Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner glued in reedblocks - which glue?  (Read 428 times)

0 Members and 1 Guest are viewing this topic.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Hohner glued in reedblocks - which glue?
« on: November 16, 2022, 08:48:07 PM »

I'm tidying up a Hohner 4 stop and when taking out the reeds I noticed the glued in blocks seemed loose. Where they touch each other it all seems fine but there is definite movement allowing the blocks to flex, especially the one with the L reeds .
The brown glue seems to have gone brittle. I have seen this on the joint around the Fondo and have just run PVA into the joins to seal any airleaks. But I suspect that might not be appropriate here.
It's a silver ended 17 fold bellows model with plastic keyboard so I presume 50s or 60s?
So what glue do I use?
Incidentally the reeds are all rusted next to the valve glue.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner glued in reedblocks - which glue?
« Reply #1 on: November 16, 2022, 08:53:05 PM »

PVA doesn't bond effectively to hide glue or other gelatin glues.  If you want to use modern glues then sand off the old glue down to a fresh clean wood surface.  Or do a less extensive clean down and use a traditional glue.  I've found fish glue to be handy for occasional use in this sort of situation because it is supplied as a liquid so there is no need for a glue pot.  It also gives a longer open time than hot glue which I often find useful.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Hohner glued in reedblocks - which glue?
« Reply #2 on: November 16, 2022, 09:03:59 PM »

I have no fish glue, but plenty pearl glue, so hot glue it is ,
I'll put some to soak before bed.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal