Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: PA Reed Variance  (Read 544 times)

0 Members and 1 Guest are viewing this topic.

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
PA Reed Variance
« on: April 07, 2023, 04:37:08 PM »

Just thought these photos might be of interest.  They show an Ficosecco PA reed on the left and Hohner H melodeon reed on the right. Both are from the 1920’s and both are A4 at 440 Hz.  I took the photos to show the differences in design.  I have been using the Ficosecco PA reeds to convert CF boxes hence the interest.

Here are some key features (Ficosecco/Hohner):

Plate length: 41mm/40mm
Plate width: 16mm/16mm
Plate thickness: 3.35mm/2.45mm
Plate Material: Aluminium/Zinc
Weight: 5g/9g

The Hohner reeds are “lighter” when you flex them.  Note: the Ficosecco it quite a bit wider.

The final photo shows the tighter tolerances re reed gap. 

Just thought it would be of interest if you are thinking of trying PA reeds  (:)
« Last Edit: April 07, 2023, 06:20:25 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: PA Reed Variance
« Reply #1 on: April 07, 2023, 04:53:02 PM »

Performance

« Last Edit: April 07, 2023, 05:09:11 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal