Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Making slides and which materials to use  (Read 631 times)

0 Members and 1 Guest are viewing this topic.

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Making slides and which materials to use
« on: January 14, 2023, 03:59:19 AM »

So as to keep on topic and not thread drift, there seems to be some interest in the making if slides and indeed from which material.
Rees uses birch plywood, lester uses abs plastic and manufacturers sometimes use metal ( brass ) in the case of my old Scandali.
The Hohner Atlantic 3 pa I have has slides from a form of plastic almost like Bakalite which run in metal channels.
A very old Imperial 4 stop I had, had the slides made from wood and lasted 100 yrs or near on.
I guess there are no rules but here is the burning question?
Why do they make square holes in the reed blocks to match square holes for the slides on the base plate Oggy UGG when surely, using the correct drill bit round holes would be quicker?

Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Making slides and which materials to use
« Reply #1 on: January 14, 2023, 04:01:52 AM »

Sorry...do not know where Oggy ugg came from in my last post but it made me smile.
Godammned phone!
Logged

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Making slides and which materials to use
« Reply #2 on: January 14, 2023, 08:01:32 AM »

Using round holes, the centres need to be further apart so the closed position doesn't leak air at the edges.
This means the blocks have to be longer with spacers between the reeds made of thicker material.
I used slides from a Hohner Verdi. Very close spacing.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Making slides and which materials to use
« Reply #3 on: January 14, 2023, 09:02:48 AM »

...Why do they make square holes in the reed blocks to match square holes for the slides on the base plate Oggy UGG when surely, using the correct drill bit round holes would be quicker?

Don't they just use square hole drills?
[i.e., either rotary broaching or hollow square mortice drill]
« Last Edit: January 14, 2023, 12:38:39 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Making slides and which materials to use
« Reply #4 on: January 14, 2023, 09:03:18 AM »


   It’s about the spacial function. Without a slider … all air passages are open?

   The purpose of a slide is actually to close off sets of reeds, via their passages.
   It is the metal area between the openings that is functional, not the holes, if you see what I mean.
Logged
  _       _    _      _ 

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Making slides and which materials to use
« Reply #5 on: January 14, 2023, 09:51:52 AM »

Sorry...do not know where Oggy ugg came from

Probably Cornwall :|glug
Logged
On the edge of Cheshire's Golden Triangle, apparently...

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Making slides and which materials to use
« Reply #6 on: January 14, 2023, 12:16:31 PM »

A square hole allows more air flow than a round one.

Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal