Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Refurbishing a Liliput - strange corrosion on reed  (Read 1947 times)

0 Members and 1 Guest are viewing this topic.

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Refurbishing a Liliput - strange corrosion on reed
« on: November 05, 2009, 01:28:47 PM »

I am in the process of refurbishing a Liliput and I've come across what looks like bi-metal corrosion on one of the treble reed rivets. It's on the inside of the reed block, so only visible when the reeds are removed. There is a very small amount of corrosion on the some of the reed tongues, and there was evidence of something having been spilt on the keyboard at one time. Is this anything to worry about? I was just going to clean it off and forget it.
Logged
Bill of Old Radipole Village

michik

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 412
Re: Refurbishing a Liliput - strange corrosion on reed
« Reply #1 on: November 05, 2009, 02:08:06 PM »

I had a similar korrosion at the edge of the reed plates (zinc) ...
it was due the contact with a leather strip (chrome tanned) on the reed block

First I clean the reed plate with a glas fiber eraser, after that they
are soacked in a special solution (which I bought from a accordeon spare part shop for this purpose)
to dissolute remaing wax and glue

Michael
Logged
Michael Knapp ~ Vienna ~ Austria
Playing on "Parigi Giovani" G/C (made by Bompezzo) - My recordings: http://www.onmvoice.com/mknapp

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Refurbishing a Liliput - strange corrosion on reed
« Reply #2 on: November 05, 2009, 02:28:25 PM »

The corrosion on that tongue looks like normal rust so there is nothing to worry about there. Clean as much off with a Maplin scratchy pen or some very abrasive paper as is possible.

With the corrosion around the rivet, I would guess that the addition of the second metal (as a salt? I don't remember my chemistry A level so well...) isn't too much to worry about as it has deposited material as opposed to removing it and weakening the joint. Clean it off and take a look - it might be obvious that the rivet is weaker from it, but you cant tell from the photo.

I use lint free cloth (pair of old boxers) and some white spirit to get any wax residue and finger grease off I might have got on the tongue and plate whist de-rusting.
Logged

Bill the Farmer

  • Not quite so
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 497
  • Hohner Club, Liliput...
    • Bill Farmer
Re: Refurbishing a Liliput - strange corrosion on reed
« Reply #3 on: November 06, 2009, 02:03:49 PM »

Thanks for the response, the corrosion must be some sort of zinc oxide or salt. I've cleaned it off, as you suggest, there's no damage to the rivet.
Logged
Bill of Old Radipole Village
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal