Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Corso Reed Blocks  (Read 1391 times)

0 Members and 1 Guest are viewing this topic.

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Corso Reed Blocks
« on: January 18, 2023, 07:29:21 PM »

Hello
Does anyone know if the Treble Reed Blocks from a 1970's Corso ~(Black with Stradella Bass) are interchangeable with a 1950's red Corso.
Thanks in advance.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Corso Reed Blocks
« Reply #1 on: January 18, 2023, 08:08:03 PM »

They are probably the same size and shape, but there are two likely differences, the fixing screws,  the position of the gasket.  Older ones may have gasket on the blocks, later ones have gaskets on the fondo.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Corso Reed Blocks
« Reply #2 on: January 19, 2023, 10:41:32 AM »

Thank you very much. Similar to the Erica.
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Corso Reed Blocks
« Reply #3 on: January 20, 2023, 12:40:57 PM »

You should also make sure that the offset (distance from center hole to center hole) is the same.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Corso Reed Blocks
« Reply #4 on: March 29, 2024, 08:08:32 PM »

I'm just in the process of doing some Corso key conversions, and discovered that the blocks from a square-bodied Pre-Corso and the rounded-bodied 'modern' Corsos are the same but different.  The footprint is the same, meaning that the holes and hardware all line up and the blocks can be used interchangeably without modification, but there is a noticeable difference in the depth of the chambers.  The Pre-Corso chambers were shallower, and tapered/angled noticeably towards the top, whereas the later Corso blocks had deeper chambers and nearly vertical.  At least that's the case with the two examples I have in front of me.

I'm about to try the same reeds on each block to see if there is any noticeable difference.  I often wondered to what degree the depth of a chamber impacts the response and volume of a reed.
Logged
C#/D player
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal