Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Castagnari studio reed noise - scratching  (Read 2070 times)

0 Members and 1 Guest are viewing this topic.

Mark Brown

  • Member
  • *
  • Offline Offline
  • Posts: 10
Castagnari studio reed noise - scratching
« on: January 30, 2023, 12:13:19 AM »

Hi,

I am hoping someone may be able to help me figure out what’s going on with my box.

Castagnari studio in BC - my first 4 buttons have a pretty annoying scratching noise when transitioning between notes.

I am guessing it’s due to valves not quite staying closed. 

Any one with more experience than me (I’m sure that is everyone here) able to confirm that and if so offer a good solution?

I’ve tried searching the archives but couldn’t come up with anything.

Link to video
https://youtube.com/shorts/33Edv3_bjJU?feature=share

Photo of reeds in question.

All have leather and my lowest note has a plastic booster (I’m sure that’s a technical term)

Any and all help is greatly appreciated.
Logged

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Castagnari studio reed noise - scratching
« Reply #1 on: January 30, 2023, 01:37:39 AM »

Valves look okay in the photo but only show 1/4 of the valves for each note/ button, there are inside valves and valves on the opposite side we can’t see.
More experienced will be along, I’d just be guessing. I think low notes are more prone to this effect.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Mark Brown

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Castagnari studio reed noise - scratching
« Reply #2 on: January 30, 2023, 01:44:34 AM »

Thanks for the reply.

All the valve are new (box is pretty much new) and as stated you are correct in that I only get that scratching noise with my first 4 low notes.

I posted a pic of the reeds that are in question.

I have another box and I don’t hear this effect. my other box is also a wetter of a tune so it may be covering it up.

You can’t hear it across the room but it’s quite annoying while playing.

Not sure if a better leather or possible replacement would help?

Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Castagnari studio reed noise - scratching
« Reply #3 on: January 30, 2023, 03:02:50 AM »

To me, it does sound like valves are not sealing firmly and quietly.  They are bouncing a bit and creating buzz.  This can happen with stiff material like synthetic leather or vinyl, or with leather that is too dry or old, or has been subjected to heat.  The leather should be supple enough that when that first bit of suction pulls it against the plate, it seals quickly and quietly, and stays put.  Ordinarily I'd suspect the boosters, but since only one of the offending notes has one, I suspect the valve material itself.

It is a lot easier to diagnose this kind of issue with a tuning table / tuning bellows.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Mark Brown

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Castagnari studio reed noise - scratching
« Reply #4 on: January 30, 2023, 03:26:38 AM »

To me, it does sound like valves are not sealing firmly and quietly.  They are bouncing a bit and creating buzz.  This can happen with stiff material like synthetic leather or vinyl, or with leather that is too dry or old, or has been subjected to heat.  The leather should be supple enough that when that first bit of suction pulls it against the plate, it seals quickly and quietly, and stays put.  Ordinarily I'd suspect the boosters, but since only one of the offending notes has one, I suspect the valve material itself.

It is a lot easier to diagnose this kind of issue with a tuning table / tuning bellows.

It is new leather but being an entry model I suspect the leather is probably synthetic.

I may try a little leather conditioner and see if that changes anything.

If not, I will replace those valves that make noise.

Any suggestions as to a good source for quality leather valves?
Logged

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Castagnari studio reed noise - scratching
« Reply #5 on: January 30, 2023, 07:49:28 AM »

Hi.
If the box is new it should be under warranty
Contact who ever you bought it from and tell them that you are not happy.

If my customers aren't happy I arrange collection and it goes to one of my tuners to be checked at fixed if required

24 months warranty subject to conditions on new instruments bought from Acorn Instruments,12 months on pre owned..
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Castagnari studio reed noise - scratching
« Reply #6 on: January 30, 2023, 07:57:17 AM »

It is new leather but being an entry model I suspect the leather is probably synthetic.

I may try a little leather conditioner and see if that changes anything.

If not, I will replace those valves that make noise.

Any suggestions as to a good source for quality leather valves?


It looks like the valves are real thin leather with plastic on top. But I would warn against trying to use leather conditioner on the valves - you can get into a real can of worms as the valves can get sticky against the reed plate, just a dab in the wrong place and your reed will have a coating at a critical point, and the plastic booster needs to move freely against the (dry, un-conditioned) leather valves to move correctly.

I don't know if you're used to waxing and tuning, but in order to remove and replace the valves on the inside of the reed, they have to be removed from the blocks - and waxed in place after new valves are installed. You should consider that the notes may change slightly in tuning after changing the valve type - on a dry'ish tuned box like yours, a small change may be enough that you'd want/need to have the notes tuned afterwards. If a slightly chattering valve annoys you, it's likely that the change in tuning may also annoy you enough to consider having the tuning adjusted.

You can buy leather valves on eBay, or ask the usually very helpful Charlie at cgmmusical.co.uk
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari studio reed noise - scratching
« Reply #7 on: January 30, 2023, 08:46:03 AM »

There is almost always some valve noise on low notes, and it is at its worst if you hold down a button while changing bellows direction.  Are you aware of the noise when playing normally?
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari studio reed noise - scratching
« Reply #8 on: January 30, 2023, 08:47:57 AM »

And take not or Pete's comment about going to your supplier.   If you make any attempt to rectify this yourself you are likely to invalidate any warranty.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pearse Rossa

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 723
Re: Castagnari studio reed noise - scratching
« Reply #9 on: January 30, 2023, 09:30:57 AM »

in order to remove and replace the valves on the inside of the reed, they have to be removed from the blocks
Not necessarily. Underside valves can be replaced without removing the reed, but it's not
something a novice should attempt.
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Castagnari studio reed noise - scratching
« Reply #10 on: January 30, 2023, 01:11:58 PM »

I would actually call that ‘normal’ valve noise on those lowest notes. As Theo mentioned, there is almost always some valve noise when changing bellows direction on the lowest notes of a box (even more so if the valves are plastic). You can try having someone replace with different, heavier valves (boosted) but you may be chasing a problem that will be difficult to eliminate entirely. And as others have said, if it’s new, take any issues you have up with the dealer you bought it from.
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Castagnari studio reed noise - scratching
« Reply #11 on: January 30, 2023, 01:16:17 PM »

Couldn't listen to the video earlier.  I've played it now and it sounds normal to me.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Castagnari studio reed noise - scratching
« Reply #12 on: January 30, 2023, 04:54:53 PM »

In my opinion, some of the notes are within what I would call a normal or acceptable range of buzz, but some would certainly bother me.  The Ab/Eb in particular is very crackly.  Is that the note with the plastic booster?  I compared with my instruments and cannot reproduce that amount of chattering or crackle except when plastic is involved...
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Castagnari studio reed noise - scratching
« Reply #13 on: January 30, 2023, 10:38:27 PM »

On the other hand, this Ab/Eb is at the very low end of the B row so probably not used too often, and even less frequently in in-and-out mode.

Playing these low notes more staccato should help reduce the valve noise.
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Castagnari studio reed noise - scratching
« Reply #14 on: January 31, 2023, 01:12:24 AM »

The inside valves are not visible without removing the reed blocks.
I have found that although they look OK, they can often snag against the inside of the chamber causing them to be slow in closing.
 When I am fitting inner valves I try to place them as close to the reed as possible(without fouling it) & therefor away from the edge and front of the reed chamber. (Trim valve if needed)
These noises are more noticable when you first pick up the box after a long break - once you get going again and play a few tunes you become less consious of the noise and "tune" it out.
Playing the bass usually drowns it out anyway. Good luck!
Logged

Mark Brown

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Castagnari studio reed noise - scratching
« Reply #15 on: January 31, 2023, 01:25:57 AM »

Thank you all for your very informative replies!!!

The box is not brand new, about a year old.

As for the noise being pretty standard, I have only played one other box that didn’t have much noticeable noise as it was probably drowned out by the wetter tune.

One the note is played it goes away and is only there for a split second at the transition on the bellows in and out.

It is minor but yeah, kind of annoying.

Once it’s due for a tune up, I will see what I can do to sort it out a bit better than it is now.


Logged

Mark Brown

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Castagnari studio reed noise - scratching
« Reply #16 on: February 08, 2023, 12:26:47 AM »

Well I swapped this box for an Irish Bouebe.

Construction and quality is just about the same. A few minor things seem nicer on the castagnari vs the saltarelle and vise versa.

Side by side info for anyone debating one or the other.

I personally like the saltarelle better. Bellows action is a bit smoother/quicker and the buttons are a better suite.

As for the scratching, it’s still slightly there on the saltarelle but the little wetter tune pretty much completely masks it when playing.

Everything I’ve read about saltarelle is they seem to be quite hit or miss. I was very hesitant to make the swap without playing it but I’m quite happy with the swap.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Castagnari studio reed noise - scratching
« Reply #17 on: February 08, 2023, 08:44:41 AM »

Just curious. Do you play quietly or with more vigour? I generally go at it aggressively and valve noise is something I only notice when playing quietly. People's style of playing varies greatly and i do get enquiries about odd noises, often (but not always) explained when I discover the playing style.

Mark Brown

  • Member
  • *
  • Offline Offline
  • Posts: 10
Re: Castagnari studio reed noise - scratching
« Reply #18 on: February 08, 2023, 10:19:33 PM »

I’d say I am probably middle of the road.

I am usually playing out in my shed so I can be as loud as I want but often I’m trying to work things out so I’m not belting a tune.

I can also say that I am very much still learning so I am often quite focused on the tune. How the notes sound and that they are being played correctly vs how I’m guessing a more seasoned player would almost feel the tune and not really be thinking too much about it.

Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal