Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Converting B/C to A/D  (Read 904 times)

0 Members and 1 Guest are viewing this topic.

Joe Murray

  • Member
  • *
  • Offline Offline
  • Posts: 8
Converting B/C to A/D
« on: February 20, 2023, 01:04:21 PM »

I have a Hohner Double Ray Black dot box in BC which has a nice action and sound. I need to tune it as some of the notes have drifted.
I would really like an AD box to fill a gap in my collection. It occurred to me that by raising the C row a full tone and lowering the B row a full tone, I could fully utilise the box. I have tuned a few boxes to my satisfaction, but would welcome advice/opinion from experienced fettlers.

Do you think this is feasible? Is it advisable? I have dropped/ raised isolated reeds a tone before, but is this likely to weaken them too much?.

Advice welcome.

Thanks
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Converting B/C to A/D
« Reply #1 on: February 20, 2023, 01:07:32 PM »

No big deal with the lower notes, but getting more and more problematic the higher up you get.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting B/C to A/D
« Reply #2 on: February 20, 2023, 02:43:46 PM »

Much better to swap the reed blocks, or even trade your BC box for an AD. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Converting B/C to A/D
« Reply #3 on: February 20, 2023, 02:55:50 PM »

Just a thought: you could also sell the BC box and get an AD one, or sell/swap the reeds.

(oops Theo beat me to it ! ) (:)
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Converting B/C to A/D
« Reply #4 on: February 20, 2023, 03:14:39 PM »

Swap blocks/reeds or sell/trade the box. You’ll have no trouble selling one in B/C and finding one in A/D.
Logged
C#/D player

Joe Murray

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: Converting B/C to A/D
« Reply #5 on: February 20, 2023, 04:12:35 PM »

Thanks to Theo and others for responses.

I have considered swapping out reed blocks (CGM has A/D set for about £225). May eventually go that route but  budget tight at present. Also, I like the box so would rather hang on to it rather than sell/swap it.  Just wondered if there are any serious pitfalls (apart from time and effort) in altering both rows by a full tone.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Converting B/C to A/D
« Reply #6 on: February 20, 2023, 05:07:12 PM »

Yes there are pitfalls.  If you have to ask the question i assume that means you don’t have experience doing reed work.  Tuning up from C to D will result in reeds that are extremely thin at the tips, this can make them unstable in pitch, reduce the dynamic range and leave them prone to breakage. Tuning down a while tone by weighting the reed tips is less hazardous,  but may impair the responsiveness and could dull the sound a little.
If you ask an experienced tuner to do this they may refuse to do it or it could easily end up costing as much as buying a set of AD blocks and selling the BC blocks.
« Last Edit: February 20, 2023, 05:08:57 PM by theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Converting B/C to A/D
« Reply #7 on: February 20, 2023, 06:01:11 PM »

If you insist on going the retune road, it would probably be better to shift the reedplates by one position and use the B ones for your D row (and the Cs for your A).  Done this way, most notes would require no shift at all or only a semitone.
Logged

Joe Murray

  • Member
  • *
  • Offline Offline
  • Posts: 8
Re: Converting B/C to A/D
« Reply #8 on: February 20, 2023, 07:37:08 PM »

Thanks Theo and Tirpous.

I do have some experience of reed work retuning a number of older boxes from A 435 to A 440 and retuning reeds on other boxes which had drifted out of tune. Obviously, raising/lowering reeds a whole tone is a heavier intervention.  I have done it successfully on several occasions without any ill effects - mainly reconfiguring bass reeds. However, doing this across the full range of reeds in a block is, I think, a different matter - hence my request for advice.

Thank you Theo for crystallising the basic issues so clearly.

Thank you for your suggestion, Tirpous. I will examine further these configurations to see just how much this might minimise the need to alter the total number of reeds, should I proceed with re-tuning.

Anyway - food for thought - so thank you both for that.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal