Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: LHS Free bass mechanism?  (Read 656 times)

0 Members and 1 Guest are viewing this topic.

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
LHS Free bass mechanism?
« on: May 31, 2023, 11:58:48 AM »

Hi All,

Is there any information (or at least detailed photos) of a simple (but high quality) LHS free bass mechanism that one can make himself? I.e. 1 button responsible for 1 pallet?

I've seen a very simple option where a brass rod gets wrapped around an axle, with one end connected to a pallet and another one being pushed by a button's push-rod, but I've got some concerns on the wrapping around the axle bit: do it too tight, and there's too much friction. Too loose, and the pallet will be wobbly and have a risk of not seating properly.
Perhaps, wrapping the rod around a brass bearing might be a better option?.. Open to any ideas.

Thanks!
Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: LHS Free bass mechanism?
« Reply #1 on: June 01, 2023, 02:20:44 PM »

Carini supplies at least one way of doing this, first you have this kind of part, that lifts the pallet:
https://carinidena.it/MS5ECOMMERCE60/files/articoli/30150003-01.jpg

Notice that on the upper part, there is a flat section with a hole, you set this piece in:
https://carinidena.it/MS5ECOMMERCE60/files/articoli/34213-01.jpg

This small part hosts the lever that goes into the button, that you lock with a screw at the desired position (it's quite easy to adjust the position of the rod then). It's that kind of rod:
https://carinidena.it/MS5ECOMMERCE60/files/articoli/340018180-01.jpg

It's not really cheap per se (around 2€ per set) but it works.

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: LHS Free bass mechanism?
« Reply #2 on: June 01, 2023, 04:28:12 PM »

Thank you very much.
Seems a bit over-engineered...

I think I might have answered my own question, as I found this photo.


Essentially, it looks like a standard roller mechanism, but the rollers are short and stacked diagonally, so you can pack a small roller for every note into the box.
Logged

-Y-

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 896
  • Handry 18 (G/C), Mélodie (D), Club IIb (A/D)
    • a database of nearly 500 melodeons here
Re: LHS Free bass mechanism?
« Reply #3 on: June 01, 2023, 08:37:47 PM »

Seems a bit over-engineered...
It's just two rods connecting to each other really, but I'm glad you found what would suit you best, interesting diagonal layout!
On what box did you find it ?

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: LHS Free bass mechanism?
« Reply #4 on: June 02, 2023, 10:28:40 AM »

Just a photo from the internet.
I believe this might be a Russian "Hromka" with an LHS register switch that allows switching 1 vs 2 voices through mechanical linkages, as opposed to the slider mechanism.

But I might be wrong.

The overengineering seems to be in how the rods are joined.
... Also, I will potentially be looking for about 52 notes with two buttons opening 1 pallet, which brings it to 104 rods and a EUR 208 bill :-[
« Last Edit: June 02, 2023, 10:31:51 AM by mChavez »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal