Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed scratcher for reed tip?  (Read 826 times)

0 Members and 1 Guest are viewing this topic.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Reed scratcher for reed tip?
« on: March 05, 2023, 09:00:46 AM »

Hi, I know most people use scratchers to tune reeds down towards the rivet end, but why are scratchers not used at the tip to tune the reed up in pitch? Thanks
Logged
Dancing about architecture since 1997

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Reed scratcher for reed tip?
« Reply #1 on: March 05, 2023, 10:24:33 AM »

They are. At least those that have two differently shaped ends.
https://www.youtube.com/watch?v=rdap-lYsKbw&ab_channel=diatonix2  (3:02)
« Last Edit: March 05, 2023, 10:28:57 AM by diatonix »
Logged

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Reed scratcher for reed tip?
« Reply #2 on: March 05, 2023, 02:10:18 PM »

Thanks for sharing that video, it’s great and very informative! I now have a bank of reeds tuned up and very pleased with results so far (except random bits of debris keep getting into different reeds and making them sound strange but I’m guessing with time this will settle down…)
Logged
Dancing about architecture since 1997

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Reed scratcher for reed tip?
« Reply #3 on: March 05, 2023, 03:37:53 PM »

If you are finally getting to grips with reed tuning then learning to wax reed plates in will be rather less challenging. Not simple to get good results without a fair bit of practice but technically far easier and easily reversible (getting wax all over the valves is a different matter, it will happen believe me!).
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Reed scratcher for reed tip?
« Reply #4 on: March 05, 2023, 05:32:22 PM »

I waxed in the reedplates using a tjanting tool as used for batik, after melting wax in a jug in the oven at 140c. I then touched up with a soldering iron, which isn’t variable, so I switched it on and waited for it to be just hot enough to make the wet sponge sizzle before switching it back off, and then it worked nicely without smoke. Quite happy with result, minimal amount of wax. Next time should be better. Trick is I think to keep bowl of tjanting tool full so nozzle doesn’t cool down too quickly…
Logged
Dancing about architecture since 1997

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Reed scratcher for reed tip?
« Reply #5 on: March 05, 2023, 10:46:44 PM »

Excessively cautious but whatever floats your boat I guess. I use Charlie Marshall’s Italian reed wax melted in a £20 electrically heated pot intended for beauty salon leg waxing. It only works because nobody has told it that it is melting reed wax . . .
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Reed scratcher for reed tip?
« Reply #6 on: March 06, 2023, 07:31:13 AM »

Which part is excessively cautious?..
Logged
Dancing about architecture since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal