Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Strap Buckle Protectors (Again)  (Read 2926 times)

0 Members and 1 Guest are viewing this topic.

MandoC

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 266
    • Swing Dogs Contra Dance Band
Strap Buckle Protectors (Again)
« on: November 15, 2009, 10:22:16 PM »

There was a thread sometime in the past about this subject.  I started to have trouble with the buckles on the lower end of my accordion scratching the instrument. I discovered double sided velcro (sticks to itself). I could only find 3/4" wide size so it takes two strips to cover one buckle. It works pretty well though, except it is a shade on the bulky side. FYI  Charlie
Logged
Charlie Hunt
Mandolins and now, B/C Button Accordion)

Swing Dogs Contra Dance Band, Facebook Page:https://www.facebook.com/SwingDogs

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Strap Buckle Protectors (Again)
« Reply #1 on: November 15, 2009, 11:27:35 PM »

Hi,
Have just placed an order for 25 sets in black and 25 set in beige,will advise when they arrive.
They are in leather with velcro fastening


Pete
« Last Edit: November 16, 2009, 07:36:22 AM by jilly »
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Strap Buckle Protectors (Again)
« Reply #2 on: November 16, 2009, 07:33:44 AM »

There was a thread sometime in the past about this subject.  I started to have trouble with the buckles on the lower end of my accordion scratching the instrument. I discovered double sided velcro (sticks to itself). I could only find 3/4" wide size so it takes two strips to cover one buckle. It works pretty well though, except it is a shade on the bulky side. FYI  Charlie

Charlie,

I was selling these at Witney last year. I still have some for sale in black. The strips are 1-inch wide and each one is long enough to wrap around the buckle, so you only need one strip per buckle.
Price is £3 a set, £5 for two sets. Each set contains three strips, sufficient for one strap with three buckles.

If you want, send me a PM with your address and how many you want, and I'll pop them in the post.

Cheers,
Steve
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Strap Buckle Protectors (Again)
« Reply #3 on: November 16, 2009, 07:49:30 AM »

My new one this year came with a piece of elastic tubing coaxially over the strap. You adjust the buckle and then slide the tube back down over it to cover the metal. Works well, but you need a the right fit/elasticity to make it do the job and I'm not sure where you might source it.  

Would be a good 'gadget' IMO for our repair community to sell at festivals- say as a £5 £10 (don't want to under cut anyone!) job. High added value to a piece of of hose- mostly it's fitting it. While a player could buy several lengths of stuff and experiment himself - what's he going to do with the offcuts?
Logged
  _       _    _      _ 

ganderbox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 734
  • Melodeons from Brittany, Italy, Germany* and Leeds
    • www.choughedtobits.co.uk
Re: Strap Buckle Protectors (Again)
« Reply #4 on: November 16, 2009, 09:44:38 AM »

My new one this year came with a piece of elastic tubing coaxially over the strap. You adjust the buckle and then slide the tube back down over it to cover the metal. Works well, but you need a the right fit/elasticity to make it do the job and I'm not sure where you might source it.   


I got a pair of these with my Loffet, and they work fine. You can buy them from his eBay shop for 3 euros plus postage.
Logged
Pauline from Cornwall

*  including a customised Hohner Club from Cornwall (and very nice it is too!).

Simon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
  • Serenellini Selli C/F and Gold98 G/C
Re: Strap Buckle Protectors (Again)
« Reply #5 on: November 16, 2009, 10:18:00 AM »

My melodeon dealer glues a small piece of felt to a tube and slides it over the buckle. The 'deluxe' version has a small slit for the belt so it can't move. My wife will crochet something fancier though.  (:)
Logged

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Strap Buckle Protectors (Again)
« Reply #6 on: November 17, 2009, 04:24:26 PM »

And then there's the El Cheapo version ....  I have soft/split "fur" tubes, joined together with velcro, which I use to stop my car safety belt cutting into me, obtained a great expense from my local Pound Shop at their usual price for two. They are (were?) available in various colo(u)rs from violent pink (for the Hell's Bunnies musicos) to sheer black for Lancre Morris'.  :||: :M :M :M :M

PS> They also do handbrake covers in the same material, but I wouldn't have a clue what to do with a pink fluffy cylinder several inches long.  :|bl

Chris.
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.

Tony M

  • Good talker
  • **
  • Offline Offline
  • Posts: 65
Re: Strap Buckle Protectors (Again)
« Reply #7 on: November 20, 2009, 12:59:25 PM »

Hi.

First posting, so "Hello" to all.

Being permanently reluctant to spend money on trivia, I made the ones on my Weltmeister PA from a pair of old leather gloves:  Chop a finger off, then remove the end, and you have a leather tube.  Punch four holes round the circumference at each end, thread a thin strip of leather through (like a shoelace), slot over the strap and tie in place.  Not so trendy (or convenient) as velcro, but kept me occupied for an hour or so, does the job, and matches the straps rather well.

May depend on the size of your old gloves, of course . . .  ;)

Cheers,

Tony
Logged

Ken Nelson

  • knotnut
  • New Starter
  • Offline Offline
  • Posts: 1
Re: Strap Buckle Protectors (Again)
« Reply #8 on: August 06, 2010, 10:36:49 PM »

Hi this is my first post as well. I had the same problem with my buckles and as my other hobby is knot tying I covered them with standing Turk's heads tied in cotton twine. It works but once thy are on thy can only be removed by destroying the knot..
I do think that more thought should be put into the Design by the manufacturers. My box is a Castagnary Trilly which is beautifully made and finished and I think deserves better than the straps supplied. Ships and hapeths of tar come to mind.
Logged
Ken nelson.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal