Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: 1040 TUNING- GOT TO START SOMEWHERE  (Read 588 times)

0 Members and 1 Guest are viewing this topic.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
1040 TUNING- GOT TO START SOMEWHERE
« on: December 25, 2022, 10:43:07 PM »

After four years finally mapped the tuning on my 1040.
It is in need of some, ahem, *minor* adjustments. :|bl :|bl :|bl

What is a sensible target range to aim for, on the basis of even temperament - one reed bank at 0 and the other at +12 ?

And which would usually be the zero reed bank?

Are these collectively so far off that I would be better taking them all off and doing them individually on the tuning table?

Can anyone give an indication in cents as to what might be a likely variance between a reed on tuning table and in the box (recognising that this isn't an exact science)

Happy Christmas Everybody!

Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: 1040 TUNING- GOT TO START SOMEWHERE
« Reply #1 on: December 26, 2022, 01:31:28 AM »

Hi Peadar,
Here’s a target I used ( scavenged from a video posted on tuning) sorry!
I just pulled the target numbers / + plus cent  offsets from it, hopefully right. I have just recently tuned a box to this and it sounds good to me. Although a note the 7 button pull A note sounds off, I’ll be tweaking it more.
I did the bank closest to keyboard plus cents ( chart provided) and the other to pitch.
« Last Edit: December 26, 2022, 01:33:13 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: 1040 TUNING- GOT TO START SOMEWHERE
« Reply #2 on: December 26, 2022, 07:44:03 AM »

Thanks Boxcall,
That's a great starting point. :D

The other question is still open- is it better to take the reeds out of the box or retune with them in it?
« Last Edit: December 26, 2022, 01:53:07 PM by Peadar »
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 1040 TUNING- GOT TO START SOMEWHERE
« Reply #3 on: December 26, 2022, 02:08:21 PM »

It’s usually best with 1040 to take all the reeds out so you can replace the old wax.  If the reeds need cleaning or the valves aren’t perfect you can deal with that too.
If you check the reeds for pitch on your tuning rig you can adjust any that are badly out of tune. On my tuning table I usually do this pre-tuning to get the pitch approximation 10cents sharp of the target pitch.  Tuning tables do vary so it’s worth testing a few reeds on the table then compare with the pitch when they are waxed into the instrument. Final tuning is best done in the instrument once valving and waxing is completed.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal