Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Are there preferred PA brands for reed conversion to bisonoric?  (Read 1351 times)

0 Members and 1 Guest are viewing this topic.

Chris Deis

  • Member
  • *
  • Offline Offline
  • Posts: 16

I'm looking to go down the rabbit hole of retuning unisonoric PA reeds to create bisonoric reeds for my 1950's Paolo restoration project.  : )

I am looking at different makes of Italian boxes on eBay and wondering if most Italian PA reeds are of the same size and quality as Paolo bisonoric reeds? Would the reed plates be the right size to be interchangeable from box to box? I could modify reed block if needed, but reed plates that are the right size would save some time.

Can anyone recommend particular brands of PA accordions whose reeds are a good choice for my Paolo for tuning to bisonoric? That would be great to know, and potentially save me much time and trouble as there are a lot of older Italian PA accordions on the used market, but I have no way of knowing which ones to pursue. Thank you for sharing your thoughts and advice on this project.
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: Are there preferred PA brands for reed conversion to bisonoric?
« Reply #1 on: April 01, 2023, 10:14:55 AM »

thats alot of reeds to retune  and a lot of skill required to  get each and every reed  spot on in its new environment, Is it realy worth the effort

george
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Are there preferred PA brands for reed conversion to bisonoric?
« Reply #2 on: April 01, 2023, 10:36:24 AM »

Hi, I have just converted 3 of my boxes to repurposed reeds. 2 from CF to DG and the latest to BC. I used 1920’s Ficosecco for the DG’s and a mix of Scandalli (treble) and Galanti (bass) for the BC.  From memory they were pretty consistent re sizing. The treble plate width was 15-16mm.

I was fitting to an old Dedenis and two old Hohners. The PA plates and reeds were longer but the widths matched well. I had to adjust the reed chamber lengths a bit at the low end but no major mods. Simple cutting with craft knife.

What you will find is that you will select the donor reed to suit both chamber length and target notes. I tuned up and more importantly down.  Weighting lightly with solder becomes an art.

For me the age of the reed is a bit immaterial. The best ones I have are the Ficosecco’s from 1920’s.  Wonderful reed plates and close tolerances.

Hope this helps.

John
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Are there preferred PA brands for reed conversion to bisonoric?
« Reply #3 on: April 01, 2023, 10:54:20 AM »

And just to add to John’s post above Italian treble reed plates are pretty much always 16.5mm in width. There is more variation in bass reed sizes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Are there preferred PA brands for reed conversion to bisonoric?
« Reply #4 on: April 01, 2023, 03:04:13 PM »

An old Paolo Soprani PA from the same vintage as your box would be an obvious possibility (or am I missing something?). They come and go for all kind of prices, from outrageous to bargain.
Logged

Chris Deis

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: Are there preferred PA brands for reed conversion to bisonoric?
« Reply #5 on: April 01, 2023, 04:36:37 PM »

Thanks for the good input!

thats alot of reeds to retune  and a lot of skill required to  get each and every reed  spot on in its new environment, Is it realy worth the effort
george
Good point - I won't know until I'm well into it I'm afraid. IMO this will be good learning process at worst case.

 
An old Paolo Soprani PA from the same vintage as your box would be an obvious possibility
That would be my first choice, but I think I'd have to get pretty lucky to find one at what I want to pay. Hoping other Italian boxes will provide same quality as Paolo would.  : ) 

Hi, I have just converted 3 of my boxes to repurposed reeds. 2 from CF to DG and the latest to BC. I used 1920’s Ficosecco for the DG’s and a mix of Scandalli (treble) and Galanti (bass) for the BC.  The PA plates and reeds were longer but the widths matched well.
John
Thanks John - I'll keep an eye out for Ficosecco and Scandalli boxes.

Thanks Theo - it's good to know the Italian reeds widths are consistent.

If anyone else has brand recommendations for Italian PA's that would be very helpful.
Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Are there preferred PA brands for reed conversion to bisonoric?
« Reply #6 on: April 01, 2023, 07:06:27 PM »

I've found that reedplates from larger PA's tend to be quite a bit longer than will fit into our reedblocks, when they're near the pitch you're looking for. Many of them longer than the reedblock can accommodate even when carved out to the fullest extent! And then; sometimes, there's not the room to extend the top of the block for fear of touching the opposite bass block.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Chris Deis

  • Member
  • *
  • Offline Offline
  • Posts: 16
Re: Are there preferred PA brands for reed conversion to bisonoric?
« Reply #7 on: April 01, 2023, 08:01:36 PM »

I've found that reedplates from larger PA's tend to be quite a bit longer than will fit into our reedblocks, when they're near the pitch you're looking for.
Thanks Winston for the caveat. I'll take it under advisement  - that's a fear I have which is why I wonder if certain makes of PA's would provide reeds that would be a better fit for my old Paolo. I guess I'll just have to proceed with caution and hope for the best.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Are there preferred PA brands for reed conversion to bisonoric?
« Reply #8 on: April 01, 2023, 10:17:06 PM »

Old Paolo reeds are also usually a bit longer than typical Hohner reeds that may be what Winston is comparing with.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal