Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Blue metal steel packing strap material for reeds.  (Read 1707 times)

0 Members and 1 Guest are viewing this topic.

Polkadot

  • Member
  • *
  • Offline Offline
  • Posts: 26
Blue metal steel packing strap material for reeds.
« on: December 13, 2022, 10:19:32 AM »

Hello newbie question. Has anyone heard of the use of blue metal steel packing strap being used for making a melodeon reed? It seems to be about the right thickness comparing it to a hohner treble reed. It also seems to be very springy.
Logged
HA 114 D G C and A
BC and DG Pokerwork, Double Ray and Double Ray Delux.
Hero D and C

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Blue metal steel packing strap material for reeds.
« Reply #1 on: December 13, 2022, 12:04:03 PM »

I seem to recall a similar thread a few years back, but I can't remember what, if any, conclusions it came to. Might be worth a search...
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Blue metal steel packing strap material for reeds.
« Reply #2 on: December 13, 2022, 12:55:42 PM »

Polka, if it works, it would be right at home with the saw blade air button...
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Matt T

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Blue metal steel packing strap material for reeds.
« Reply #3 on: December 13, 2022, 01:10:33 PM »

Lots of discussion on the practicalities of reed making here:

http://forum.melodeon.net/index.php?topic=17968.0
Logged

Polkadot

  • Member
  • *
  • Offline Offline
  • Posts: 26
Re: Blue metal steel packing strap material for reeds.
« Reply #4 on: December 14, 2022, 09:17:55 AM »

Thank you.
Logged
HA 114 D G C and A
BC and DG Pokerwork, Double Ray and Double Ray Delux.
Hero D and C

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Blue metal steel packing strap material for reeds.
« Reply #5 on: December 16, 2022, 06:59:44 AM »

I am new to this but the idea will not work.
1 Packing band is likely to be of a different stiffness to specially made reeds for accordions or Melodeons.
I have experience with packing band and it is not the ideal temper for reed use. It is  too " Soft" and maleable.
2 How will you accurately taper the reeds so that they fall exactly within limits to vibrate on pitch?
3 I am all for Diy and exploring " alternative" measures but to contemplate making your own reeds to length, correct taper , thickness , temper, drilling the the holes to absolute pitch would be out of bounds to the novice .
Reed making is a highly specialised art and to contemplate DIY
Is beyond my comprehension.
However I wish you the best and I hope you can prove me totally wrong.
Is this a wind up or is it possible to make a reed?!!$⅝



Peter.
 
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Blue metal steel packing strap material for reeds.
« Reply #6 on: December 16, 2022, 07:27:15 AM »

Flaco Jimenez used to make the odd replacement reed tongue from old clock springs when reeds weren't readily available.
« Last Edit: December 16, 2022, 07:42:12 AM by Rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Blue metal steel packing strap material for reeds.
« Reply #7 on: December 16, 2022, 01:20:47 PM »

Not really off post I remember a long discussion with wonderful pictures (and tales!) of the amazing (but true!) materials that banjo heads can be made of.
Not optimal materials but possible...
I shall search...
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Blue metal steel packing strap material for reeds.
« Reply #8 on: December 16, 2022, 02:44:02 PM »


  As needs must! I’m not up to reed-making, but did have to wax 6-8 reeds back in with a heated tent peg … 35 years ago. Infant son flicked the melodeon off my shoulder at Beverley festival 🥴 Araldited the split frame corner when we got home.

   Well done Flaco! Very impressed 😳
Logged
  _       _    _      _ 

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Blue metal steel packing strap material for reeds.
« Reply #9 on: December 19, 2022, 03:06:04 AM »

I have had to make reeds on a couple of occasions. watch or clock spring steel is good, the fun part is drilling the hole. This is usually done with a special punch die. To save myself the grief i usually use a larger reed and file it down to size, it takes time and sometimes more than one try.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Blue metal steel packing strap material for reeds.
« Reply #10 on: December 19, 2022, 04:57:02 PM »

I’ve just been making a reed for a bandoneon (I found a used reed of roughly the right size). The tricky part was getting the old rivet out of the bandoneon reed plate. Any tips on how you do this? I drilled it out in the end. I tried to punch it out but it wasn’t having it. And also…do you make your little 1.5mm (or thereabouts) rivets?

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Blue metal steel packing strap material for reeds.
« Reply #11 on: December 19, 2022, 11:03:50 PM »

"Any tips on how you do this?"

This is probably the wrong way, but I usually file the rivet at the reed end until the reed is almost falling off; then bash the rivet out with a (smallish) hammer and punch. Never been a trouble to date!
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Polkadot

  • Member
  • *
  • Offline Offline
  • Posts: 26
Re: Blue metal steel packing strap material for reeds.
« Reply #12 on: December 20, 2022, 03:39:57 AM »

I stand the reed plate against the bench vice vertically. Hold the cold chisel against the rivet and with one firm blow, the rivet head comes off. Then open vice slightly and tap rivet through plate with large nail slightly flattened at the end. Rivet pops out.
Logged
HA 114 D G C and A
BC and DG Pokerwork, Double Ray and Double Ray Delux.
Hero D and C

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Blue metal steel packing strap material for reeds.
« Reply #13 on: December 20, 2022, 07:50:18 AM »

Quote
This is probably the wrong way
I don’t think so Winston (though we do get told off on this forum by some people occasionally). If it works then it’s ok.
And what do you use for the new rivet?

Polkadot

  • Member
  • *
  • Offline Offline
  • Posts: 26
Re: Blue metal steel packing strap material for reeds.
« Reply #14 on: December 20, 2022, 08:28:08 AM »

The bass machine rods from a donor PA are an excellent source of rivets.
Logged
HA 114 D G C and A
BC and DG Pokerwork, Double Ray and Double Ray Delux.
Hero D and C

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Blue metal steel packing strap material for reeds.
« Reply #15 on: December 21, 2022, 07:42:18 AM »

I grind the rivet down to slightly below flush on the old reed with a dremel, then use a drift to punch it out. I have found self hardening aircraft rivets work very well, you have to anneal them and use them within the hour.  Old hohner reeds seem to have the same rivet hole size so I make the new reed out of those.
Brass escutcheon pins work well as rivets too but you must heat them to red heat then let them cool before using them. You can do this by setting them on a brick and heating them with a blow torch (I use a crack lighter from the Head Shop down the street.
 I have never had a rivet work loose in 20 years.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Blue metal steel packing strap material for reeds.
« Reply #16 on: December 22, 2022, 10:26:25 PM »

Intrigued by the self-hardening rivets - are they readily available? Didn't find much on Google.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Blue metal steel packing strap material for reeds.
« Reply #17 on: December 23, 2022, 08:23:15 AM »

Here is a explanation of the alloy types, https://monroeaerospace.com/informational-rivets.php You can get bulk rivets on eBay and specific types from aircraft parts suppliers.
 I make Mad Max style cosplay armor out of formed traffic signs and learned a lot about aluminum rivets in the process. Also learned a lot about aluminum forming.
« Last Edit: December 23, 2022, 08:26:57 AM by Kimric Smythe »
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal