Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Mics for bass end  (Read 1321 times)

0 Members and 1 Guest are viewing this topic.

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Mics for bass end
« on: December 31, 2022, 06:37:15 PM »

With the non-availability of Microvox items, I'm looking at alternatives to replace a Microvox M400 which is getting noisy. This is the small mic used for the bass end.
The Microvox kit uses electret contact mics and so I'm wondering whether an electret lapel mic would work if connected through a suitable plug to use the Microvox PSU.
Most of the wired electret lapel mics I've seen use either a mini jack or mini XLR to connect to a wireless bodypack.

(BTW Didn't someone used to make a bodypack which took two mini XLRs with balance controls to combine signals to output to a std XLR?)
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

David A

  • Good talker
  • **
  • Offline Offline
  • Posts: 98
  • Serenellini Lady D/G
Re: Mics for bass end
« Reply #1 on: December 31, 2022, 09:23:56 PM »

The t.bone L-pack from Thomann combines two XLR inputs into a single output. I use this with 2 t.bone Ovid system mics.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Mics for bass end
« Reply #2 on: January 01, 2023, 06:50:59 AM »

The t.bone L-pack from Thomann combines two XLR inputs into a single output. I use this with 2 t.bone Ovid system mics.

I've not tried the T-bone accordion system, but the T-bone recording mics I own are exeptionally good value -  clean, warm and natural-sounding - so I'd think it would be a good bet.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Mics for bass end
« Reply #3 on: January 01, 2023, 10:24:55 AM »

The t.bone L-pack from Thomann combines two XLR inputs into a single output. I use this with 2 t.bone Ovid system mics.
Thanks David, that's what I remembered but I couldn't find it on the Thomann site yesterday.
I was looking at possibly using the Ovid CC100 mics for my anglo but I need to work out how/where to attach them.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Mics for bass end
« Reply #4 on: January 01, 2023, 10:50:21 AM »

The Microvox kit uses electret contact mics and so I'm wondering whether an electret lapel mic would work if connected through a suitable plug to use the Microvox PSU.
It very likely would, as would a plain 2 terminal electret capsule wired to the plug that goes into the mic connector on the Microvox PSU and suitably mounted on the bass end wherever it sounds best. When I did it that way, I put the mic inside the bass cabinet but right next to a sound hole, acoustically equivalent to being on the outside pointing in though the sound hole. There was an RCA connector on the back of the bass cabinet to connect it electrically.

I think the Thomann Ovid clip-on mic (CC100 family or similar) suggested above offers a lot of flexibility though. I now use two of those with the included phantom power adapter. They have large clips, but I have used heavy duty self adhesive velcro on clip and box to attach them. It needs two mixer channels, but that's no problem in our usual band setup.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Mics for bass end
« Reply #5 on: January 01, 2023, 11:04:45 AM »

It needs two mixer channels, but that's no problem in our usual band setup.

And it can be better to allow the sound person to adjust your L and R balance because as the player you don't hear what the audience is hearing.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Mics for bass end
« Reply #6 on: January 01, 2023, 02:34:00 PM »

It needs two mixer channels, but that's no problem in our usual band setup.

And it can be better to allow the sound person to adjust your L and R balance because as the player you don't hear what the audience is hearing.

I would back this up 110% -- I've done the sound in the past for boxes with a combined output and it can be a nightmare. They set the balance to be "right" on a sound check, this may then not be "right" during the gig but you can't do anything about it. You also can't EQ the two ends separately, which is often essential especially with clip-on or close mics where the bass end may need some treble cut, or some midrange "honk" removing. You also can't set the balance in the foldback different to FOH, which is also often required to avoid lots of "bass end" on stage.

Even worse is when you want to lift the level of the box treble end in the mix a bit -- for example, when it's leading a tune and the rest of the band is making a lot of noise -- and you get the bass end coming up with it.

Please, please, *please* have the ability to keep them separate... ;-)

(you can always link them together if you want to where the occasion is suitable)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Mics for bass end
« Reply #7 on: January 01, 2023, 03:12:33 PM »

Absolutely spot on. When I was playing box in a band I had two completely independent mics; not only were there different levels and EQ in the front of house mix, but also in the foldback, essential for everyone in the band to hear what was going on.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal