Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner HE aka sparkles / repair work  (Read 1881 times)

0 Members and 1 Guest are viewing this topic.

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Hohner HE aka sparkles / repair work
« on: May 13, 2023, 06:44:16 PM »

I am starting a new thread on my progress of this recently purchased box.
http://forum.melodeon.net/index.php/topic,29289.0.html

I’m working on repairing the broken keyboard.
I still need to elongate the holes on it.
« Last Edit: May 13, 2023, 06:47:07 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HE aka sparkles / repair work
« Reply #1 on: May 13, 2023, 08:13:54 PM »

Almost there
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HE aka sparkles / repair work
« Reply #2 on: May 14, 2023, 06:01:43 PM »

A picture of the bellow cloth, I think helps to confirm the color ( I see green and it is iridescent)
The cloth on both ends was possibly light green from what I see on the bass end back side and the grill but it was very dirty.
This would have be nice if still green!!! My guess.
« Last Edit: May 20, 2023, 06:39:00 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HE aka sparkles / repair work
« Reply #3 on: May 21, 2023, 01:03:48 AM »

So I started removing the ( dreaded )bellows tape! Plan is tape job. Well it is on there pretty good in spots, mainly towards the middle. Sanding those areas down helps remove the tape surface.
So after reading through threads I found this a quote from diatonix.

“I must admit that I have used water myself to moisten stubborn tape, but I don't recommend it, as it may easily weaken the cardboard underneath, while not making the job itself much easier. If the tape to be removed is made of paper (e.g. Hohner Erica) I sometimes just get rid of the bits covering the metal corners. The paper is so thin that you can simply cover it with new kaliko and get away with it. You might consider sanding it slightly before doing so, as the glue will stick better. Carini provides a variety of kaliko that is slightly  wider than normal ("dermoide per riparazione"), which makes it easy to cover anything you don't want to be visible. Quite often I cut my own tape from something known as granitol (looks a lot better on Ericas and older instruments in general rather than the shiny Italian "dermoide rigata"), bookbinders  are usually well stocked with it and it comes in most colours.
In the old days animal hide glue was commonly used for bellow tape, in that case a hair drier might be helpful (if used respectfully!) should you insist on removing all of the original kaliko.“

So question is do I need to use water, wait, and then scrape to remove all or just lightly sand/ scuff up , dust off and done? It does appear to be a paper tape. It’s glued to a cloth/ linen fabric.

I haven’t tried the hair dryer yet, but maybe I don’t have to?
« Last Edit: May 21, 2023, 01:05:33 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HE aka sparkles / repair work
« Reply #4 on: May 21, 2023, 01:20:06 AM »

Also thanks Theo!!
I went ahead and took the keyboard mechanism apart to clean rust and free up a couple of sticky keys.
I set everything aside as I was taking it apart, in the order in which I took it apart so I could just put it all back together in reverse, easy right? Until I bumped into the springs and messed up my order. Well they didn’t look different to my eye so I just reinstalled them, it wasn’t until after that that I looked for a bellows re tape thread and stumbled on a treble repair thread where Theo mentioned different sizes of springs for the long lever 55mm and short lever 50mm. Sure enough I had some in the wrong spot, better now.
« Last Edit: May 21, 2023, 01:21:55 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Hohner HE aka sparkles / repair work
« Reply #5 on: May 21, 2023, 07:27:55 AM »

You can usually feel the different tension of the springs with your fingers if it is hard to tell by eye. The stronger ones go on the longer arms. I think the gauge of wire is sometimes different and a caliper would be handy there.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HE aka sparkles / repair work
« Reply #6 on: May 21, 2023, 01:52:37 PM »

You can usually feel the different tension of the springs with your fingers if it is hard to tell by eye. The stronger ones go on the longer arms. I think the gauge of wire is sometimes different and a caliper would be handy there.
Thanks Kimric!
I did use a caliper to get them sorted out. I set it on a feeler gauge.508mm that was available, the smaller ones passed right through and the larger ones wouldn’t.
My first two row repair, so a new lesson to be learned, the hard way!! By the end I was getting pretty good at breaking down and reassembling😀

Work on bellows tape continues…….
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HE aka sparkles / repair work
« Reply #7 on: May 23, 2023, 09:01:31 PM »

As far as I can get ( not like the last ones I did which came off easily).
I got the material back from corners a bit, then it was like hitting a wall.
I tried wetting it slightly after a little sanding to break the surface of the paper, nothing!
So I just sanded more. The material the tape is stuck to is like a paper but has a cloth feel. I don’t want to tear it up taking the paper tape off.
I unfortunately bought the tape before trying to remove and got 3/4” .
Although I took all the tape material off the place where it folds, I might still be able to use if I’m careful.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HE aka sparkles / repair work
« Reply #8 on: May 29, 2023, 01:36:59 AM »

Separation anxiety!!  Lol but seriously will everything be good when complete!
Results of re taping and gluing the bellows back on, I will be putting on bellow gaskets tomorrow and should know soon enough.
Pallets redone and back on  8)
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HE aka sparkles / repair work
« Reply #9 on: May 29, 2023, 01:51:34 AM »

So buttons…….. cleaning them when really dirty, what works best?
I tried a few products with some brightening / not much.
I found that a dab of spit on a super fine sandpaper works well but am I damaging the button?
A few buttons in the middle of the keyboard were darker, I lightened them a tad.
I’m missing two bass ( broken) buttons, so tried the sanding on a spare I had left over, what do you think?
Button on the left in my hand is what is on the box ( it is closer in the picture) middle bottom is what I had before sanding and the lighter one is after the sanding treatment.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner HE aka sparkles / repair work
« Reply #10 on: May 29, 2023, 09:33:25 AM »

Those buttons are made of casein, and over time the surface material can degrade, darken in colour and even develop a fine network of cracks.  Dirt can be cleaned off with a detergent in warm water.  If it’s more than dirt then your method with fine abrasive paper is ok, but you might want to polish the surfaces afterwards.  Metal polish is good for this. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HE aka sparkles / repair work
« Reply #11 on: May 31, 2023, 01:03:25 AM »

Those buttons are made of casein, and over time the surface material can degrade, darken in colour and even develop a fine network of cracks.  Dirt can be cleaned off with a detergent in warm water.  If it’s more than dirt then your method with fine abrasive paper is ok, but you might want to polish the surfaces afterwards.  Metal polish is good for this.
thanks Theo!
I used the polish after the fine sanding and it worked great!

Couple of new questions if I might, what is the original black finish?
I had a choice between satin black or gloss and went with the satin but maybe should have gone glossy.

Second question is is there a set distance between the treble limit on the long / small levers ?
So say I have around 5mm behind the long levers / outer row , what would I need additional to the short lever? Maybe 3mm more? And by the looks of things I will need to do the short levers individually or in sections.
Edit to add: new to fixing a two row :o
« Last Edit: May 31, 2023, 01:07:48 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HE aka sparkles / repair work
« Reply #12 on: June 04, 2023, 12:43:17 AM »

The results -
Left it as is for now ( no key changes) and at 442 pitch.
These reeds sound great and after valves and wax just need a couple of notes tweaked.

A picture of my waxing included, first time using a wax pot and tool ( like Diatonix uses) .
Once you have the technique ( or sort of ) it is very fast and clean looking. I was somewhat getting towards the end. Clean fills between the reeds.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HE aka sparkles / repair work
« Reply #13 on: June 04, 2023, 12:44:14 AM »

Couple more
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HE aka sparkles / repair work
« Reply #14 on: June 04, 2023, 03:05:01 PM »

Here’s what I ended up doing with the keyboard padding for button travel.
My long arms/ levers  needed about 5mm behind them ( I just used a self stick furniture padding), short arms / levers got an extra 2mm strip of wood tacked on the keyboard then applied little bits of the same material.
The feel is firm but soft and if needed you can press it in slightly.
I’m not sure if that’s what you all may have done?
I will try to post a sound at some point, it’s got some honk!
Now I just need to learn the fourth apart system  :|| I’ve been using the C/F with accidentals as a reference and just stepping back a half step to try to understand the layout and possibilities.
« Last Edit: June 04, 2023, 03:08:02 PM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner HE aka sparkles / repair work
« Reply #15 on: June 04, 2023, 03:07:35 PM »

Nothing wrong with your keyboard, there are several ways of doing it and yours is perfectly fine. Nice job.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Hohner HE aka sparkles / repair work
« Reply #16 on: June 04, 2023, 03:15:09 PM »

Nothing wrong with your keyboard, there are several ways of doing it and yours is perfectly fine. Nice job.
Thanks Rees!
It’s all I could think of at the time, using common materials I have and it’s all reversible.
As always a few more little tidbits to do.
Boy it would be nice if it was a beautiful green color!!
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal