Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: modifying Erica blocks for LM configuration  (Read 929 times)

0 Members and 1 Guest are viewing this topic.

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
modifying Erica blocks for LM configuration
« on: July 04, 2023, 06:06:26 PM »

I'm in the process of modifying a set of Hohner Erica reedblocks to accept LM reeds, instead of the usual MM configuration.  Typically, I would have a 'matching' arrangement of blocks in the instrument, meaning that if you looked down at them from above they would be 'LM', 'LM', but I'm concerned about the (probably unlikely) scenario of having the weighted tips of the inside L reeds making contact with the M reeds of the opposite block.  I suppose a safe way to go about it would be to just keep both sets of L reeds on the outside of each block? I'm thinking the difference in tone (with the one set of L reeds getting the least amount of pallet lift while the other row's L reeds get the largest amount of lift) would be negligible?  I'm sure more than a few folks have made this mod on an Erica and would appreciate input.  Cheers.
« Last Edit: July 04, 2023, 06:08:57 PM by mselic »
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: modifying Erica blocks for LM configuration
« Reply #1 on: July 04, 2023, 06:28:34 PM »

If it’s a problem you can sand a small angle on the underside of the blocks so they lean away from each oither.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: modifying Erica blocks for LM configuration
« Reply #2 on: July 04, 2023, 06:42:20 PM »

If it’s a problem you can sand a small angle on the underside of the blocks so they lean away from each oither.

But do you see any issue with the L reeds being mounted on the outside of each block instead? (LM, ML configuration when looking down at the blocks in situ).
Logged
C#/D player

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: modifying Erica blocks for LM configuration
« Reply #3 on: July 04, 2023, 07:45:11 PM »

I have an LM box built on a course with Emmanuel Pariselle it is very similar in size to to a pokerwork and there is no problem with reed tips making contact. 
I don’t think there would be a problem putting the L reeds facing away from each other, but take care they don’t make contact with the bellows or bellows frame.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: modifying Erica blocks for LM configuration
« Reply #4 on: July 04, 2023, 08:12:04 PM »

I've made one of these ( https://www.youtube.com/watch?v=rONFTyBGCJQ ), will have a look tomorrow and get back to you.

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: modifying Erica blocks for LM configuration
« Reply #5 on: July 04, 2023, 08:25:27 PM »

It's easy enough to measure the amplitude of the reed tip on your tuning table. Even I manage it with my Heath Robinson equipment when I'm playing at making Frankenstein boxes.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: modifying Erica blocks for LM configuration
« Reply #6 on: July 05, 2023, 11:34:25 AM »

Had a look at mine and what I did was mount the L reeds on the outside of the blocks. Pics HERE

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: modifying Erica blocks for LM configuration
« Reply #7 on: July 05, 2023, 02:05:31 PM »

Here is a Pariselle LM with sone measurements. The L reeds are all on the furthest side of their blocks from the keyboard so they get maximum pallet lift.  That is important to get a good response from the low reeds, and especially so with LM tuning so that the L and M reeds remain in tune over the largest range of playing pressure.
Space between facing reed tips is 11.5mm for the largest reeds. Space between the top edge of reed plates is 15mm
« Last Edit: July 05, 2023, 02:43:39 PM by Theo »
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal