Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How do they get those basses?  (Read 1683 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
How do they get those basses?
« on: April 14, 2023, 05:32:40 PM »

I'm a big fan of the big, deep, resonant bass sound that you get from old Paolos and old Corsos.  Most modern day boxes seem to lack that booming, "shimmering" sound.  I figured it must be the reeds, the construction of the reedblocks, etc.  However, a while ago I placed the bass reedblock from an old Paolo (which had that deep, rich bass sound) into an instrument of similar construction.  The block was a perfect fit, with the same reed setup, same tuning, etc.  As soon as I put the Paolo block into the other instrument, the big bass sound was gone.  It just sounded ordinary, like the bass end of a Saltarelle, Castagnari, Hohner Erica, etc.  Put the block back in the Paolo and it sang and rang out loud!  It must be the casework?? There was very little difference in design between the two.  Unfortunately, the reedblock from the other instrument didn't fit in the old Paolo (due to the 'step' being too tall to fit under the brace) so I didn't get a chance to see how it worked in reverse.

Surely there must be something that can be pinpointed when building/designing a box to get that big bass sound? (Helikon basses being a different thing altogether..)  Why would one instrument have a deep, rich bass, and the same block and reeds sounding rather dull in another box that was essentially a copy of the first?
Logged
C#/D player

Mike Hirst

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1433
  • Black Dot B/C, Bastardo C#/D, Corona II GCF
Re: How do they get those basses?
« Reply #1 on: April 15, 2023, 10:43:46 AM »

Not just Paolos and Corsos.

Yesterday I picked up an instrument I had not played for some time. A Swiss built Hohner Primatona IV D/D#, set up for playing in Eb. I was blown away with the depth and resonance coming from the left hand. Not a helicon bass, but with some serious parp-ability.

http://mikehirst.netfirms.com/audio/edelweiss.mp3

I had the instrument tuned and set up by Theo Gibb, perhaps he has some useful insight.
Logged
Semper idem, sed non eodem modo

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: How do they get those basses?
« Reply #2 on: April 17, 2023, 10:25:40 AM »

Important factors that influence sound, besides reed & valve quality, are size of openings in the fondo, thickness of fondo and reed block base and of course pallet lift.
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: How do they get those basses?
« Reply #3 on: April 17, 2023, 07:17:11 PM »

Just a thought: I think these boxes (Paolo + Corso) have a 4-bass setup, where a bass note is actually 1 bass reed and one octave reed (on bass block), plus 2 higher reeds 'borrowed' from the chord block.  In your test, did you disable the chord reeds to isolate the bass block as source of the good sound ?  Bass richness could be from the contribution of higher reeds...
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: How do they get those basses?
« Reply #4 on: April 17, 2023, 08:30:52 PM »

If I recall correctly, the shared bass/higher reed setup was the same in the test instrument as the Paolo. What you’re describing was the first thing I thought of and looked at.
Logged
C#/D player

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: How do they get those basses?
« Reply #5 on: April 17, 2023, 09:46:09 PM »

It would be interesting to know what the “instrument of similar construction “ was?
I think you are on the right track when you say it might be about construction of the Paolo.
I wonder what such basses/chords would sound like in a tin accordion? No doubt, someone will tell me they would sound the same?  (:)
Logged

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: How do they get those basses?
« Reply #6 on: April 18, 2023, 05:13:28 AM »

The other box was a Manfrini, which is *superb*, but the basses are very ordinary as compared to the Paolo. The Paolo bass block w/ reeds lost that characteristic, resonant bass sound when installed in the Manfrini casework.
Logged
C#/D player

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: How do they get those basses?
« Reply #7 on: April 28, 2023, 09:13:32 PM »

Just a thought: I think these boxes (Paolo + Corso) have a 4-bass setup, where a bass note is actually 1 bass reed and one octave reed (on bass block), plus 2 higher reeds 'borrowed' from the chord block.  In your test, did you disable the chord reeds to isolate the bass block as source of the good sound ?  Bass richness could be from the contribution of higher reeds...

I think you were right!  While the shared bass/chord reed mechanism was identical between the two boxes, the actual reed combination that was used is different.  Both the Manfrini and Paolo used a '4 reed' bass system, where the bass button actives the two big bass notes (an octave apart) on one block, and then two reeds on the chord block.  However, on the Manfrini, the two reeds on the chord block that are used are the same octave, which means that each bass note only covers three octaves (the two different octaves on the bass block, plus the one octave x 2 reeds on the chord block), as opposed to four octaves like a Corso or, presumably, the old Paolo.  The fourth octave reed in those cases is a higher octave, which gives it that 'shimmering' sound, I believe.  I no longer have the Paolo to check and confirm, but this setup is exactly what I found in an old Hohner Club I have on hand that has that same, deep bass sound that I'm after.
« Last Edit: April 28, 2023, 09:16:07 PM by mselic »
Logged
C#/D player

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: How do they get those basses?
« Reply #8 on: April 29, 2023, 12:55:24 AM »

Not just Paolos and Corsos.

Yesterday I picked up an instrument I had not played for some time. A Swiss built Hohner Primatona IV D/D#, set up for playing in Eb. I was blown away with the depth and resonance coming from the left hand. Not a helicon bass, but with some serious parp-ability.

http://mikehirst.netfirms.com/audio/edelweiss.mp3

I had the instrument tuned and set up by Theo Gibb, perhaps he has some useful insight.

Great playing and great box, I love my C#D Primatona IV (also tuned by Theo).

Let me know if that one ever makes it into the de-accessioning Mike!

But in the meantime record and share more with it!

PG
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal