Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Fixing up a Frontalini  (Read 1426 times)

0 Members and 1 Guest are viewing this topic.

seltzerplease

  • Member
  • *
  • Offline Offline
  • Posts: 5
Fixing up a Frontalini
« on: March 22, 2023, 07:10:19 PM »

Hi everyone— I’m posting because I’d like some advice on fixing up this box I’m working on, and I know a lot of you will have useful insights. I've attached some photos to make up for any deficits in my descriptions!

The instrument is a GC 21 treble 8 bass Frontalini. The body and bellows are in good shape overall, and after some cleaning and airing out, they actually smell pretty good, too. There are some issues, though— the keyboard, the air button, and whether or not (and if so, how best) to re-felt the pallets and the fondo. I’m aware that this isn’t going to magically turn into a top-class instrument, but I’d like to get it playing as well as it can and learn some things in the process.

1. KEYBOARD— There was quite a bit of gunk— dust and bug shells and who knows what— in the treble mechanism that I wanted to clean out. In the process of removing the mechanism, I stripped one of the screws, but I can replace it. I noticed upon removal that the strip of wood the mechanics sit on was split near the holes. The screws are lengthy enough to pass through (it’s about 6mm thick), but I wanted to know if, for stability’s sake, it was prudent to replace it somehow. It’s nailed in and glued, so not going anywhere without a fight.
   The other thing is that I’d like to restrict the treble action. Unlike the Pokerworks and Presswoods that I’ve worked on previously, the keyboard is fixed to the body— I can’t just take out the screws and take it off. I didn’t measure how high the arms are above the floor of the keyboard. Obviously I can reattach the mechanics and then measure the distance. Where would be the best place to add a strip of wood to restrict the action? Right in front of that strip the mechanism is attached to? Or on it, right in front of the mechanism? And is there anyone with experience with this model that might know approximately what thickness I'll need?
   Finally, in reattaching the mechanism, is there a way to safely and easily to this without disengaging the springs? I don’t think the people who made this instrument were thinking about how to make that a comfortable operation. Clearances are very tight and I’m not sure I have the right kind of tool to do it— what would I use? A fine, flat head screwdriver, maybe something with a notch in it?

2. AIR BUTTON— Before I opened up the bass side, I found the that the air button was kind of rough— there was some friction that kept it from depressing easily, it was rubbing against the edge of its opening. I thought I might need to just sand things a touch, and maybe that would help. What I noticed when I opened things, concerned me a little more, though— the air button pallet and attached arm and so on very easily get a little misaligned with the actual air hole.
Although the pallet itself is larger than the hole, the part of the pallet that meets that arm is right on the edge of the hole. Is there a way to adjust this so the air button works better with less risk of leaks?

3. FELT— finally, I wanted to ask about felt. The leather and padding on the pallets doesn’t look like its in terrible shape— but it’s pretty old and I wanted to get a sense if it was in need of replacing. If it were, how best to attach the felt and leather to the aluminum pallets?

I know that’s a lot, but I thought I’d put it out there in case anyone had any information or insight they felt like sharing. And if there's anything you notice or think of that I seem to have missed, please let me know! I have a little experience upgrading and modifying old Hohners, but this box is just different enough to cause me some issues, and nice enough that I don’t want to do anything too risky too quickly.
Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: Fixing up a Frontalini
« Reply #1 on: March 22, 2023, 10:57:33 PM »

1. The action can be limited by attaching a strip of material right under where the buttons land.  I use cork topped with felt.  It is quiet but not spongy.  You would attach this near the bottom of picture 1.  On these, it needs to be quite thick -- around 6mm.  The springs do not need to be removed or reattached.

If I were dealing with that splitting wood, I would fill the splits, and the holes, with cyanoacrylate resin, mark them through the mechanism's pilot holes, and re-drill them.

2. The air button can be moved by moving the screw on which it pivots.  The flap that is pressed from the outside will still contact the arm.  But before you do, you might want to ensure that it's not just a worn pallet facing, or a tilted pallet, that is causing the leak.

3. Almost any glue will attach felt to aluminum satisfactorily.  In my view it is best to use the least permanent glue necessary, since these are an item that gets changed over time.  I use a flexible, clear solvent based glue that is easy to remove.  PVA works as well.  Just be sure to smear a light layer on the metal, not the felt.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

seltzerplease

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: Fixing up a Frontalini
« Reply #2 on: March 27, 2023, 05:52:08 PM »

Gonk, thank you for your insights-- I'll be giving it a go in the next few days once I've gathered the materials and cleared the desk space. I think the process of breaking it down to write about it, and then reading your advice has made the process seem less daunting. Thanks again!
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fixing up a Frontalini
« Reply #3 on: March 27, 2023, 06:21:33 PM »

Pallet facings may need to be replaced if either they not airtight, or the Mayer has hardened so that there is a noisy slap when the pallet closes.

When gluing felt to wood or metal apply the glue to the hard surface, but the felt.  If you apply to the felt the glue will tend to soak in and harden the felt.

When removing keyboard mechanism it’s always best to release the springs firsts so that (a) the spring pressure does not cause the wood to tear as you remove fixing screws and (b) it’s much easier to replace if you aren’t fighting to compress all the springs at the same time.

Final tip:  it’s best to put you questions individually, makes it much easier to answer!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

seltzerplease

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: Fixing up a Frontalini
« Reply #4 on: March 27, 2023, 07:24:15 PM »

All very good points, especially the last one-- not wanting a cluttered board led to an overly cluttered post!

In regards to the springs, disengaging them before removal makes perfect sense, probably should have been obvious to me, and may have avoided the cracks (if they weren't already there), although with how cramped it was back there I wasn't sure how to do it. When disengaging them, what's the best tool to use? And if I disengage them to reinstall the mechanism, what's the best way to get the spring loops back on the hooks?

EDIT: also, thank you for your reply!
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Fixing up a Frontalini
« Reply #5 on: March 27, 2023, 07:37:05 PM »

All very good points, especially the last one-- not wanting a cluttered board led to an overly cluttered post!

In regards to the springs, disengaging them before removal makes perfect sense, probably should have been obvious to me, and may have avoided the cracks (if they weren't already there), although with how cramped it was back there I wasn't sure how to do it. When disengaging them, what's the best tool to use? And if I disengage them to reinstall the mechanism, what's the best way to get the spring loops back on the hooks?

EDIT: also, thank you for your reply!
I have a small flat bladed screwdriver that I have ground a V into the end of the blade, this is a good tool for refitting springs

mselic

  • Hero Member
  • *****
  • Online Online
  • Posts: 1683
Re: Fixing up a Frontalini
« Reply #6 on: March 28, 2023, 09:20:55 PM »

I've worked on a few of these.  Be aware that if you plan on changing the felt/leather pallet facings, you'll need to use material of the exact same thickness since the pallets and arms are one solid piece of metal.  If you replace with thicker or thinner material, the pallets won't rest properly on the fondo and you'll have air leaks, and you won't be able to adjust the angle that the pallets sit.
Logged
C#/D player

seltzerplease

  • Member
  • *
  • Offline Offline
  • Posts: 5
Re: Fixing up a Frontalini
« Reply #7 on: April 03, 2023, 06:05:34 PM »

Thank you everyone for your replies!

Lester-- I had wondered if a tool like that might not be the thing for the job-- glad to know I wasn't too far off! Going to be trying to make one in the next day or two.

Mselic-- that was definitely one of my concerns. The felt and leather on the treble and bass pads is 3mm, although the stuff on the air valve is thinner. I have enough of the felt and leather I ordered from Charlie Marshall for the job I think, and that's 3mm thick as well, thankfully. That should work, right? I don't think the current pads have compressed that much. Does that make it not work the risk?
Logged

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Fixing up a Frontalini
« Reply #8 on: April 04, 2023, 08:20:10 AM »

I would only do the pallets if they really need doing if airtight then no improvement possible by replacing and risking a can of worms.dont be scared of the spring all your old screwdrivers will help. You can pull them up using the screws especially if the holes are new but it is easier as Theo said Up to you only you can see how its going its not usually a problem srew alll screw a bit at a time if you do so not to bend the metal. either way if it dont work for you stop and try the alternative .
Logged
Mark Taylor
Folkloristmark
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal