Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tuning a 1040 with tremolo ?  (Read 580 times)

0 Members and 1 Guest are viewing this topic.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Tuning a 1040 with tremolo ?
« on: December 10, 2022, 03:06:55 PM »

Hi all,
This question is more about reading the tuner.
I have got one bank to pitch and the other with a hohner offset or very close to it.
The box is in G, it sounds pretty good to me overall.

So the question when playing both reeds together ( to the tuner ) on several notes I can get the tuner to stop dead on ( even though it still flutters a bit. Other notes are slightly higher than pitch and jumping around / fluttering more between the two pitches.
What’s going on? Is this the target I should achieve?

The only box that I have that is dead on with tremolo is my Baldoni ( good tuner)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Tuning a 1040 with tremolo ?
« Reply #1 on: December 10, 2022, 03:55:35 PM »

Generally, you use a tuner to measure only one note/pitch at a time.  I understand that there are tuning apps like Dirk's that measure multiple pitches simultaneously, but that doesn't sound like what you're asking about. Tune one reed at a time, using the tuner to reach your target pitch spot-on.  If a tuner is hearing multiple pitches (such as a two voice instrument with a tremolo), it will roughly average out the two and give you the median pitch, but that's not particularly accurate or useful in most cases.
Logged
C#/D player

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Tuning a 1040 with tremolo ?
« Reply #2 on: December 10, 2022, 04:18:40 PM »

Generally, you use a tuner to measure only one note/pitch at a time.  I understand that there are tuning apps like Dirk's that measure multiple pitches simultaneously, but that doesn't sound like what you're asking about. Tune one reed at a time, using the tuner to reach your target pitch spot-on.  If a tuner is hearing multiple pitches (such as a two voice instrument with a tremolo), it will roughly average out the two and give you the median pitch, but that's not particularly accurate or useful in most cases.
The last part is my question.
I do get average on most notes but a few seem to be closer without any movement, even with added pressures. Most of my boxes show a rough average between the two pitches ( as I would expect ).

Edit to add : so maybe as you say not accurate or useful?
« Last Edit: December 10, 2022, 04:21:11 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Tuning a 1040 with tremolo ?
« Reply #3 on: December 10, 2022, 04:59:21 PM »

Sometimes it will lock onto one reed then the other giving a repeated swinging in the readings. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal