Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Hohner Corso C/F 21+12 Buttons --> Fingering chart?  (Read 5682 times)

0 Members and 1 Guest are viewing this topic.

No. 327

  • Member
  • *
  • Offline Offline
  • Posts: 12
Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« on: March 26, 2023, 02:11:55 PM »

Hi! I hope all of you are having a great day.

I am new here and would like to ask a beginners question.

My grandfather passed away 5 years ago and I now his Hohner Corso ended up with me. See attached picture. No further documentation or inscriptions came with it. I would like to learn playing it, but I did not pay the slightest attention in my school days regarding musical education. Also my ears are not the best.

So I started by mapping a "fingering chart" (seriously?) for it. See attached PDF. I used a tuning fork app on my smart phone and checked it using a cheap keyboard I bought for the occasion. This turned out to be difficult with the basses/ chords. The app can't register multiple sounds at the same time. So I played very gingerly to have the app measure only the first tone of the chord played. Then I tried to replicate the now forcefully played entire chord on the keybord so I can get an idea what it is. The way I wrote them down is surely incorrect. I did it so, that the first tone of the chord the accordion played is the first in my notation. The basses were even more complicated. The app went completely haywire and my keybord only spans 3 octaves. I felt like this wasnt enough so I more or less guessed at this point.

I would like somebody knowledgable (anybody but me :) to look over my chart. Do such chords and basses even exist? Are those plausible on this accordion? If yes, are they common or more unusual? For what kind of music is it used best? How are those chords and basses properly named? Also, whats with the 4 tone chord at button 10? Have I misheard something? Is that a defect? Will there be 4 tone chords on other buttons that I just didnt hear or is 3 tone the accepted standard?

What else is important or interesting here? Please educate me. Also where does this accordion fall in, is it for beginners, seasoned hobby musicians or absolut professionals? Is Hohner a respected quality brand or more on the cheaper end? Will there be any more information, if I disassemble it, or shouldnt I? I would like to know its rough built date. Also I read Hohner lets the chinese do the manufacturing now. Will mine be affected to? Would that even be a problem? I feel like chinese generally can do pretty high quality for the price if they decide to and no middle man does the fingering chart on your wallet.

Best regards
David
Logged

No. 327

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #1 on: March 26, 2023, 02:17:14 PM »

Okay, here comes the picture. Had to compress it...

Oh, and I forgot: I saw the fingering charts on this site. The chart for 2 rows, 21 buttons with accidentals C/F matches, but only for the right hand. It shows only 8 buttons for the left hand and doesnt help me with this 12 bass/chord button model.
« Last Edit: March 26, 2023, 07:12:35 PM by No. 327 »
Logged

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #2 on: March 26, 2023, 07:36:43 PM »

It would appear to me that this instrument is set up for someone who knows what they want.

Most diagrams you will see on this website will be notated as Push | Pull, rather than Pull | Push, so, keep that in mind if you are comparing between them. And also will not be using the note H, so eg, your B = another diagram's Bb, and your H = another diagram's B. So that might confuse things sometimes, too.

I believe this is a 'conventional' CF instrument's layout as most here on this website would think of it: http://forum.melodeon.net/files/site/keyboards/2%20Row%20-%20C_F%20-%20with%20accidentals.jpg

The Keyboard side of this Corso appears to be laid out as a usual C/F instrument with accidentals, but with the apparent addition of a 'Gleichton' - the C5 | C5 button you've noted there. 'Typically' this would be C5 on the press and D5 on the draw, however C5 both ways is a common feature of some Hohner instruments.

As for the basses and chords, these seem to be somewhat arranged on this instrument in the conventional manner, in vertical pairs
Firstly would expect a pair with F and C fundamentals, with F major (F+A+C) and C major (C+E+G) chords. You can see that these can be found in the outside, middle vertical pair of buttons. Towards the Chin, you then have C with C major, and G with G major. Typically we'll call these F/C and C/G bass pairs.

From here, the layout becomes less unfamiliar, but still makes sense. Kneewards in this outside column, you have B major both ways (We'd typically think of this as Bb major, which is what you'll find on other diagrams). Typically this would be found on the inner column on a 2 row instrument, but, is located instead on the outer column - this is like you'd find on a 1 row 4 bass instrument in the key of F, however.

The inner column is harder to be sure of. The middle inner set appear to be a pull D minor and a push A chord. Between these, and the bass/chords on the outer column, we have covered all the conventional bass end things you'd find on an 8 bass C/F instrument. This leaves then the Knee end pair and the chin end pair on the inner row to identify.

I believe these are likely to be a push G major (G H D) paired with pull D (D F# A) major, and a Push A (A C E) minor paired with a pull E (E G# H) major. These are the extra basses and chords that I had (transposed, granted) on a 12 bass 2 row Hohner Pokerwork instrument and I've come across a few other examples with this same idea. However, these notes don't line up perfectly with exactly what you've reported, for example you seemed to find an F in what may be your A minor chord. So, it is a bit of a guess on my part.

These extra basses are, I think, common to 12 bass instruments from many years ago, but are uncommon nowadays. They aren't the greatest option for 'extra' basses but they are not the worst, either.

I can't really speak to much else though.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #3 on: March 26, 2023, 08:09:19 PM »

What else is important or interesting here? Please educate me. Also where does this accordion fall in, is it for beginners, seasoned hobby musicians or absolut professionals? Is Hohner a respected quality brand or more on the cheaper end? Will there be any more information, if I disassemble it, or shouldnt I? I would like to know its rough built date. Also I read Hohner lets the chinese do the manufacturing now. Will mine be affected to?

Your Corso is a 1960s model, made in Germany, not Chinese. Hohner melodeons have a good reputation as strong workhorses and are played by beginners and professionals alike.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

No. 327

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #4 on: March 28, 2023, 10:27:05 AM »

Dear Ms. Crisman, thank you for your elaborate reply!

So somebody wished for this instrument to be customized, regarding chords and basses?! This could not have been my grandfather. He told me, he learnt to play in the late 40s, but this one he only got a few years before passing away. My mother bought it for him at a flea market for 250€. Apparently he played the previous accordion till it fell apart. I have sadly no recollection what that one was and where it went.

So, as for the cords: they are not named after their lowest note? Because the F major in this case has the A in a lower octave and not in the same one. Is that always the case? Or does this make it a bass or slash chord? I wonder because C4F4A4 also sounds okay to my untrained ears. Same thing with the lower octave G in my C major. In any case thats why I wondered about the correct naming, since before I thought the noted of the chord have to be in the same octave, as per the examples in found on wikipedia arranged in root+major third+perfect fifth.

I noticed now the outer kneewards pair are both Gleichton (plural in german would be "Gleichtöne"). So i got one of the basses noted wrong. But principle wise its correct? Those Basses are all the same note spanning different octaves?

Inner middle A major: that would make it A3+C#4+E4, right? C#4+E4+A4 sounds okay though.

pull D (D F# A) major: that sound matches! But why Wiki notes D major als D F A? Also, when I increasingly pull, I can still hear the onset of 4
distinct tones, for sure. May that be a defect? Something like air drawn through where it should not go?

G major: fits. But if I play loud, at last a fourth high tone appears. Another defect?

pull E (E G# H) major: doesnt fit, i think. again there is also a distinct 4th rather high tone...

A minor: fits probably, but this time around with all notes in the same octave.

Again, thank you for your tremendous help! I will try to do a recording of the inner face and kneewards chords and upload it here. Would that help? However it will only be smart phone quality. Is that a lost cause?
Logged

No. 327

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #5 on: March 28, 2023, 10:32:43 AM »

Your Corso is a 1960s model, made in Germany, not Chinese. Hohner melodeons have a good reputation as strong workhorses and are played by beginners and professionals alike.

Thank you. Honestly, it also looks like a workhorse. Compared to other ones I saw online, the ornamentation and also the wood work is minimalist. The bellows were at some point fixed with blue insulation tape...
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #6 on: March 28, 2023, 11:03:21 AM »

The notes in the chords can be in any order so the lowest note is not necessarily the root note.
e.g. a C chord could be CEG, EGC or GCE. These are known as inversions.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #7 on: March 28, 2023, 11:17:38 AM »

Honestly, it also looks like a workhorse. Compared to other ones I saw online, the ornamentation and also the wood work is minimalist. ..

The German Hohners are the musical equivalent to the Volkswagon and the Nordic Folkboat (which is described as "a seaworthy, simple, easily handled, engineless, clinker built boat capable of cruising and fast enough to provide good racing").  Like these, they aimed at bringing a high class experience to "yer avarage man" and, like the Volkswagon and the Folkboat, with their two row instruments Hohners hit the bullseye. They don't aspire to to the high quality finish of Catagnaris and their ilk but they are still great instruments and great fun to play.

Older Hohners are highly recommended, round these parts, as starter instruments and remain, for many of us, a go to instrument. The mechanisms tend to be clacky (though this can be addressed by good fettling) but the reeds can sound marvellous when well set up and they are very responsive to play. You will find many top professional players  include themin their arsenal of instruments.

Given it's history, yours is likely to need some expert work. There  may be a significant cost but the photo you posted shows a very promising instrument and if you don't take to it you will be able to sell it on. 

Have you any more photos? Ones of the front and back of the extended bellows are  of interest.

It is worth getting a professional fettler to take look at it and get an estimate for the cost of servicing it. It is also possible that it may not actually need much work, given that the tuning doesn't seem to be that bad.

« Last Edit: March 28, 2023, 11:20:13 AM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

No. 327

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #8 on: March 28, 2023, 05:06:30 PM »

Dear rees,
now I can read up on it, thank you :)

Dear Greg,
thanks for your reply. I enjoyed to read it, since for me there is still a lot of ground to cover and I like context.

About the responsivness: some buttons instantly produce a tone. Others I have to push or pull the bellows like 4 or 5 times as fast or as much. Before that, they "sound" like the air button. Is that normal? Something with the particular note? Across all buttons I have, however, not felt any difference in resistance when working the bellows. I recall from some other post that this is sometimes a trade of accordions?

Attached are some more pictures. "Made in Germany" I did just not notice before.

Servicing it, however is a topic that makes me cringe. I read in the FAQ accordions are maintainance light and was delighted. However 60 years is a lot over the recommended once per year schedual...

Frankly, I enjoy the opportunity of a bit of conversation in english. But since I am new to this community I dont know its standing on near off-topics. Please let me know if its annoying rather than entertaining. Ahead now is my rant about what I feel are the socio-economic reasons, why I find it difficult to find someone to do the maintainance in Germany. Hopefully that doesnt apply elsewhere...

Be warned and feel free so skip the rest :)

The problem is I live in East Germany and in its easternmost part at that. Handwerk (handicraft?) is very difficult here. A lot of them dont offer proper work, they have either never learnt it from the previous generation or dont care for the trouble any more. I am not sure, if I can blame them. Because on the customer side it was ingrained for the last decades, that the most important aspect is to pay a little as possible. So amazon is always tempting. The solution also isnt to contract someone who demands more money, as he often will do equally bad work but is more adept at selling his work to you, hiding deficiencies or is just plain arrogant. Many customers (including me) dont know how to tell good work apart from bad work until its to late and the money is gone. After all, thats why someone goes to an "expert". And they seem to have no qualms whatsoever to use this situation for their advantage, selling almost equally crummy work for a wide range of money. Maybe some gems are out there, but I, at the start of my journey with this instrument, have no idea how to find them. A donkey could probably tell me he can do it and I would believe him.

Cars and Computers are what I have years of casual non-professional experience with. And the "experts" can still pull it of on me. The field where I am actually professionally qualified in, oh boy, the homework I get to see of some colleagues... It sure sounds right to the uninitiated, but really its often just guilded garbage. They all got their degrees and I am sure they could do it brilliantly if they would only care to.

I have the feeling, that in Poland and Czech Republic better craft traders can be found. Sadly I speak neither language so that complicates that. In Poland especially, I can feel the southward turn of every conversation, when my little polish ends and I reveal myself as one of ze germans. I dont blame them, feelings are feelings...
Logged

No. 327

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #9 on: March 28, 2023, 05:07:10 PM »

more
Logged

No. 327

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #10 on: March 28, 2023, 05:08:18 PM »

last

is that what you were looking for?
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #11 on: March 28, 2023, 06:34:14 PM »

Am I right in thinking that a 12 bass Corso is a bit unusual? (And quite desirable!)
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #12 on: March 28, 2023, 07:09:42 PM »


For repairs in Germany go to Len Killick at this address:
https://www.abenheimer-musikladen.de/index.html
« Last Edit: March 28, 2023, 09:04:48 PM by rees »
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #13 on: March 28, 2023, 07:20:27 PM »

Thanks for the pictures.
So far as thread drift goes, the usual arbiter is Theo. He is very strict about posts in  buy and sell. If things get out of hand he might move something or separate it into multiple posts. That's not very common, though. This post might be better placed in the Design, Construction and Repair discussion. You could start a fresh thread there, but I wouldn't panic.

It looks like the blue tape is covering wear on the bottom of the bellows, caused by it being rested on the players knees. Unusually, it is on the bass side. It is much more common to see it on the treble side. I  suspect the blue tape was put on to try and limit further wear. The actual damage may not be too severe.

I won't say as too much as there are some people much better qualified than me to advise.  One thing you are unlikely to get here is information on how much the instrument is worth. There are too many variables, but as Winston says, a 12 bass two row is a bit special.

Cross posted with Rees (who does know what he's talking about) but I'll post anyway.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #14 on: March 28, 2023, 08:11:58 PM »

Servicing it, however is a topic that makes me cringe. I read in the FAQ accordions are maintainance light and was delighted. However 60 years is a lot over the recommended once per year schedual..

Be prepared to send the instrument by courier to a good repairer.  I know a reliable one in Lithuania! Though you should be able to find someone closer. 

Here you can find a list of all the Hohner dealers in Germany.

https://www.hohner.de/en/dealers
« Last Edit: March 28, 2023, 08:15:52 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

folkloristmark

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 582
    • street entertainers
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #15 on: March 28, 2023, 08:14:33 PM »

All the buttons should produce a tone at same pressure. Sounds like some reeds need attention you will need to look. Most likely they are sticking or and the valves are loose missing etc. Most likley dirt and gentle pinging look at the threads here for info. As long as the waxx is holding not beyond most peoples abilities at least as far as getting an idea of condition.Good luck. The instrument is very modular and of simple construction.
Logged
Mark Taylor
Folkloristmark

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #16 on: March 28, 2023, 11:26:32 PM »

Servicing it, however is a topic that makes me cringe. I read in the FAQ accordions are maintainance light and was delighted. However 60 years is a lot over the recommended once per year schedual..

Be prepared to send the instrument by courier to a good repairer.  I know a reliable one in Lithuania! Though you should be able to find someone closer. 

Here you can find a list of all the Hohner dealers in Germany.

https://www.hohner.de/en/dealers

In the original German:

Here can you a list of all Hohner dealers in Germany find.
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #17 on: March 30, 2023, 05:40:50 PM »

Dear Ms. Crisman, thank you for your elaborate reply!

Again, thank you for your tremendous help! I will try to do a recording of the inner face and kneewards chords and upload it here. Would that help? However it will only be smart phone quality. Is that a lost cause?

Hello again!

Playing the basses and chords into eg a video a recording with your phone, and putting that on youtube, should actually be so effective as to allow us to remove all doubt as to their identity.

Regarding it's 'customisation' - kind of anything is possible? It may have been ordered from Hohner in this way by a music shop, or maybe hohner just sold them like this in a particular year - I am no expert at all on what ideas were tried. But with today's eyes, while the layout is a little unusual compared to conventions today, I can see that there is a coherent intent behind it, and it does have everything you would expect to find on an instrument like this today so you can definitely play it and find success with no significant hurdles.

I'm surprised that the E major chord doesn't feel like it fits, but, it was a bit of a guess. D major chords are definitely composed of D F# A, though, I'm not sure which wiki page you have found which suggests D F A? Perhaps you could link it, as it is probably a misunderstanding? And as it has been noted, especially when the notes are close together, chords do not need to be named for their lowest note. But this idea isn't wholly incorrect - however our instruments have bass fundamental buttons which are typically what we will use to decide that it is in fact an F chord. You could say that 'A C F' is also like a A minor sharp 5 chord? But convention dictates to avoid doing this, as it's harder to understand and doesn't really relate the intent of the chord.

Regarding the extra notes you are either hearing or seeing in your tuner, these all seem to be notes that would make sense within the chords. It's firstly possible that this instrument has 4 reed plates per chord, so, one of the chord tones is duplicated in another octave (which is fine and normal). It's also possible that your tuner or your ear are observing one of the 'harmonics' or over tones. But for example if you're playing an F chord and you hear another A or C or F, that would not damage or interfere with the chord, but if you heard say an extra C#, or an F# - notes that are not found in the chord you wanted to play, but are instead found in eg a chord that an adjacent button might trigger, like the C# from A major or the F# from D major, then really it is only that which would suggest a 'defect' to me.

Octave numbers can be a bit misleading - B3 is much closer to C4 than it is to C3, for example. Typically the reeds used in our bass end chords will fall within one octave of one another, rather than within one octave number/.

Making that video will probably help give further feedback but honestly if you're getting sounds out of it, then that's a really good start on deciding if the instrument is playable and something you could learn on, if you wanted.
Logged

No. 327

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #18 on: April 01, 2023, 07:22:03 PM »

Thanks to all of you for suggestions about its condition and contact infos for repair! As for its worth I think I got a rough idea now. Since its got some personal value, I am not looking to sell it anyway. But now I can be more anxious that nobody stomps on it :)

Thank you again very much for your reply, Ms. Crisman!
I did record the chords and will upload mp3 files in the following posts. Thats 6 files for the chords on the inner side. I named the files after the button number as per the beginners guide on melodeon.net and also according to the chords you suggested before. I did also record the outer side, but I will for now refrain myself from uploading more files. If there is interest, I could of course still upload them later. I did not record basses but would do it, if there's interest.

Sorry for the D major confusion. https://en.wikipedia.org/wiki/Major_chord#Major_chord_table clearly states D F# A. I don't know where else I could have seen it otherwise. I must have made a mistake there.

Okay, now to the sound files. Dont be confused by the creaking wood, thats my bed, not the accordion. Do they all sound alright and not broken? Are they the chords you previously guessed, or were the notes I provided to far off? I really hope, that for now no repair will be necessary. 
Logged

No. 327

  • Member
  • *
  • Offline Offline
  • Posts: 12
Re: Hohner Corso C/F 21+12 Buttons --> Fingering chart?
« Reply #19 on: April 01, 2023, 07:24:47 PM »

Button 9
Logged
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal