Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: 3row boxes, Serafini, printed parts, and alternative options  (Read 5500 times)

0 Members and 1 Guest are viewing this topic.

Phil Howard

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
    • Red Cuthbert Morris
3row boxes, Serafini, printed parts, and alternative options
« on: March 30, 2023, 08:25:33 AM »

I am being very tempted by the idea of a three row (G/C/accs) 18 bass to continue broadening my horizons - I keep finding myself trying to play things that really call for reversals of some of the extra notes on my Erika and/or extra basses.

My budget is in three row terms relatively limited at about £3.5k, I don't mind a bit of a wait but months rather than years is obviously preferable. Not too big and heavy is obviously nice, though given I have an Ouverture a little bulk/mass is not a deal-breaker. Three voices would be nice, but unlikely in this budget and a good two voice is preferable to a mediocre three voice. I'm open to second hand, but doubtful that anything fitting the bill is likely to come up (in the UK) so assume I would need to buy new.

From this starting point, a Serafini C3PO would be well in budget and be a little smaller and lighter than my Erika (much smaller and lighter than my Ouverture!), and should be ready around September. Marc has an excellent reputation, his boxes look very good value for money, and this would seem ideal in many ways.

That said, I'm curious about his use of 3D printed components though, and wonder how well they are likely to last compared to traditional metal ones, and what the longer term maintenance implications would be. Does anyone have any experience with this or thoughts on the matter?

In terms of alternatives, a Graet e Breizh from Atelier Loffet would seem the closest comparison in terms of features and timescale, if a little costlier, and more traditional in construction.

Other than Castagnari (which would realistically need to be second hand), I think Serafini and Loffet are the only makers I'm likely to have a chance to have a look at/play on in the near future as well, which is also a consideration.

Having looked around, other makes/makers' boxes seem to cost notably more/have longer lead times/be bigger & heavier, but any suggestions of other boxes that fit the criteria mentioned which I'd be likely to be able to get a chance to examine/trial (e.g. at Wensleydale) would also be very welcome!
« Last Edit: March 30, 2023, 08:30:49 AM by Phil Howard »
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #1 on: March 30, 2023, 08:39:47 AM »

Pete at Acorn has a GCAcc Benny listed for £3495.

[I realise that a Handry is more what you say you want, just a thought].
« Last Edit: March 30, 2023, 08:43:09 AM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #2 on: March 30, 2023, 08:40:41 AM »

Mengascini and Serenellini could also be in your price range.

or how about this
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #3 on: March 30, 2023, 08:48:01 AM »

I have a GC acc Castagnari Mory available pre owned and a new Castagnari Mory and Castagnari Handry in stock
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Phil Howard

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
    • Red Cuthbert Morris
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #4 on: March 30, 2023, 12:01:26 PM »

Thanks for the rapid thoughts/suggestions.

Pete at Acorn has a GCAcc Benny listed for £3495.

[I realise that a Handry is more what you say you want, just a thought].

I'm not sure I'd dare take a Handry out of the house given their cost!

It's all compromises and playoffs, the immediacy of "in stock" is worth something, but with fewer basses is it worth paying more? I'm unsure... I will need to actually play some boxes to make my mind up on that. I'd rather buy a box that is even further beyond me now, and hang on to it, than make part of the change and then have to sell/buy again to complete it. I think.  :-\

Mengascini and Serenellini could also be in your price range.

or how about this

I'd glanced at both of these manufacturers, and on paper they both make boxes that fit "the spec" and looking at continental traders' sites would probably be in budget, but I struggled to identify a likely opportunity to look at/play them.

For importing I'm chary of a second hand sale given the customs paperwork etc, and "selling for a friend" is something I find uncomfortable even domestically.

I have a GC acc Castagnari Mory available pre owned and a new Castagnari Mory and Castagnari Handry in stock
Thanks Pete - I'm more hung up on the "more buttons" than "more voices", and a new Handry is definitely out of budget! 
Logged

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #5 on: March 30, 2023, 04:47:35 PM »

That said, I'm curious about his use of 3D printed components though, and wonder how well they are likely to last compared to traditional metal ones, and what the longer term maintenance implications would be. Does anyone have any experience with this or thoughts on the matter?

So, regarding the 3d printed components, the tl/dr if being exposed to their main weaknesses, any temperature or UV exposure that might possibly be a concern for them in particular, would likely to be a concern for the any wax holding the reeds in and the exterior finish, respectively.

When we say something is 3d printed, we are typically saying it's made of 'plastic', but, there are different kinds of plastic that are readily available to use when 3d printing - PLA, ABS, PET, TPU, and the list likely goes on - and many of these can have further things added into them, such as carbon fibre, wood fibres or metal dust. All of these things have an impact on the longevity, strength, and well, basically all the material properties may be up for grabs.

For example, TPU is floppy and compressible. Obviously that isn't what's being considered here, but, you could use it for the gaskets between the bellows and the frame of the instrument. Good idea or bad idea - it's possible and could be 3d printed.

Most likely the mechanisms and internal arms in the instrument is what is being printed - the treble and bass mechanism are made of lots of little arms and levers that all pivot around and lift up pallets which is what allows the air to flow and sounds to come out. These are typically not exposed to the sun, and being that it's a wooden musical instrument with cardboard bellows and metal reeds in it, we don't typically bury it in the ground and attempt to compost it. So aside from maybe using different oils to lubricate it, if that was required, I don't see anything that would impact it's longevity. Hot car dashboards are known to weaken PLA and allow it to deform under load, PLA being the lowest temperature and weakest of the 3 most popular rigid plastic filaments that I'm aware of - but, instruments with waxed in reeds shouldn't be left in these situations either.

My belief is that any 3d printed component in any of the current popular materials - PLA too but I'd prefer to see PET or ABS - should have no problem lasting for the life of the instrument if the mechanisms have been designed appropriately to offer adequate strength and been made by a competent person who's paying attention to their 3d printer. Plus, if they don't last forever, the fact that the design of the instrument expects them to be 3d printed means that a 3D printed replacement part should be suitable. Since plastic tends to snap, rather than decompose into dust, it should be possible for someone entirely disconnected from the original creator to recreate and reproduce the part, but if it was me who'd sold you the instrument, I'd expect myself to be able to offer an apology while also grabbing the original design files and printing a replacement for you the same day, if I didn't in fact have a selection of them in a draw ready to go.

But I could be mistaken, and I would not currently have to live with my mistake. So if you're concerned then I'd say talking to the instrument builder about it would be the way to go.

Also bear in mind that not all acc rows are the same in intent, and buying used, you're often buying into whatever layout the previous owner believed in.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #6 on: March 30, 2023, 05:19:55 PM »

Eddy Jay is making concertinas using 3D printing using PLA.  These are proving extremely popular and I've not heard of any problems with degradation of the material, though it's early days.  He uses conventional reeds, bellows, thumbstraps, springs and metal button caps, everything else is printed.
« Last Edit: March 30, 2023, 05:23:02 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Phil Howard

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
    • Red Cuthbert Morris
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #7 on: March 30, 2023, 05:30:39 PM »

Thanks for the chapter and verse on 3d printing Gena.

Theres’s a bit more info and some photos (which look pretty solid) at https://www.diatoz.fr/accord%C3%A9ons-s%C3%A9rafini/caract%C3%A9ristiques/ it looks like “solid things” like pallets so still using metal connecting rods for the most part.

I’m not sure which of the materials the “résine par impression 3d” would be but it probably is indeed low risk. The curiosity as to longevity occurred to me after being asked in our local session how old my Erika is.

For a limited instrument, melodeons offer unlimited seeming rabbit holes to go down!

Yes, I assume that second hand comes with a fair likelihood of some layout adjustments depending on the existing setup. Careful consideration warranted on that front too!
Logged

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #8 on: March 30, 2023, 06:01:02 PM »

Jeremy Tozer is selling a GCF Serafini, but I think it is only 12 bass. You'll find him and the ad on Facebook. I think it was about £1800.

It might be worth contacting Antoine Errotaberea at https://laccordeonerie.wixsite.com/l-accordeonerie

His Simplex 3 row 18 bass is Eur3K and he's quoting 5 month lead time at the moment. I bought a low octave DG (2 row 8 bass for Eur1K) from him last year. Nice box and great value. I believe others in the UK has purchased from him since. Aside from shipping cost, I just needed to factor in 20% Import VAT, there was no customs duty.

Antoine used to work for Marc Serafini, before setting up his own business.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #9 on: March 30, 2023, 06:36:14 PM »

( I think Jerry is 'jez4' so a pm might do it if not a facebooker )
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #10 on: March 30, 2023, 10:35:17 PM »

Marc has an excellent reputation, his boxes look very good value for money, and this would seem ideal in many ways.

We're not listening to the same channels... At the moment I would be extra cautious in putting such amount of money into one of his boxes. There can be good boxes, but it's I think at best irregular in quality, and the customer service can be difficult afterwards if need be.
I concur with what has been said previously, if you're looking for an accordion in the same spirit, Antoine Errotaberea is a good choice, with limited waiting times. In the same way, French makers such as J. Vanglabeke or T. Rutkowski would provide similar priced boxes, albeit with a longer waiting time (between  and  years). Italian manufactured boxes might also be an option, like Mengascini/Verde.

heartshaped1

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 104
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #11 on: March 30, 2023, 11:37:30 PM »

Hi Phil,

You’re very welcome to try my G/C/Acc Van Der Aa at Wensleydale if that’s helpful? Mine only has 12 basses but they more usually come with 18. I understand Franz isn’t making any more but they do come up occasionally second hand here (which is where mine came from) and it’s a corker. Lightweight, three voice and three full rows. Even if it’s not for you, it’s always good to try out as many different things as you can, as it’s as important to work out what you don’t like as much as what you do, so feel free to come say hi and have a go!

All the best,
Vicky
Logged
G/C/Acc VanDerAa, D/G/Accs Oakwood, D/G/Acc Hohner Lucia, D/G Pariselle, G/C Castagnari Lilium, C/F Hohner Club I, D/G Hohner Pokerwork

Phil Howard

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
    • Red Cuthbert Morris
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #12 on: March 31, 2023, 08:31:59 AM »

Jeremy Tozer is selling a GCF Serafini, but I think it is only 12 bass. You'll find him and the ad on Facebook. I think it was about £1800.
Thanks - retuning the whole F row half of the basses is probably a bit more than the "some accidentals are likely to want adjusting" I had been thinking of!

It might be worth contacting Antoine Errotaberea at https://laccordeonerie.wixsite.com/l-accordeonerie

His Simplex 3 row 18 bass is Eur3K and he's quoting 5 month lead time at the moment. I bought a low octave DG (2 row 8 bass for Eur1K) from him last year. Nice box and great value.

Thanks, I had looked at Antoine's website before and must've got confused and/or read across rows. I thought his 3 rows were only in the costlier/slower bracket. I don't suppose you might be at Wensleydale next month with your box and willing to let me have a look/noodle please?

Yes, import VAT is a thing but at least the price charged by the business seller of a new box should have TVA knocked off, so administrative faff notwithstanding it should more-or-less cancel out. That said I understood that TVA is 20% the same as VAT but when I made a speculative enquiry with Loffet the price they quoted on export was based on a lower rate of TVA (16.5%, I think?), making me suspect that there may be some kind of small businesses relief on TVA and it won't exactly match. That or they are just sticking a bit back on the price to cover the hassle of customs paperwork, which is probably understandable. Plus of course import VAT is charged on the goods + P&P cost, not just the goods.
Logged

Phil Howard

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
    • Red Cuthbert Morris
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #13 on: March 31, 2023, 08:42:07 AM »

We're not listening to the same channels... At the moment I would be extra cautious in putting such amount of money into one of his boxes. There can be good boxes, but it's I think at best irregular in quality, and the customer service can be difficult afterwards if need be.

Thanks for the advice. I'd understood that he'd had a brief "wobble" perhaps a few years ago but was now back on course. Food for thought.

Rutkowski and Vanglabeke both look good, but unfortunately push out of my price range and I'm unlikely to "bump into one" I could try out. If only I had more cash, and the time in which to go on a tour of France (or even "just" to Chateau d'Ars)!
Logged

Phil Howard

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
    • Red Cuthbert Morris
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #14 on: March 31, 2023, 08:47:19 AM »

You’re very welcome to try my G/C/Acc Van Der Aa at Wensleydale if that’s helpful? ... Even if it’s not for you, it’s always good to try out as many different things as you can, as it’s as important to work out what you don’t like as much as what you do, so feel free to come say hi and have a go!

Thanks, I'd really like to. There's nothing like improving the frame of reference - perhaps quickly after your workshop on the Saturday? Much appreciated.
Logged

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #15 on: March 31, 2023, 01:13:08 PM »

Thanks, I had looked at Antoine's website before and must've got confused and/or read across rows. I thought his 3 rows were only in the costlier/slower bracket. I don't suppose you might be at Wensleydale next month with your box and willing to let me have a look/noodle please?

If you look at the PDF of 'tarifs' on his site, there are SimpleX listed with 3 row 18 and 24 bass options, but only two voice.
The ClassiX has a three row option and more features.

The chords are thirdless on the SimpleX. He uses Harmonikas reeds.

I hadn't thought about which boxes for Wensleydale yet!!! I can certainly bring my SimpleX along for you to try, although it is not set up for loud sessions!!!

Antoine wasn't registered for TVA when I purchased from him.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Phil Howard

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
    • Red Cuthbert Morris
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #16 on: March 31, 2023, 04:46:23 PM »

Thanks Andy

Yes, I clearly hadn't read his site properly, and that does make sense re. TVA.

If you decided to bring your Simplex I'd love to vent my curiosity, but please don't inconvenience yourself on my account if it means you're overloaded with boxes or would be bringing something unsuited to what you want to do!
Logged

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #17 on: April 18, 2023, 10:10:28 AM »

If you decided to bring your Simplex I'd love to vent my curiosity, but please don't inconvenience yourself on my account if it means you're overloaded with boxes or would be bringing something unsuited to what you want to do!

I will have the Simplex8 with me, and I'm staying at the Fountain.
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Phil Howard

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 134
    • Red Cuthbert Morris
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #18 on: April 20, 2023, 08:39:49 AM »

Thanks Andy, I will try to find you!  (:)
Logged

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: 3row boxes, Serafini, printed parts, and alternative options
« Reply #19 on: April 20, 2023, 07:24:42 PM »

Thanks Andy, I will try to find you!  (:)
Quote
Look for a free fleece and red concertina case!!
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal