Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Genuine Australian leather reed valves, pallet leathers from Kangaroo leather  (Read 612 times)

0 Members and 1 Guest are viewing this topic.

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204

G'day!
As you may have read, I am experimenting with Kangaroo leather valves and with great success.
I have since found the holy grail hidden drawer at the tanneries which hold veg tanned leathers dead flat in the drawer.
The Thicknesses I have discovered and am using so far are approx 0.025" and 0.045. which is perfect for trebles and basses.
I am currently re valving a Scandali 80 bass PA with them.
They are more stiff than floppy but still open and close
Enough for the reeds to sound.
They are holding flat very well.
They are very fine leathers as in "fine".
What I mean by that is that the outer of the leather is finer than Italian leathers and the inside which seals the vent is even smoother.
I have built a device which enables me to cut them to any width.
I quite enjoy cutting multiple valves and now have several boxes full of them.
If you are game to experiment and try new ideas I can send you some free samples to try if you can help me with the postage from Australia. Pm me.
If this takes off, I would like to hear on the forum what you think of them.
Meanwhile I would like to take some close up images and send them but the image sizes on the forum will be insufficient for one to inspect them critically .
I welcome advice on how I should go about this.
The leathers will be despatched attached to flat card. UC
Cheers
Peter
Logged

Geoffleft

  • Member
  • *
  • Offline Offline
  • Posts: 35

Hi Peter.
 I'm from OZ also and tinker by necessity on my own instruments.
Hope you don't mind my input re Kanga reed valves.
I tried this leather many years ago, thinking as you that it was beautiful fine leather that surely would work.
To this end I revalved an old Mezon three stopper that was in the 'too hard' box.
Result was not successful, despite the leather being really lovely to cut and glue.
It just wasn't soft enough and the air wasn't going to go through.
After that experience I didn't try Kangaroo again.
However an old friend and concertina maker, Ian Simpson (sadly no longer with us), used to swear by it for his concertina straps. He felt it lasted far longer than any cow hide. He may have tanned his own though.
It's something Ive been wanting to try on my Cajun accordion thumb straps.
Good luck though. You may succeed where I failed!
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal