Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: The “naming of parts”  (Read 2388 times)

0 Members and 1 Guest are viewing this topic.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
The “naming of parts”
« on: December 25, 2022, 10:11:46 AM »


   Common vocabulary helps avoid misunderstanding? Brian JM has just found a youtube, describing box  voicing in terms of organ pipes!  Here’s how I think that we describe our melodeons here. All open to debate, and the weekend’s UK telly looks dire 😉

In terms of right-handed play …

Right end: is occasionally referred to as treble end
                2-row, 3-row, 2+5-row (eg Mory)
                Name the diatonic rows,  from outside => inside  eg D/G, G/C, B/C
                helper rows generally referred to as ‘accs’
                    except that a 2-row ‘+accs’ refers to head end buttons
                ‘Club’ system means that middle 5th/6th (eg D,E on a G row) is changed to 5th both ways (D,D)
                ‘Dutch’ inversion or reversal has notes of that button opposite ways = E,D

                Default set-up is tonics of diatonic rows at 3rd button towards the floor from head end the melodeon’s chinward side
               â€¦  ‘4th start’ is an increasingly popular layout in UK (suiting)m D/G systems, with tonic is 4th from head the chinward side

                ‘Voicing’ is number of reeds per button, we use L=low M=mid H=high
                     Might be LM, MM, MM* tremolo, ‘Dedic’=M-/M+, LMH or LMMH on 1-row kit

                     Default for M on the innermost main is C4 in piano notation, middle C 🤔

 Left end    often called bass end, is described wrt its button count 2-bass, 4-bass, 8-bass, 12-bass, 18-bass etc
                     The buttons are chord/bass pairs by default. Free bass notes are not uncommon, describe as necessary

                3rds ‘in’, ‘out’, ‘no’ … means a middle chord note is absent, taped or switched out. eg triad G+B+D => G+D
           
                Left end voicings vary quite a lot and usually need explicit description 🤔 Any ideas?

What have I missed out? Or got wrong?
« Last Edit: December 25, 2022, 05:08:01 PM by Chris Ryall »
Logged
  _       _    _      _ 

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: The “naming of parts”
« Reply #2 on: December 25, 2022, 12:59:00 PM »

The only thing that bothers me slightly is "3rd button down from head end"; I would have said simply "3rd button from head (or chin!) end", as a) there is only one direction you can move from the end of the keyboard and b) "down" would mean to me "lower in pitch" rather than physically lower. I have the same kind of problem with online guitar tutorials that talk about the "top" string, which to me is the high "E", when they mean "furthest from the floor", which is the low "E" and therefore the bottom string, not the top one.  You can tell I'm at a bit of a loose end at present, can't you.......??
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: The “naming of parts”
« Reply #3 on: December 25, 2022, 01:15:32 PM »

Thought we had decided on 'chinmost' and 'kneemost'  (:)

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: The “naming of parts”
« Reply #4 on: December 25, 2022, 03:34:10 PM »


   Thanks chaps. Please keep the corrections coming. Dear me … the telly is awful and we did the big meal here on the 21st 🙂

   Off to look at Lester’s terminology page. Didn’t know it existed!
« Last Edit: December 25, 2022, 03:36:27 PM by Chris Ryall »
Logged
  _       _    _      _ 

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: The “naming of parts”
« Reply #5 on: December 25, 2022, 03:57:12 PM »

Thought we had decided on 'chinmost' and 'kneemost'  (:)

Had we? OK, if that's the general feeling.  As a retired teacher of English (note NOT "Emglish teacher", which would mean something entirely different) I applaud the sentiment, though I'm not convinced by its linguistic integrity!  If it works for you, fine.  It's good job I don't apply the same degree of pedantry (or is it the local wine on this festive evening?) to my melodeon playing; if I did I'd probably still be on "Three Blind Mice".....  ;D

Merry Christmas, all!

PS In case you were wondering, I'd have gone for "chinward" and "kneeward", as the root words are nouns, not adjectives.....
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: The “naming of parts”
« Reply #6 on: December 25, 2022, 08:23:53 PM »

Common on PAs to name voicing after organ pipe length: L=16', M=8', H=4', so I can see why some might use the same terminology for melodeons, too.
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: The “naming of parts”
« Reply #7 on: December 26, 2022, 10:28:36 AM »

Common on PAs to name voicing after organ pipe length: L=16', M=8', H=4', so I can see why some might use the same terminology for melodeons, too.

   thanks, Chris. I can see a few pitfalls with that. One is that Helmholtz, ie tick notation C C’ C’’ C’’’ etc is used in France and elsewhere for octaves. (Confusingly French then voice their bagpipes in “inches”)! 😳

   But the main issue is appropriateness. Pianos are ubiquitous and I think everybody in the world understands the concept of middle C (C4). Only a few avant-garde jazz theorists in the 1950s, have ever really queried it. 

  I see no logic, and little merit in using a system designed for static instruments, based on a vibrating column of air to describe something whose principle is free reeds. Reed length might make more sense, but that doesn’t get us very far either?   I’ll keep out of the relative weights of a PA, compared to a lead alloy organ pipe 😉  And while 8 foot free reed harmonicas … do exist, they are a bit of a mouthful! 

   But fundamentally commonality of terms seems better than building another Tower of Babel? 
« Last Edit: December 26, 2022, 10:34:20 AM by Chris Ryall »
Logged
  _       _    _      _ 

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: The “naming of parts”
« Reply #8 on: December 26, 2022, 12:04:22 PM »

I'd never heard of the organ pipe length naming system until I saw it on Chris M's previous post...
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: The “naming of parts”
« Reply #9 on: December 26, 2022, 01:51:07 PM »

Common on PAs to name voicing after organ pipe length: L=16', M=8', H=4', so I can see why some might use the same terminology for melodeons, too.

I can see it....but organ stops are based on the lowest note being "C", whereas 2 voice melodeons are (usually) MM and their (3rd button) start notes range from G below middle C to F above middle C.

So the melodeon mid voice is the one in which the first octave includes middle C.

Logged

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: The “naming of parts”
« Reply #10 on: December 26, 2022, 06:27:47 PM »

The lowest note on a PA isn't (usually) a C, either, though. The lowest C on a PA is conventionally read as a middle C (regardless of which reed banks are used to play it), but the lowest note will be the F below that on a full-size PA, or a G, B or the C itself on smaller instruments. I can see no logic whatsoever to equating a low reed bank to a 16ft organ pipe or a medium reed bank to an 8ft organ pipe, but logical or not, it's very commonly done!
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Mike Averill

  • suffering from MAD
  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 325
Re: The “naming of parts”
« Reply #11 on: December 26, 2022, 06:59:16 PM »

Thought we had decided on 'chinmost' and 'kneemost'  (:)

This is some what ambiguous as it depends on which side the player has the keyboard.
Logged
Hohner - 1 row 4 stop C and G, pokerwork DG, DoubleRay DC#, Corso CC#, Corona III ADG, CLUB X CF, Elysium II CF
Saltarelle 1 row 4 stop D, Castagnari Giordy DG, Sander DG
Sonola CC#, Walters DC#

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: The “naming of parts”
« Reply #12 on: December 26, 2022, 07:49:22 PM »

The only thing that bothers me slightly is "3rd button down from head end"; I would have said simply "3rd button from head (or chin!) end", as a) there is only one direction you can move from the end of the keyboard and b) "down" would mean to me "lower in pitch" rather than physically lower. I have the same kind of problem with online guitar tutorials that talk about the "top" string, which to me is the high "E", when they mean "furthest from the floor", which is the low "E" and therefore the bottom string, not the top one.  You can tell I'm at a bit of a loose end at present, can't you.......??
I quite " get" what you mean and your frustrations with regards "Top E " guitar string.
" Top E" was always Top E and everyone who knew and played guitar was aware if this.
What is so irritating is that those who have not understood this musical term, ( top end has always described the higher pitch notes) have somehow changed the world to believe differenttly.
Mutch the same as Grammar and spelling.
If you were to be an Australian guitarist then Top E would be a challenge.
However in order to get out of all this I notice that with electric guitar strings they merely give you the string thicknesses in thousandths of an inch.
Here we go again.......thought we had gone metric?
They keep changing things to be clever.
It was always easier to have a set of strings with the note name on the packet. Clearly the thickest string in the set will be Low E and the thinnest High E.
Logged

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: The “naming of parts”
« Reply #13 on: December 26, 2022, 10:28:59 PM »


  I have edited the initial post to reflect chin and feet directions. I see no problem with the few left-handers who plays melodeon upside down. They can work it out for themselves.  I am a left-hander incidentally, but play the instrument right-handed.

  The comment about right end notes being an octave or so higher than the left is not entirely true. I have 4th-button start on both of my instruments, and the right-hand L reeds are in the same octave as the basses on the other side.

   It is however true of M-voiced reeds which is another good reason to specify the ends in terms of M voicing? My ‘rodec’ machine readable melodeon descriptor system does that  “I want this button to be a bass note, not a chord” is indicated by using octave zero on the left. No Melodeon has reeds that low?
Logged
  _       _    _      _ 

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: The “naming of parts”
« Reply #14 on: December 28, 2022, 01:30:30 PM »

Thought we had decided on 'chinmost' and 'kneemost'  (:)

  As a retired teacher of English (note NOT "Emglish teacher", which would mean something entirely differe
Merry Christmas, all!

I.m glad I'm not the only one that steers towards the pedant on this.... :|glug
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: The “naming of parts”
« Reply #15 on: December 28, 2022, 06:11:54 PM »

Thought we had decided on 'chinmost' and 'kneemost'  (:)

  As a retired teacher of English (note NOT "Emglish teacher", which would mean something entirely differe
Merry Christmas, all!

I.m glad I'm not the only one that steers towards the pedant on this.... :|glug

We pedants have to stick together, Baz!
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: The “naming of parts”
« Reply #16 on: December 28, 2022, 07:04:13 PM »

Slightly off topic (or is it) but I was hoping someone would turn up with a version of the poem, but not about a rifle.  ;D

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: The “naming of parts”
« Reply #17 on: December 29, 2022, 07:22:44 AM »

A friend of mine did a punk rock cover of that poem.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: The “naming of parts”
« Reply #18 on: December 29, 2022, 10:27:49 AM »


   It’s a suite of 6 poems. But we digress …
Logged
  _       _    _      _ 

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: The “naming of parts”
« Reply #19 on: December 29, 2022, 10:44:28 AM »

Slightly off topic (or is it) but I was hoping someone would turn up with a version of the poem, but not about a rifle.  ;D

Ask and it shall be given: (:)

  Today we have naming of parts. Yesterday
  We had tonality .And tomorrow morning
  We shall have how to re- tape bellows. But today.
  Today we have naming of parts. The rain
 Falls softly on the morris team in the pub garden.
And today we have naming of parts.

 This is the lower strap bracket. And this
 Is the upper strap bracket, whose use you will see
When you are given your strap. And this is your second strap
Which in your case you have not got. The morris team
Hold in the garden their half empty pewter tankards
Which in our case we have not got.

This is the air button, always operated
With an easy flick of the thumb. And please do not let me
See anyone using the heel of their hand. You can do it quite easy
If you have any strength in your thumb. The musicians
 Stand waiting motionless, idly noodling whilst
Using the heel of their hands.

And these are the bellows. The purpose of these
Is to sound the reeds, as you can hear. We can move them
Rapidly in and out: we call this
Sounding the reeds. And rapidly inwards and outwards
The musicians are noodling whilst tapping their fingers
They call it sounding the reeds.

They call it sounding the reeds: it is perfectly easy
If you have any strength in your thumb: like the bellows,
And the strap , and the strap bracket, and the thumb strap,
Which in our case we have not got; and the musicians
Silent in the pub garden and the dancers going backwards and forwards,
For today we have naming of parts.
 :|glug
« Last Edit: December 29, 2022, 11:29:15 AM by baz parkes »
Logged
On the edge of Cheshire's Golden Triangle, apparently...
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal