Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Tuning that C5 up a whole tone - De-clubbing (or Dutch-modifying!) a Club box  (Read 1814 times)

0 Members and 1 Guest are viewing this topic.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711

Hello,

So, I've been playing around on the Club II recently, avoiding the Gleichton button, to see how I get on with using the push C / pull D on the outside row for conventional push-pull style playing (with the odd pull C sneaking in where I can see that it is particularly useful - funnily enough usually over the Pull Bb! Hmm)...

This being not quite as troublesome as I expected, I'm about 80-90% sold on the idea of Dutch reversal, for the fullest diatonic functionality (I would then use PA reeds for unisonoric C# and Eb on accidentals row)...

So far, any tuning I have done has been at most a change of +/- 30 cents. For this I have utilised a ground down drill bit for tuning down, and a standard Draper needle file for tuning up, no problems. However, I am now looking at tuning up over a whole tone, as well as reconfiguring the notes on the first 3 buttons (eg low Dutch reversal C/E to D/E), so I think it might be time to upgrade tools!?..

I would like to know what tools you recommend for this job, and whether different graded files are required depending on how dramatic the changes in pitch. Also, I have clicked on links to recommended files before, but then have to select specific file shapes, so I get stuck, not knowing which shape to buy!.. Your thoughts and perhaps some links appreciated...

Thanks!

« Last Edit: June 18, 2023, 08:20:14 PM by Arnold »
Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

Yes it’s pushing things to tune that C to D but it can be done.  My preferred tool for the bulk of the filing is a second cut 6” flat file.  Choose a good make and it will last for years. Vallorbe is one of the best but there are there are other good makes too.
https://www.cooksongold.com/Jewellery-Tools/Vallorbe-152mm6-Flat-File,-Cut-2-prcode-999-458
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711

Thanks Theo! When you say the bulk of the filing, is there anything in particular you wouldn’t use this one for, eg fine tuning?.. Is it good for all the reeds from bass all the way up through the treble?..

Also, is there a different file that you use for filing the rivet end of a reed (eg tuning down one of a pair of PA reeds by a semitone), or do you always use scrapers for tuning reeds down?..

Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

I meant the bulk of filing of the C to D.  I regularly use a small variety of files:

Vallorbe needle files
Vallorbe saw files (from Axminster tools)
And a couple of 600 grit diamond needle files.  There’s a lot of very poor quality diamond files with uneven coating so you might have to try a few.  The kind I use are no longer available unfortunately.  As with most tools you get what you pay for.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711

I see, yes of course, perhaps I was being a little hopeful!.. hmm, might be an idea to see if I can get something like that as part of a set then... I want to make sure I get it right the first time, and have all the right notes in all the right places (eg the missing low Bb and so on...) I'm going 4th button start too, so there's a bit of work to do!.. Thanks
« Last Edit: June 18, 2023, 09:44:47 PM by Arnold »
Logged
Dancing about architecture since 1997

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711

Quick question about reed filing… Is there a consensus as to the best angle at which to file the reed? Is it at right angles to the reed length, or at some kind of diagonal, or perhaps along it’s length?..
Logged
Dancing about architecture since 1997

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner

I don't know about anyone else, but using a proper file I try to file along the reed when I'm taking a lot of metal off, like a semitone.
For small increments, a few cents, I use a diamond file across the reed.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

Same here, for removing a lot of metal I go as near lengthwise as possible, filing away from the rivet.  If you file heavily across the reed you risk moving it at the rivet, and if you are taking it down to very thin (as in C to D) there is a risk that the file can snag the edge and seriously bend the reed.  When doing final tuning in situ the limited access to the reed will dictate the direction of filing.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

Diamond file quality.  Good quality on the left
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711

Great info, makes sense… I’ll try to wrap everything up in a single thread so bear with me!.. Is there a particular size, shape etc of diamond needle file (is there more I need to know than 600 grit?) which would make kind of a good all-rounder? (I noticed CGM tuning set only includes one file)…

Also, back to what I mentioned about tuning reeds down by increments of a semitone or perhaps more, are scrapers or files preferable for this? (My potential layout has lots of semitone buttons at the low end of keyboard eg G#/A, so I’m thinking PA reeds for this)…
« Last Edit: June 19, 2023, 01:22:30 PM by Arnold »
Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

There is a lot of personal preference in tools and how to use them,  so I recommend trying out to find what suits you.  As with any skill we are are all different and developing a skill is as much about learning about yourself as learning about tools and materials. Trial and error is a great teacher.  I’m not trying to be secretive about what I do, but when you get down to the subtle details there is a variety of things that will work in different circumstances.

I will offer one other observation.  When tuning Reed’s down you have a choice between tip loading and filing near the root.  Low pitch reeds are already pretty thin towards the rivet end and it’s best to avoid making them thinner.  If you do the pitch will drop significantly as you increase playing volume. So for these tip loading is usually preferable. Higher pitch reeds are thinnest at the tip and can be lowered by filling without detriment. The very highest reeds may go down several semitones and still sound and respond well.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711

Thanks Theo, ah yes, how could I forget about tip loading?!.. I even did this to a low E/G reedplate, in order to make C/G bass for a toy melodeon. I can report that (not surprisingly) a major 3rd is a bit too much of a drop in pitch, although I’m not sure if it was the tip loading itself that was responsible for loss of tone, or the inherent limitations of the box!.. A semitone should be no problem at all… So, I think I’ll go with just the 2 specific files that you mentioned for now, and see how I get on!.. Cheers!
Logged
Dancing about architecture since 1997

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions

There is a lot of personal preference in tools and how to use them,  so I recommend trying out to find what suits you.  As with any skill we are are all different and developing a skill is as much about learning about yourself as learning about tools and materials. Trial and error is a great teacher.  I’m not trying to be secretive about what I do, but when you get down to the subtle details there is a variety of things that will work in different circumstances.

I will offer one other observation.  When tuning Reed’s down you have a choice between tip loading and filing near the root.  Low pitch reeds are already pretty thin towards the rivet end and it’s best to avoid making them thinner.  If you do the pitch will drop significantly as you increase playing volume. So for these tip loading is usually preferable. Higher pitch reeds are thinnest at the tip and can be lowered by filling without detriment. The very highest reeds may go down several semitones and still sound and respond well.

That is some seriously good advice Theo, you should pin it somewhere on the site or trumpet it all over Facebook or something.
I really couldn't have put it better myself.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

Thanks Rees
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place

… So, I think I’ll go with just the 2 specific files that you mentioned for now, and see how I get on!.. Cheers!

Good plan.

I used the Vallorbe saw files almost exclusively for a long while.  They don’t stay sharp very long when filing reed steel, so keep a few spare!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama

I used the Vallorbe saw files almost exclusively for a long while.  They don’t stay sharp very long when filing reed steel, so keep a few spare!
I hate the transition from an old file to a new one. They seem to settle into a mid life groove where you can kind of expect the effect of your filing and easily reach your required destination but eventually, when you replace the file, you have to get to know it all over again.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711

Alright then, I’ll do a little bit of shopping around based on this information, and make a purchase or two by the end of the week… In the meantime I’d better just get on and finish off the tuning bellows (new thread incoming!..) Many thanks (and any additional thoughts and opinions welcome!..)
« Last Edit: June 19, 2023, 07:24:05 PM by Arnold »
Logged
Dancing about architecture since 1997
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal