Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Logos Embedded in Celluloid  (Read 964 times)

0 Members and 1 Guest are viewing this topic.

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Logos Embedded in Celluloid
« on: January 22, 2023, 05:01:58 AM »

I have been pondering for a while about the process of embedding a metal foil stamped logo into celluloid. This is a common thing in many accordions from the 40s all the way up to the 70s. I've documented lots of examples of the "paolo soprani" logo and it's many variations. There are a couple of things I'm wondering about though and I'm curious if anyone on here knows the answers:

- I assume the metal foil logos are pressed into softened celluloid sheets and applied to the accordions before polishing. But I'm wondering if anyone knows if there was a glue used?

- There must have been a machine that punched out these foil logos. I even noticed many customised logos for special models and different brands. One would think there were particular letter blocks an operator put into a punch and spelled out these custom logos. I recognise the same font from many of these logos. Does anyone know if this machine still exists and if the font set is still available? Is there a name / brand for the machine?

I'll put some picture examples here from various ads I've documented over the years. Would love to hear any info on these if anyone knows more. Thanks.
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Logos Embedded in Celluloid
« Reply #1 on: January 22, 2023, 05:02:28 AM »

more logos:
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/

IanK

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
Re: Logos Embedded in Celluloid
« Reply #2 on: June 12, 2025, 08:27:22 PM »

I wondered if anyone has had success in making up replacement name badges/logos like these examples from Chris  - maybe using scans/laser cutting?
Logged

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Logos Embedded in Celluloid
« Reply #3 on: June 12, 2025, 09:02:19 PM »

I for one is absolutely sure that they're added after the celluloid is applied to the box, as the sheets are stretched onto the box and would be scraped/sanded and polished before the logos were added. I also wonder about the process. Acetone? Heat? Brute force? They're fairly easy to pry out, and I've had luck transferring one from a box to another, suggesting they were staped on the same die - with interchangeable letters I'd suspect tiny clues, and I've yet to see any. I for one think it must be a solid die for each logo.
Logged

Disparate Dan

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 329
Re: Logos Embedded in Celluloid
« Reply #4 on: June 13, 2025, 07:01:43 AM »

Don't know for sure about melodeons, but in the 1960s a lot of branding on plastics was done by hot foil stamping.  An electrically-heated one-piece die pressed metallic tape into the plastic for a moment or two. Temperature, pressure and time were controlled by the machine by which this was done.  The foil (usually gold or silver-coloured)came on a roll which automatically advanced as the die was raised.   
Logged
We're all doomed ...

odonovanchris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 276
    • Instagram Accordion Profile: chris0donovan
Re: Logos Embedded in Celluloid
« Reply #5 on: June 13, 2025, 10:02:18 PM »

The hot foil method is used a lot on woodwind instruments. For example there's a video of the Buffet Crampon factory in France where they use one of these machines to impress the logo on clarinets. This is a different process than what I believe the old accordion makers did.

I agree with Lars that the logos were added to the box during the celluloid process. The accordions would have been wrapped in the usual way but the small strip in the front where the logo is would be added last. Note that there are usually 2 seams on the front of vintage Paolos where the logo is placed. I think the stamped foil logo would be clamped into the still soft celluloid and left to dry, then the scraping/polishing process would be done to give an overall smooth finish which we observe on the vintage boxes.

I believe the mass-produced Paolo Soprani logos were stamped out of thin aluminium sheet using a custom die. But the one-off logos were cut with a scroll saw - this is evident on the letters "a" and "e" where the hole inside had to be cut out. You can see the little line where the blade goes through. Very labour intensive. Nowadays it would be very simple to laser cut the logos (one of my long list of to-dos).

Pro tip- if you want to transfer one of these old logos from a junk box to another; don't pry them off - they're too fragile. The best way is to remove the celluloid and logo in one piece then drop it into a jar of acetone. The acetone will dissolve the celluloid away and you will be left with a perfect unbent logo.
Logged
See my accordion projects on Instagram: https://www.instagram.com/chris0donovan/
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal