Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: 3D Printed Parts  (Read 620 times)

0 Members and 1 Guest are viewing this topic.

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
3D Printed Parts
« on: March 01, 2023, 07:18:46 PM »

Hi Guys/Gals got a few 3D printed parts back from my mate

The little joints (1mm slot)are to avoid either loop bending rods or convert steel strips to rods (Like Club 2)
Not sure how they will wear with time but my tests with a split pin fishing leader and some old weights they seem very strong
I flux strip welding rods and the buttons and little joint holes are a great push in snug fit

Just waiting for an experimental test fondo with coupler slides/stops inside the fondo .
I has some reservations but I think with the precision that these things print it will be fine and 4 buttons sprung basically a copy of a chromatic harmonica
slide button but with a stop latch

Now to draw the reed blocks, but the good thing is once its in the cad programme you can just change the length to accommodate
different keys and spacing

As to printing frames I,m still a bit of a traditionalist ,and not sure about buttons or button plates or anything visible being 3Dprinted
I will see what they look like and should be very light as you can change from solid (bellows pins edge and front edge)to lattice? printing
like honeycomb

I will post pics if anyone's interest as the bits arrive 

   
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 3D Printed Parts
« Reply #1 on: March 01, 2023, 08:27:28 PM »

Don’t worry about the look of external parts. Have a browse round this website
http://edwardjay.net/paragraphsview.aspx?siteid=61&headerid=85&siteHeader=Home
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Garry Probert

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 296
Re: 3D Printed Parts
« Reply #2 on: March 01, 2023, 09:12:17 PM »

Theo ...oh dear   ;) wood infused PLA thats gives one food for thought ..I,m looking on the Filament site now LOL
Thanks for the link will get some ordered they look great.


The trouble with 3D printers:I hate them but love what they can do  (:)
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal