Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Rough Checking Tuning  (Read 664 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Rough Checking Tuning
« on: November 15, 2022, 06:36:44 PM »

If you are checking tuning of a 2 voice box without stopping off either reed bank, Am I right in thinking that a digital tuner will pick up the median frequency of the two reeds?
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Rough Checking Tuning
« Reply #1 on: November 15, 2022, 06:53:49 PM »

In theory yes, but I think the tuner reading will also depend on the relative level of the 2 reeds.  If one is louder, it would bias the reading towards it (an extreme case being when one of the reeds does not sound at all !).

 
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Rough Checking Tuning
« Reply #2 on: November 15, 2022, 07:51:05 PM »

Sometimes the reading will swing between the two in time with the tremolo.  This is more noticeable with swing tuning than with wetter.

On the whole I don't think it is very helpful to use a tuning meter designed to detect one pitch to measure two reeds sounding together.  More productive is to listen to the beats and compare how the beat rate changes between notes, and between the same note on push and pull.  When an instrument goes out of tune from after a great deal of playing it is unusual for pairs of reeds to both change by the same amount.  So a change in beat rate is a good indication that one or both reeds is out of tune.

Or use a tuner designed to identify two or more pitches sounding at the same time.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Rough Checking Tuning
« Reply #3 on: November 15, 2022, 07:51:37 PM »

Bill Farmer's Tuner app will give you both reeds
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Rough Checking Tuning
« Reply #4 on: November 16, 2022, 11:53:50 AM »

Sometimes the reading will swing between the two in time with the tremolo.  This is more noticeable with swing tuning than with wetter.

On the whole I don't think it is very helpful to use a tuning meter designed to detect one pitch to measure two reeds sounding together.  More productive is to listen to the beats and compare how the beat rate changes between notes, and between the same note on push and pull.  When an instrument goes out of tune from after a great deal of playing it is unusual for pairs of reeds to both change by the same amount.  So a change in beat rate is a good indication that one or both reeds is out of tune.

Or use a tuner designed to identify two or more pitches sounding at the same time.
Theo. What you have just written I find so valuable.
It was only the other day I was playing my Hohner Corso with three sets of reeds and I deffo did notice that the beat rates vary quite a lot.
It occurred to me right then that if I could fettle it so the beat rates please my ear then it will likely be in tune again.
I don't know the MMM thingey with  Corso.
Is is -M M M+?
I am a novice just learning this terminology so forgive me if it sounds stupid.
I only learnt yesterday what a unisonoric button is!!!
I had to google it.

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Rough Checking Tuning
« Reply #5 on: November 16, 2022, 12:01:05 PM »

There are no stupid questions if you are seeking information.

Corso is usually M-MM+.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal