Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: adjust button height and reduce "clacking" on Hohner Double Ray  (Read 976 times)

0 Members and 1 Guest are viewing this topic.

Brian J Morris

  • Member
  • *
  • Offline Offline
  • Posts: 17
  • Hohner Double Ray B/C, old Hohner C/F
adjust button height and reduce "clacking" on Hohner Double Ray
« on: January 18, 2023, 05:16:51 AM »

I've added a shim to reduce button travel by raising the bottom extent of the travel. Buttons no longer go deep into keyboard.

Next issues are button height and "clacking" noise from the pads at the end of the key lever, the ones that cover the airholes and lift when a button is depressed (there must be a name for them?).

Seems to me that if I augmented the padding with something a bit softer and thicker I'd reduce or remove the noise, and at the same time lower the button height. Does this make sense?
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: adjust button height and reduce "clacking" on Hohner Double Ray
« Reply #1 on: January 18, 2023, 07:39:05 AM »

Of course it makes sense!
CGM Music Services sells several types and thicknesses of pallet facings to do exactly what you want. But it's not as straightforward as it would seem at first glance. Replacing the facing with a thicker (I use his felt and Persian leather sandwich stuff) material will require you to remove the pallets from the levers so that you can fix them back on whilst they are in place, lying flat over the air vents which they are meant to seal. Mind you, I've never managed to silence the clacking altogether!
Also, as this (along with your shims) will reduce the button travel and height, you will need to make sure that the pallets are opening far enough to let enough air through to maintain a good volume from the reeds.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: adjust button height and reduce "clacking" on Hohner Double Ray
« Reply #2 on: January 18, 2023, 07:39:54 AM »

All you could possibly need to know

https://www.youtube.com/watch?v=g7nVDIXF3qc

Brian J Morris

  • Member
  • *
  • Offline Offline
  • Posts: 17
  • Hohner Double Ray B/C, old Hohner C/F
Re: adjust button height and reduce "clacking" on Hohner Double Ray
« Reply #3 on: January 18, 2023, 05:29:52 PM »

I decided the "clacking" isn't so bad and just reduced the button height by holding the pallet and pressing the corresponding button. So I think I'm ready to roll!

Thanks to all for the great suggestions and resources.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: adjust button height and reduce "clacking" on Hohner Double Ray
« Reply #4 on: January 18, 2023, 06:58:13 PM »

Clack and roll !   (:)
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal