever reason, the block must be taken out of the instrument to access the reed (as is the case with, f.ex., cassotto accordions) the final check is again done with the block in situ.
« Last Edit: November 20, 2022, 06:09:37 PM by diatonix »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #30 on: November 20, 2022, 08:14:23 PM »

  And also for your info I’ve watched Theo tuning on a table, plus one or two others, so they do have their place.


I only use a tuning table for pre-tuning or checking the behaviour of reeds that don’t sound properly. I do all final tuning with the reeds in situ.  I also complete the waxing before starting tuning.  The little tiny air leaks round the edge make a difference too.

In the distant past I was green enough to do final tuning with the reed blocks out of the instrument.  At the time tuning in the instrument seemed impossibly difficult, but thanks is to advice tips and hints from numerous more experienced people I’ve been climbing the learning curve ever since.  Not many weeks go by without learning something new.  An old concertina has just taught me something useful earlier today!

It seems you have to work like a detective in this business, always looking for information, piecing ideas together, refining processes and improving skills.
« Last Edit: November 20, 2022, 08:15:54 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #31 on: November 21, 2022, 08:45:07 PM »


I have tried to reply to you all several times but " Things " went wrong with my mobile so this is just a test from my pc.
If this posts okay I will reply more comprehensively.
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #32 on: November 21, 2022, 09:33:39 PM »

Okay..The trial post worked so herewith my collective reply to all that have helped me.
First of all many thanks for all the tips and all has been duly noted and especially Pete for the videos about tuning which were a pleasure to watch. I have noted that three separate tuners used the Korg OT 120 Orchestral tuner with a nice analogue swinging needle to zero the pitch. I have ordered one but will take three weeks. I am hoping I can set it to say plus or minus 5 cents (  just an example ) from the A 440 hz so that the needle can always point to zero as to how I have set it.
With reference to wannabe Tuners.
I am a novice to this game and very passionate about learning how to tune a Melodeon.
This is why I am lucky enough to be accepted as a member of this forum so as to learn and also plant a few of my ideas about it. A fresh set of eyes can bring up things that are glaringly obvious but repairers have lived with it for decades.
Every one of us was a wannabe at some stage and if there were no wannabes there would be a lot of melodeons in the dump by now.
I take note that there are a few " Corkers" one should be wary of with their you tubes and as a novice I am starting to pick them out!
It is commendable to have been lucky and financially stable enough to have completed " The course" on this but not all of us are able to do this.
Short story...I was living in Germany at the time and after completion of my first violin which actually did not sound bad at all, I was curious to see what an expert violin repairer/ maker would think of it so off I went to town to find out.
On passing him the violin, he examined it with pursed lips and then asked me " Und vair haf you learned how to do dis?"
I said " From a very old book called Violin Making as it was and is and also a violin maker who lived locally".
" So you haf not been to violin making school?"
" No."
" Den you haf learnt badly "
He handed me my violin and without a further word, I left the shop broken hearted.
One less violin maker in the world!!!!!!  But the journey was both a dream fulfilled and I gave it a go!..Like many many things in my life that I do not regret.
I have made a rather posh guillotine that will chop leather or Mylar reed valves to exactly the correct and variable width every single time and also the lengths.
I have a leather shop just down the road which has a variety of leather thicknesses/
It is mostly Kangaroo leather which is very fine and should do the job.
Are there any reasons why I should NOT use this leather?
Must it be finest Italian Leather?......
I can now quite quickly chop up my reed valves which look to me to be pretty good.
I am also now making some wooden reed shoes? Blocks of wood which hold the reeds for testing.
I take note " Full on" about tuning using the instrument itself because then all reeds are vibrating within their own "House" ( Within their working environment and air supply ).
I am only using my tuning table to highlight and fix reeds that do not work at all or sound ghastly for whatever reason.
Would a professional accordion maker PRE TUNE reeds as per video?
At a guess  I would say Yes?

 
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #33 on: November 22, 2022, 10:19:24 PM »

RogerT: My comments were made out of frustration and not meant to be derogatory. But I fully stand by them.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #34 on: November 23, 2022, 08:35:56 AM »

Whether you need to pretune depends on what you are doing.  If they were originally tuned at 435 and you want 440 yes pretuning will be worthwhile. Factory fresh reeds could be worth checking to make sure all are close enough to the target pitch. Same if the reeds are old and have been cleaned if heavy rust.  But it’s not always necessary. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #35 on: November 23, 2022, 11:41:31 AM »

Whether you need to pretune depends on what you are doing.  If they were originally tuned at 435 and you want 440 yes pretuning will be worthwhile. Factory fresh reeds could be worth checking to make sure all are close enough to the target pitch. Same if the reeds are old and have been cleaned if heavy rust.  But it’s not always necessary.
Thanks Theo.
I have cleaned all the reeds now including using the ultra sonic cleaner. I used water and vinegar at first but found that although rinsed with water afterwards they started to show signs of rust very quickly so I changed to using Bicarbonate of soda and water and that did the trick brilliantly.
I have revalved the complete Melodeon.
Eight banks of treble reeds.
Took me five days but that includes making the leather valve chopper.
I have put it all back together and it plays!!
A lot better than before but just a few notes need some spot tuning.
It's nearly there.
I noticed a one reed of a set of three trebles does not work.
It is the lowest note of the three.
I will have a look tomorrow.
I noticed that on the tuning table there were at least three reeds that did not sound at all so I waited until they were all in the box and they seem okay .
I was excited to get it back together and test my labours.
I will do some fine tinkering tomorrow and also get all the buttons the same height.
There are a heck of a lot of wires ( levers) in it and I need to carefully work out what needs bending and where.
I am getting there.
Somebody mentioned a sound chamber or tone box?
I think mine fits that description as all the banks of reeds are fitted ( pinned ) to a rectangular box in sets of three.
If and when I have to retune anything I will use the melodeon itself as the tuning table by just holding the treble end into the bellows, pressing offending button and go from there.
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #36 on: November 23, 2022, 12:02:18 PM »

I am a bit surprised that all eight banks of treble reeds are merely pinned to the tone chamber. No wax.
There does not seem to be any evidence of wax having been there at all but it strikes me as odd.
Do you think I should wax them in ?
I have some Italian reed wax.
The last time I tried it with a home made waxing spoon on another box ( now binned) made a jolly  mess as the wax set too quickly.
If I do it again I will do it like Lester did with a soldering iron.
At least I think it was a soldering iron?
There must surely be air leaking with unwaxed reeds?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #37 on: November 23, 2022, 12:34:01 PM »

Don't use wax unless it's absolutely necessary.   If it was designed to work without wax the is a much better system.


Quote
I am a bit surprised that all eight banks of treble reeds are merely pinned to the tone chamber. No wax.

Can you post a photo.  I think we might be using different terminology.
« Last Edit: November 23, 2022, 12:36:03 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #38 on: November 23, 2022, 04:31:12 PM »

I am a bit surprised that all eight banks of treble reeds are merely pinned to the tone chamber. No wax.
There does not seem to be any evidence of wax having been there at all but it strikes me as odd.
Do you think I should wax them in ?
I have some Italian reed wax.
The last time I tried it with a home made waxing spoon on another box ( now binned) made a jolly  mess as the wax set too quickly.
If I do it again I will do it like Lester did with a soldering iron.
At least I think it was a soldering iron?
There must surely be air leaking with unwaxed reeds?

I've seen other Bachenbulach boxes with the reeds pinned to bare wood of the blocks. No wax, no gasket - and no leaks. This was an established construction method in Swiss accordions.

PG
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Tuning a Swiss Bachenbulach ( Tell) Bb/ Eb Club model
« Reply #39 on: November 23, 2022, 09:42:03 PM »

"No wax, no gasket - and no leaks. This was an established construction method in Swiss accordions."

I've always thought that you'd get a more pure sound without gaskets or wax, but was sceptical about getting the reeds to seal properly. But here we are with the watchmaking Swiss (famous for their precision engineering) doing it years ago!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: 1 [2] 3 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal