Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: High quality reeds?  (Read 980 times)

0 Members and 1 Guest are viewing this topic.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
High quality reeds?
« on: June 01, 2023, 12:58:12 PM »

Whilst jealously perusing the Pariselle melodeon for sale thread, I couldn't help but notice that the Binci Professional reeds looked to be ground transversely, whereas I'd always been of the understanding that high quality reeds were ground longitudinally.
Have I been wrong all this time?
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: High quality reeds?
« Reply #1 on: June 01, 2023, 01:55:57 PM »

It hasn't been fettled in my ownership, Winston, but I don't know about beforehand.  I didn't buy it through Melnet or a dealer. No doubt Rees or Theo will know the score at the time of construction  (2008).  An interesting question, indeed.
Logged

Gonk

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 507
  • (Mudlark Music)
    • Mudlark Music
Re: High quality reeds?
« Reply #2 on: June 01, 2023, 02:17:12 PM »

I think it's a loss in translation between the "grain" of the steel and the "grind" of the tuning.  The reeds are cut from ribbon steel (longitudinal grain) and then rough-tuned by being sanded to pitch across the grain (which could give the appearance of transverse grain).  The old saw is to look for the location of the bluing on the base, since it indicates the reed was cut from ribbon steel (higher quality) rather than stamped from a large sheet, with transverse grain.
Logged
Mudlark Music - restoration, repairs, lessons, and sales.  (USA)  http://mudlark-music.com

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: High quality reeds?
« Reply #3 on: June 01, 2023, 02:44:11 PM »

rileycat, please don't imagine that I was criticising your reeds! It was just a general observation and genuinely generic question. As I said, I was 'jealousy' perusing. I'd love to own such a beast.

Gonk, thanks for your easy explanation. Reading it rang bells in my head from my very early curiosity regarding reeds.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: High quality reeds?
« Reply #4 on: June 01, 2023, 03:51:03 PM »

Quote
The reeds are cut from ribbon steel (longitudinal grain) and then rough-tuned by being sanded to pitch across the grain (which could give the appearance of transverse grain).

Not always across the grain.  Older Dix reeds had the grinding along the grain. http://forum.melodeon.net/index.php/topic,26348.msg314343.html#msg314343
Logged

rileycat

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 429
Re: High quality reeds?
« Reply #5 on: June 01, 2023, 05:40:39 PM »

Re-reading my reply, Winston, I apologise that it seemed a bit perfunctory. Rest assured it didn't occur to me that you were being critical, it seemed a good question and I just wanted to say that,  as the current holder of this Pariselle, I couldn't help with any tuning history to shed further light on the query.
It looks like Gonk has a handle on things, though.
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: High quality reeds?
« Reply #6 on: June 23, 2023, 09:18:30 PM »

Very interesting topic, as up until this moment I did not know that metal was not uniform and had grain  :o

If I understand correctly from reading about it, grain refers to the cold rolling process, where the metal's crystalline grains are stretched when it's being drawn? That makes sense, but what practical impact does it have on a reed? You cut the reed, thickness it, rivet, cold-set the reed gap and then it's never meant to be cold-set ever again in its lifetime. With the grain/across the grain only seems to affect the metal's ability to be cold set and its resistance to work hardening from what I've managed to read so far.

Apologies if this is a daft question - I am absolutely clueless when it comes to metal.

None of this seems to apply to a reed after it's been gapped:
The Fabricator.com points out that,

“Forming with the grain requires less bending force because the material’s ductility is readily stretched. But this stretching causes the grains to spread, which manifests as cracking on the outside bend radius. To prevent or at least reduce this cracking when bending longitudinal to the grain direction, you may need to use a larger bend radii. When bending transverse to the grain direction, the reduced ductility will increase the required forming tonnage, but it will be capable of accepting a much tighter inside bend radius without destroying the outside surface of the bend.”
« Last Edit: June 23, 2023, 09:31:09 PM by mChavez »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal