Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: How to Cajun a Hohner 4 stop?  (Read 5349 times)

0 Members and 1 Guest are viewing this topic.

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
How to Cajun a Hohner 4 stop?
« on: March 11, 2023, 10:07:02 AM »

Today I managed to get hold
of a Hohner 4 stop.
When they talk about Cajun tuning what exactly are we talking about?
Is it merely dry tuning the whole box including bass?
Are the notes the same pitch as standard?
Now that I can tune a box I cannot wait to get at it but just need a few tips from the experts if you would be so kind.
Thanks
Peter it
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: How to Cajun a Hohner 4 stop?
« Reply #1 on: March 11, 2023, 11:23:32 AM »

Usually its dry tuned (no tremelo) and minus -15 on the 3rds and 7ths. So if its in C you would take 15 cents off all the E's and B's. You would also take everything else to A440 which on a hohner generally means tuning every single reed unless you are lucky and find some already in tune. In addition some tuners raise the 4th's ...some do / some dont but if they do +10 is a good place to start. One you've done all that you can tune all the bass notes and chords and on the chords take the thirds to - 15. So on the C chord flatten the E and on the G chord flatten the B. On the ones ive done ive also added a bass end with buttons instead of spoons and built a wooden fingerboard. The bass end does seem to create a smoother tone. The fingerboard ive come up with has a removeable back which makes it possible to limit the button action and has more space between the buttons and fingerboard edge than the regular hohner design to make it feel more like a "louisiana" box. You might find it easier on the high reeds to take them out of the box to get them someone near......especially on the tremelo reeds which have to come down quite a bit. The low E's and B's will come down to -15 but it can take a while. if the wax is past its sell by date you can take out all the reeds and do a rewax (in which case you might as well give them a clean and revalve and do some pretuning out of the box before a final tuning after rewaxing) However rewaxing a 114 isnt the easiest of tasks.
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: How to Cajun a Hohner 4 stop?
« Reply #2 on: March 11, 2023, 08:52:44 PM »

Usually its dry tuned (no tremelo) and minus -15 on the 3rds and 7ths. So if its in C you would take 15 cents off all the E's and B's. You would also take everything else to A440 which on a hohner generally means tuning every single reed unless you are lucky and find some already in tune. In addition some tuners raise the 4th's ...some do / some dont but if they do +10 is a good place to start. One you've done all that you can tune all the bass notes and chords and on the chords take the thirds to - 15. So on the C chord flatten the E and on the G chord flatten the B. On the ones ive done ive also added a bass end with buttons instead of spoons and built a wooden fingerboard. The bass end does seem to create a smoother tone. The fingerboard ive come up with has a removeable back which makes it possible to limit the button action and has more space between the buttons and fingerboard edge than the regular hohner design to make it feel more like a "louisiana" box. You might find it easier on the high reeds to take them out of the box to get them someone near......especially on the tremelo reeds which have to come down quite a bit. The low E's and B's will come down to -15 but it can take a while. if the wax is past its sell by date you can take out all the reeds and do a rewax (in which case you might as well give them a clean and revalve and do some pretuning out of the box before a final tuning after rewaxing) However rewaxing a 114 isnt the easiest of tasks.
Chris.
I very much appreciate this as The Hohner 4 stop is the closest I am going to get for a cajun type sound.
These boxes are going for high prices now but I saw one on FB going substantially under price so I grabbed it.
I am assuming it to be out of tune and in need of re valving anyway.
If possible I would appreciate a few photos of your new fingerboard  and bass button mod?
Thanks.
Pete
Logged

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: How to Cajun a Hohner 4 stop?
« Reply #3 on: March 11, 2023, 10:02:20 PM »

if its ready for a revalve you are looking at removing all the reeds anyway. I clean mine in acetone. you can use cotton buds after they've had a good soak. If they are rusty there is advice on here about cleaning off the rust. I dry mine on paper towel on top of a radiator after rinsing in water. Low reeds will work better with leather valves. Again its all on here if you keep searching. Now waxing a 114 isnt easy, especially the middle blocks. Ive found its best to do alternate reeds on each block but im sure everyone has their preferred approach. I'll try and post pics of bass end and fingerboard but it may be a few days as im in the recording studio for a few days. having all the reeds out will actually make all the retuning easier but obviously fine tuning has to be done after waxing. I like to pretune slightly sharp as i find it easier to flatten reeds especially on the pull reeds.
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: How to Cajun a Hohner 4 stop?
« Reply #4 on: March 11, 2023, 11:20:58 PM »

if its ready for a revalve you are looking at removing all the reeds anyway. I clean mine in acetone. you can use cotton buds after they've had a good soak. If they are rusty there is advice on here about cleaning off the rust. I dry mine on paper towel on top of a radiator after rinsing in water. Low reeds will work better with leather valves. Again its all on here if you keep searching. Now waxing a 114 isnt easy, especially the middle blocks. Ive found its best to do alternate reeds on each block but im sure everyone has their preferred approach. I'll try and post pics of bass end and fingerboard but it may be a few days as im in the recording studio for a few days. having all the reeds out will actually make all the retuning easier but obviously fine tuning has to be done after waxing. I like to pretune slightly sharp as i find it easier to flatten reeds especially on the pull reeds.
Really appreciate the advice Chris.
I will heed what you have written.
I use a sodering iron for rewaxing so hopefully that will help overcome difficulties.
I look forward to the pictures if and when you find time.
Thanks
Pete
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: How to Cajun a Hohner 4 stop?
« Reply #5 on: March 12, 2023, 07:17:28 AM »

I find the best method for rewaxing the reeds in a 114 is, with the reed plate out of the box, to apply a bead of wax on the bottom of the reed and then quickly slide the reed into position, I then wax along the top of the reed. Once all the reeds are in place on a block held by the top and bottom waxing I use gravity to flow wax down the sides of the reeds between the plates.

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: How to Cajun a Hohner 4 stop?
« Reply #6 on: March 12, 2023, 10:42:56 AM »

I use a sodering iron for rewaxing...

Do you use a temperature controlled iron?
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: How to Cajun a Hohner 4 stop?
« Reply #7 on: March 12, 2023, 08:53:33 PM »

I use a sodering iron for rewaxing...

Do you use a temperature controlled iron?
No. Just a standard iron with a flat tip supplied by Charlie Marshal.⁵
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: How to Cajun a Hohner 4 stop?
« Reply #8 on: March 12, 2023, 08:56:47 PM »

I find the best method for rewaxing the reeds in a 114 is, with the reed plate out of the box, to apply a bead of wax on the bottom of the reed and then quickly slide the reed into position, I then wax along the top of the reed. Once all the reeds are in place on a block held by the top and bottom waxing I use gravity to flow wax down the sides of the reeds between the plates.
Thanks Lester.
Its still in the post to me so I have not looked inside yet so do not know what I am in for.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: How to Cajun a Hohner 4 stop?
« Reply #9 on: March 12, 2023, 10:46:00 PM »

I use a sodering iron for rewaxing...

Do you use a temperature controlled iron?
It gives you a lot more control

It's worth thinking about. Makes life a lot easier.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: How to Cajun a Hohner 4 stop?
« Reply #10 on: March 13, 2023, 08:21:15 PM »

I use a sodering iron for rewaxing...

Do you use a temperature controlled iron?
It gives you a lot more control

It's worth thinking about. Makes life a lot easier.

You have a very good point. I will get one.
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: How to Cajun a Hohner 4 stop?
« Reply #11 on: March 16, 2023, 09:19:01 AM »

The Hohner 4 stop arrived today.
Considering these little four stops can go for quite high prices now I consider myself lucky to get it for the  price I paid.
I see what you mean now about removing and rewaxing the reeds into their blocks.
The reeds and leathers ( ventilli) are in surprisingly good nick.
I am more than happy with it.
Right Hohner!.( I hate you!!!!)...why the B hell have you glued the reed blocks to the base plate?
How the heck are we supposed to retune these things?
"Na Ja!!!......vee Haf done dieses so ven you haf difficulties it ees Wery seemple.
You only haf to buy a new Accordion!!!"
" Ach  Ja Ich verstehe es aber trotzdem ein bischen Dumb oder?"
translation....( sorry I was married to a German lady )
Oh yes I see....I understand  but that was a bit stupid?    ( Glueing the reed blocks in).
Oh well... now what?
This is crazyness.
What is the sane option to retune it?
Hohner I have a love hate relationship with you.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: How to Cajun a Hohner 4 stop?
« Reply #12 on: March 16, 2023, 09:33:53 AM »

Tuning reeds in situ is something you can learn.  It requires only sone very simple tools in addition to small files and scratcher. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: How to Cajun a Hohner 4 stop?
« Reply #13 on: March 16, 2023, 10:51:37 AM »

I have read that Hohner glued in the blocks because it makes them sound louder. I've never tested the idea.
I have read of nightmare experiences happening to those who knew better and cut out the blocks, rather than work in situ. I've not tried that either.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: How to Cajun a Hohner 4 stop?
« Reply #14 on: March 16, 2023, 11:21:09 AM »

I have read that Hohner glued in the blocks because it makes them sound louder. I've never tested the idea.
I have read of nightmare experiences happening to those who knew better and cut out the blocks, rather than work in situ. I've not tried that either.
911 my
Acoustically...yes I get that.
The reed blocks glued to the baseboard to directly transfer the vibrations.
But then why did They deviate, make the soul of the reed block from cardboard, coat it with leather for a seal and make them removable.( A la Hohner Atlantic 3 120 bass)
That was the opposite of creating a direct vibrational bond.
Almost like putting a layer of felt or leather under a guitar bridge.
I do not think that Hohner thought that the H114 was to be a serious box but an extension of the harmonica with quite a bit more woof and they simply waxed the reeds on the blocks, glued em in and boxed them for shipping.
Little did they know that in later years ( like now) how much they are appreciated.
It was quick and simple.
Glue them in and get em shipped.
Ah well...tis what it is no matter the moan.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: How to Cajun a Hohner 4 stop?
« Reply #15 on: March 16, 2023, 12:20:09 PM »

...Ah well...tis what it is no matter the moan.

 Sure enough, it is but, to me, they are still a thing of charm. Nothing else quite like them.

You're not the first to notice this. This discussion, from another time and another place, might be of interest:
https://rec.music.makers.squeezebox.narkive.com/yLO8EAU3/removing-ha-113-reedblocks-and-related-issues
« Last Edit: March 16, 2023, 01:29:09 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

chris hall

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 245
Re: How to Cajun a Hohner 4 stop?
« Reply #16 on: March 16, 2023, 12:48:08 PM »

dont try and remove the blocks. chances are you'll create damage to the blocks and the faceplate /fondo, If the wax and valves look sound just get tuning...even those low reeds that could be over 20 cents sharp can be brought down to minus 15 with some patience. Make sure your scraper is sharp and sharpen it regularly as you go....that makes a big difference. Start on the lower reeds. By the time you get to the higher more delicate reeds you should be starting to get a feel for it. It can all be done in the box. If the valves start to fall off as you are tuning its a sign that although you thought everything was going to be simple its not quite so.
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: How to Cajun a Hohner 4 stop?
« Reply #17 on: March 16, 2023, 12:54:06 PM »

The reed blocks glued to the baseboard to directly transfer the vibrations.
But then why did They deviate, make the soul of the reed block from cardboard, coat it with leather for a seal and make them removable.( A la Hohner Atlantic 3 120 bass)
That was the opposite of creating a direct vibrational bond.
Almost like putting a layer of felt or leather under a guitar bridge.

No, the purpose of of either glueing or putting a leather seal is in both cases to make sure air does not leak between reed block and board. Vibrations do not have to be transmitted to the flat board, even though it's sometimes misleadingly named a soundboard. That isn't how the sound is made. The sound is made directly in the air by the reed chopping the air flow though it.
Glueing also has the advantage of solidly anchoring the reed block to something rigid, making it effectively stiffer and heavier, to actually reduce block vibration, which can improve reed response and clarity of sound. So it might subjectively sound louder, but not though the mechanism you are suggesting.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: How to Cajun a Hohner 4 stop?
« Reply #18 on: March 16, 2023, 01:17:14 PM »

It's not like a guitar or violin. It doesn't have a soundboard. The sound is made by the flow of air through the reeds.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: How to Cajun a Hohner 4 stop?
« Reply #19 on: March 16, 2023, 02:54:36 PM »

...Ah well...tis what it is no matter the moan.

 Sure enough, it is but, to me, they are still a thing of charm. Nothing else quite like them.

You're not the first to notice this. This discussion, from another time and another place, might be of interest:
https://rec.music.makers.squeezebox.narkive.com/yLO8EAU3/removing-ha-113-reedblocks-and-related-issues

Great link. Thank you

Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal