Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Making tuning bellows - hole placement and sizes  (Read 1054 times)

0 Members and 1 Guest are viewing this topic.

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Making tuning bellows - hole placement and sizes
« on: June 19, 2023, 09:34:01 PM »

I’ve almost finished making a set of tuning bellows using the bellows of an old, very broken but airtight Hohner Student I PA.  I just need to drill the necessary holes in the top and stick it on! I have to get this right because once it’s on I don’t think it’s coming off!.. I have lined everything up with the centre (the area at one end is overlap for gripping. I have marked out two holes to be used for the ‘0’ and ‘+’ reed pair (diameter 10mm) as well as for chord reeds, and a single hole for bass reeds (18mm). Is this correct? Have I missed anything? Do I even need a seperate hole for bass reeds? (I wondered whether too narrow a hole might affect pitch slightly somehow). I have attached a picture of the top for your perusal!.. Cheers
Logged
Dancing about architecture since 1997

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Making tuning bellows - hole placement and sizes
« Reply #1 on: June 19, 2023, 09:42:12 PM »

The size of hole does affect pitch,  the thickness of the board makes a difference too. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Making tuning bellows - hole placement and sizes
« Reply #2 on: June 19, 2023, 09:47:57 PM »

Ok, so I’ll stick with the three holes then. I read about thickness making a difference before, so I used 3-ply wood that seemed to match the wood inside the Student I (and I’m assuming is the standard for other boxes?..) Does the placement for the holes look about right?..
Logged
Dancing about architecture since 1997

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Making tuning bellows - hole placement and sizes
« Reply #3 on: June 19, 2023, 10:43:36 PM »

I have made a separate piece to give specific hole patterns. The main hole is a bit too big though it's right for bass reed blocks
It's just a scrap of ply about the same thickness as a typical Fondo.
I cut a triangular hole for chord reed blocks and various others. To seal I used bellows gasket stuff. It's easy to section off the various apertures so for an odd shape or new diameter hole it is easy to  add a bit of gasket.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Squeaky Pete

  • Squeaky Pete
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1327
  • Re-hohn a Hohner
Re: Making tuning bellows - hole placement and sizes
« Reply #4 on: June 20, 2023, 09:13:19 AM »

Here is my setup with the bits and bobs.
The current one for tuning on the blocks (if I need to) especially adjusting chord reeds is on the left.
Next is an adjustable one for any normal size reeds. I pop it in the frame and hold it down with the pallet over the non operating tongue.
Then it's my first ever attempt. One or two are still useful sizes, but it shows what you can do if you can't be arsed to get proper tools out
Then it's a bass reed frame, rarely used, and the current bassreed holder which also has the high bass reed.
There's some more that I can't find at the moment that hold PA bass reeds which are a bit smaller than what I usually play with , and some Liliput sized stuff too.
When I'm doing a lot of a particular sort, like bringing a whole set up to A 440, I tack the relevant frame over the bellows hole with hot melt glue. Easy to clean off.
Logged
Poker work DG.
Pariselle 2.6 DG, Ex-Club IIIBS CF,
Matching Liliputs in CF and DG,
Lots of sickly Hohners needing TLC,
Bassoon, Various Bagpipes........

Arnold

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
Re: Making tuning bellows - hole placement and sizes
« Reply #5 on: June 20, 2023, 01:13:06 PM »

Great stuff Pete, hmm, I hadn’t really thought too much about tuning reedplates off of the reedblocks… I like the idea of interchangeable attachments for various sizes and so on, that’s pretty neat. I suppose if I get on and make the one I have measured out, I could then make up some other attachments later on… Mine is a very compact design, just the size of the bellows, with the holes on the top, and weighted at the bottom to keep in on the worktop…
Logged
Dancing about architecture since 1997

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Making tuning bellows - hole placement and sizes
« Reply #6 on: June 20, 2023, 02:25:21 PM »

Pete's set up looks great, and I'm sure suits his style of working. I'm a bit rougher, I'm sorry to say, and manage with pretty rudimentary gear, but that I find comfortable to work with in spite of that.
I still have (and use) the first bellows set (hand operated) I made for hanging off the end of a bench or counter top. The bellows came from an old black 2 row, and it's been further modified by cutting out the top plate of thickish ply to the same size as the internal bellows, then screwing on a, thinner plywood, top faceplate. I use this lot mainly when I'm drastically altering bass reeds, with a bit of tape stuck across the small hole.

Then I made the 'U' shaped thing for hanging half a melodeon on for tuning 'on the job', so to speak. But I also built a foot operated bellows which mounted under the kitchen counter top benches in my little workshop. This only has two holes which match most of the twin reedblock holes I've come across. Again, this has a bellows sized hole in the benchtop, with a thinner top plate screwed on.

When tuning with these two sets, I hold the reedplates on spare reedblocks which I've collected over the years.
« Last Edit: June 20, 2023, 02:30:21 PM by Winston Smith »
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal