Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: thumb strap on Hohner  (Read 2010 times)

0 Members and 1 Guest are viewing this topic.

Andrew Charman-Williams

  • Member
  • *
  • Offline Offline
  • Posts: 23
thumb strap on Hohner
« on: May 04, 2023, 12:36:59 AM »

I have recently got a pokerwork C/F German with plastic keyboard. The thumb strap which was obviously changed during a refurbishment has come off. It was held on by a single bolt/nut and the rotating of this has caused it to come loose. Looking at some previous posts a single nut/bolt is not the normal fixture which makes sense as this design is likely to do that unless a locking nut or similar is used.

To put this back on I assume I would need to take the bellows off to unscrew the keyboard and then it would seem fiddly to put the nut on inside the keyboard.

One approach would be to choose not to replace it. I don’t have a strap at the moment but once I do it is quite possible I’ll find the thumb strap a nuisance and restrictive of hand movement.

Otherwise I assume a better approach would be to use two mounting holes rather than just the one (though being able to rotate it did seem good) and use rivets or bolts to secure, either modifying the mounting end of the thumb strap or replacing it to allow for two rivets/bolts rather than one.
Logged

Dick Rees

  • Neo-Luddite
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1640
Re: thumb strap on Hohner
« Reply #1 on: May 04, 2023, 02:09:47 AM »

Pop rivet?
Logged
"You're making the wrong mistakes."
...Thelonius Monk

"I never made one of my discoveries through the process of rational thinking."
...Albert Einstein

"If Art Tatum took up classical music seriously, I'd quit my job the next day."
...Vladimir Horowitz

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: thumb strap on Hohner
« Reply #2 on: May 04, 2023, 03:59:15 AM »

Chicago bolts (binding screws) are less likely to crack plastic keyboard than rivets and they allow adjustment.
Logged

Andrew Charman-Williams

  • Member
  • *
  • Offline Offline
  • Posts: 23
Re: thumb strap on Hohner
« Reply #3 on: May 04, 2023, 06:16:53 AM »

Chicago bolts sound like a good idea if I do put it back on. I guess they could still work loose and be hard to tighten back up if only one mounting point is used as the thumb strap is set for as the strap rotating may work the bolt loose. So if I replaced it it might be better getting a new strap that is wide enough to fully cover both mounting points. The unused (blocked) hole shouldn't take much to re-open.

I am leaning towards leaving it off, getting a shoulder strap to use and just playing without the thumb strap in the way. But it's nice to know the best approach if I do want to put it back on.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: thumb strap on Hohner
« Reply #4 on: May 04, 2023, 09:02:45 AM »

There is another possible problem with using a bit and bolt.  Depending on its size and position it may obstruct one of the levers and cause it to travel less and feel different from its neighbours.

Best try the shoulder strap first.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: thumb strap on Hohner
« Reply #5 on: May 04, 2023, 01:00:28 PM »

I have recently got a pokerwork C/F German with plastic keyboard. The thumb strap which was obviously changed during a refurbishment has come off. It was held on by a single bolt/nut and the rotating of this has caused it to come loose. Looking at some previous posts a single nut/bolt is not the normal fixture which makes sense as this design is likely to do that unless a locking nut or similar is used.

To put this back on I assume I would need to take the bellows off to unscrew the keyboard and then it would seem fiddly to put the nut on inside the keyboard.

One approach would be to choose not to replace it. I don’t have a strap at the moment but once I do it is quite possible I’ll find the thumb strap a nuisance and restrictive of hand movement.

Otherwise I assume a better approach would be to use two mounting holes rather than just the one (though being able to rotate it did seem good) and use rivets or bolts to secure, either modifying the mounting end of the thumb strap or replacing it to allow for two rivets/bolts rather than one.

Andrew:

Lots of folks play without the thumbstap.  Many take it off their Hohners intentionally (see Lesters HotRod videos). Theos' advice is best--get brackets if you don't have them and get shoulders straps (two of them  (:)) first.
Then evaluate.

--Steve
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: thumb strap on Hohner
« Reply #6 on: May 04, 2023, 02:45:51 PM »

Then again Gavin Atkin uses only thumbstraps and doesn't even have shoulder strap fittings.
He manages fine.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: thumb strap on Hohner
« Reply #7 on: May 04, 2023, 02:51:50 PM »

Hohner thumb straps available from CGM - £8.95 including rivets.
Here's the link: http://www.cgmmusical.co.uk/CGM_Musical_Services/Thumb_Straps.html#2
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: thumb strap on Hohner
« Reply #8 on: May 06, 2023, 07:20:55 AM »

I typically put a "T" nut in the hole from the inside of the keyboard and glue it in place. This basically give toy a threaded hole to mount the strap to.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Andrew Charman-Williams

  • Member
  • *
  • Offline Offline
  • Posts: 23
Re: thumb strap on Hohner
« Reply #9 on: May 06, 2023, 07:36:33 AM »

Thanks. A couple of possible alternatives.

When I get a shoulder strap I think I’ll try it without putting the thumb strap back on. If, after I’ve given the shoulder strap a good try, I find I want the thumb strap back on I’ve got some options to try.
Logged

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: thumb strap on Hohner
« Reply #10 on: May 06, 2023, 10:30:57 AM »

Thanks. A couple of possible alternatives.

When I get a shoulder strap I think I’ll try it without putting the thumb strap back on. If, after I’ve given the shoulder strap a good try, I find I want the thumb strap back on I’ve got some options to try.

Having dealt with the "thumbstrap good/thumbstrap bad" argument you now need to prepare yourself for the "single strap good/double strap bad" and vice versa argument.... >:E :|glug
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: thumb strap on Hohner
« Reply #11 on: May 06, 2023, 10:54:04 AM »


Otherwise I assume a better approach would be to use two mounting holes rather than just the one (though being able to rotate it did seem good) and use rivets or bolts to secure, either modifying the mounting end of the thumb strap or replacing it to allow for two rivets/bolts rather than one.

Two mounting holes rather than one - absolutely.
Almost all of the older boxes of any quality (including wooden keyboard Hohners) had a leather thumb strap secured by two screws and a cover plate. Ideally (in my book) the leather needs to be firm enough to grip a thumb pointing  toward the instrument, but soft enough to allow the thumb to rotate so fingers can  reach high and low notes.
It appears that when the plastic keyboard arrived Hohner for a time fixed thumb straps with only one rivet. This works for players who keep the thumb braced against the front of the keyboard (videos of Jimmy Shand demonstrate). Personally I find this hold agonising. Excarbated by the sad fact that at some point Hohner appear to have sent some later German made boxes out with artificial leather thumb straps (I had one such HA112 - though the PU leather which lacerated my thumb may have been a replacement - however the box though secondhand was in good condition with little wear to the pokerwork motifs on the growl box...these features may not have been unconnected!)
Logged

Andrew Charman-Williams

  • Member
  • *
  • Offline Offline
  • Posts: 23
Re: thumb strap on Hohner
« Reply #12 on: May 06, 2023, 10:57:14 AM »

 ;D Yes I’ve seen some of those. Maybe add in the elbow strap style that I’ve seen someone (Lester?) use just for another option.

No absolute right or wrong way as it’s what suits the player. And they probably all have potential good and bad points.
Logged

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: thumb strap on Hohner
« Reply #13 on: May 06, 2023, 11:10:30 AM »

No absolute right or wrong way as it’s what suits the player. And they probably all have potential good and bad points.
Don't you come here being reasonable and accepting of others views   (:)

Andrew Charman-Williams

  • Member
  • *
  • Offline Offline
  • Posts: 23
Re: thumb strap on Hohner
« Reply #14 on: May 06, 2023, 11:12:26 AM »


Two mounting holes rather than one - absolutely.
Almost all of the older boxes of any quality (including wooden keyboard Hohners) had a leather thumb strap secured by two screws and a cover plate. Ideally (in my book) the leather needs to be firm enough to grip a thumb pointing  toward the instrument, but soft enough to allow the thumb to rotate so fingers can  reach high and low notes.
It appears that when the plastic keyboard arrived Hohner for a time fixed thumb straps with only one rivet. This works for players who keep the thumb braced against the front of the keyboard (videos of Jimmy Shand demonstrate). Personally I find this hold agonising. Excarbated by the sad fact that at some point Hohner appear to have sent some later German made boxes out with artificial leather thumb straps (I had one such HA112 - though the PU leather which lacerated my thumb may have been a replacement - however the box though secondhand was in good condition with little wear to the pokerwork motifs on the growl box...these features may not have been unconnected!)

Certainly don’t like the idea of having the thumb braced against the keyboard. Unfortunately (especially for the other instruments I play) my right thumb got jarred badly years ago and is often sore or stiff so I would avoid things like that which would be likely to cause soreness and discomfort.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal