Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Straightening bent grilles.  (Read 632 times)

0 Members and 1 Guest are viewing this topic.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Straightening bent grilles.
« on: June 11, 2023, 07:50:37 PM »

I can get Hohner HA112/3/4 grilles back to shape reasonably easily and I've done a little video that I must edit before posting.
But pokerwork or club II grilles confound me. Once they are bashed out of shape I find it impossible to get it back. I know a dent from the 30s is part of its history but I'd rather make it look like it did fresh out of the factory (ish).
The raised area seems to stretch and distort with the slightest touch so it doesn't sit flat.
I'm not a sheet metal worker (though I did some silversmithing as part of my course at art college) so any tips would be welcome.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Straightening bent grilles.
« Reply #1 on: June 11, 2023, 08:15:12 PM »

It is often the turned edge that causes the problems.  If you can straighten out any obvious kinks there it can help.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Straightening bent grilles.
« Reply #2 on: June 11, 2023, 10:19:35 PM »

Rubber mallet and blocks of wood. But it’s v difficult to get back to the ex factory look.

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Straightening bent grilles.
« Reply #3 on: June 12, 2023, 09:56:36 AM »

I'm pretty much following Theo's and Rog's suggestions.
I can see it's never going to be easy to get a good result. Once the metal has stretched, nothing is going to look flat and shrinking it is an impossible task.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal